1 - 500 out of 575Page size: 500
  1. 2025

  2. Thermal cycling stability of the B2 ←→ B19’ transformation in the Ti-Hf-Ni-Cu alloys with cast and ultrafine-grained structures

    Реснина, Н. Н., Беляев, С. П., Базлов, А. И., Сибирев, А. В., Иванов, А. М., Поникарова, И. В., Трофимова, М. Е., Бикбаев, Р. М., Орлов, В. Е. & Данилов, Д. В., 1 Mar 2025, In: Letters on Materials. 15, 1, p. 8-14 7 p.

    Research output: Contribution to journal › Article › peer-review

  3. Mechanical behaviour of low-, medium- and high-entropy Ti-Hf-Zr-Ni-Cu-Co shape memory alloys

    Реснина, Н. Н., Беляев, С. П., Поникарова, И. В., Бикбаев, Р. М., Базлов, А. И., Иванов, А. М., Калганов, В. Д., Стародубова, М. С. & Ребров, Т. В., 5 Jan 2025, In: Journal of Alloys and Compounds. 1010, 177479.

    Research output: Contribution to journal › Article › peer-review

  4. Influence of the grain size on the martensitic transformation and strain nanodomains in the Ti-Hf-Ni-Cu shape memory alloy

    Беляев, С. П., Реснина, Н. Н., Базлов, А. И., Сибирев, А. В., Поникарова, И. В., Иванов, А. М., Бикбаев, Р. М., Трофимова, М. Е., Гундеров, Д. В., Калганов, В. Д. & Строчко, И. В., 1 Jan 2025, In: Materials Today Communications. 42, 111125.

    Research output: Contribution to journal › Article › peer-review

  5. 2024

  6. Grain growth in Ni50Ti30Hf20 high-temperature shape memory alloy processed by high-pressure torsion

    Shuitcev, A. V., Ren, Y., Gunderov, D. V., Vasin, R. N., Li, L., Valiev, R. Z., Zheng, Y. F. & Tong, Y. X., Dec 2024, In: Materials Science and Engineering: A. 918, 147478.

    Research output: Contribution to journal › Article › peer-review

  7. Lead Catalyzed GaAs Nanowires Grown by Molecular Beam Epitaxy

    Штром, И. В., Сибирёв, Н. В., Сошников, И. П., Илькив, И. В., Убыйвовк, Е. В., Резник, Р. Р. & Цырлин, Г. Э., 21 Nov 2024, In: Nanomaterials. 14, 23, 1860.

    Research output: Contribution to journal › Article › peer-review

  8. Surface Plasmon Polariton Photoluminescence Enhancement of Single InP Nanowires with InAsP Quantum Wells

    Шугабаев, Т., Гридчин, В. О., Мельниченко, И., Булкин, П., Абрамов, А., Kuznetsov, A., Максимова, А., Новиков, И., Хребтов, А. И., Убыйвовк, Е. В., Котляр, К. П., Крыжановская, Н., Резник, Р. Р. & Цырлин, Г. Э., 13 Nov 2024, (E-pub ahead of print) In: Physica Status Solidi - Rapid Research Letetrs. 2400296.

    Research output: Contribution to journal › Article › peer-review

  9. Defect Structure and Luminescence of κ-Ga2O3 Micro-Monocrystals

    Vyvenko, O. F., Shapenkov, S. V., Ubyivovk, E. V., Bondarenko, A. S., Varygin, G. V., Pechnikov, A. I. & Nikolaev, V. I., 24 Oct 2024, In: Physica Status Solidi (B) Basic Research.

    Research output: Contribution to journal › Article › peer-review

  10. Features of silver nanoparticle synthesis and interaction with dibutyl phthalate in aqueous solutions for sensor applications

    Кулагина, А. С., Шугабаев, Т., Evstropiev, S. K., Кузнецов, А., Убыйвовк, Е. В., Shmakov, S. V., Березовская, Т. Н., Bukatin, A. S., Цырлин, Г. Э. & Данилов, В. В., 1 Oct 2024, In: Journal of Optical Technology (A Translation of Opticheskii Zhurnal). 90, 10, p. 630-636

    Research output: Contribution to journal › Article › peer-review

  11. Synthesis and optical properties of perovskite nanocrystals in glass with cationic substitution

    Кузнецова, М. С., Колобкова, Е., Батаев, М. Н., Бердников, В. С., Панькин, Д. В., Смирнов, М. Б., Убыйвовк, Е. В. & Игнатьев, И. В., 28 Sep 2024, In: The Journal of Chemical Physics. 161, 12, p. 124501-124511 11 p., 161.

    Research output: Contribution to journal › Article › peer-review

  12. Ultra-high temperature Ti-Hf-Zr-Ni-Cu-Co shape memory alloy

    Сибирев, А. В., Беляев, С. П., Реснина, Н. Н., Поникарова, И. В., Бикбаев, Р. М., Базлов, А. И., Калганов, В. Д. & Иванов, А. М., 1 Sep 2024, In: Materials Letters. 370, 136847.

    Research output: Contribution to journal › Article › peer-review

  13. Structural and spectroscopic studies of epitaxially overgrown GaN, n-GaN, and n+ -GaN contact layers

    Середин, П. В., Goloshchapov, D. L., Kostomakha, D. E., Peshkov, Y. A., Buylov, N. S., Gaivoronskaya, A. A., Мизиров, А. М., Timoshnev, S. N., Sobolev, M. S., Убыйвовк, Е. В., Zemlyakov, V. I., Kutsko, P. P. & Parmon, P. L., 12 Jul 2024, In: Condensed Matter and Interphases. 26, 3, p. 526-535 10 p.

    Research output: Contribution to journal › Article › peer-review

  14. Comparative studies of GaN, n-GaN and n+-GaN contact layers on GaN/c-Al2O3 virtual substrates synthesized by PA MBE

    Seredin, P. V., Goloshchapov, D. L., Kostomakha, D. E., Peshkov, Y. A., Buylov, N. S., Ivkov, S. A., Mizerov, A. M., Timoshnev, S. N., Соболев, М. С., Убыйвовк, Е. В. & Zemlyakov, V. I., 1 Jun 2024, In: Optical Materials. 152, 115471.

    Research output: Contribution to journal › Article › peer-review

  15. The effect of replacing molybdenum with vanadium on the tendency to amorphisation, structure and thermal properties of high-entropy alloys of the Fe–Co–Ni–Cr–(Mo,V)–B system

    Базлов, А. И., Строчко, И. В., Занаева, Э. Н., Убыйвовк, Е. В., Пархоменко, М. С., Милькова, Д. А. & Брюханова, В. В., 14 May 2024, In: Metallurgist. 67, 11-12, p. 1695-1704 10 p.

    Research output: Contribution to journal › Article › peer-review

  16. Palladium-free multicomponent high temperature shape memory alloys

    Resnina, N., Belyaev, S., Bazlov, A., Ponikarova, I., Sibirev, A., Ivanov, A., Bikbaev, R. & Strochko, I., 1 Apr 2024, In: International Journal of Engineering Science. 197

    Research output: Contribution to journal › Article › peer-review

  17. Низкотемпературный рост нитевидных и пластинчатых нанокристаллов InAs на подложках Si(100)

    Корякин, А. А., Убыйвовк, Е. В., Котляр, К. П., Лендяшова, В. В., Резник, Р. Р. & Цырлин, Г. Э., 6 Mar 2024, In: Technical Physics Letters. 50, 7, p. 27-30 4 p.

    Research output: Contribution to journal › Article › peer-review

  18. СТРУКТУРА ДОМЕННЫХ И АНТИФАЗНЫХ ГРАНИЦ В κ-ФАЗЕ ОКСИДА ГАЛЛИЯ

    Вывенко, О. Ф., Бондаренко, А. С., Убыйвовк, Е. В., Шапенков, С. В., Печников, А., Николаев, В. И. & Степанов, С. И., 15 Feb 2024, In: КРИСТАЛЛОГРАФИЯ. 69, 1, p. 34-39 6 p.

    Research output: Contribution to journal › Article › peer-review

  19. The Structure of Domain and Antiphase Boundaries in κ-Phase of Gallium Oxide

    Вывенко, О. Ф., Бондаренко, А. С., Убыйвовк, Е. В., Шапенков, С. В., Pechnikov, A., Nikolaev, V. & Степанов, С. И., 1 Feb 2024, In: Crystallography Reports. 69, 1, p. 23–28 6 p.

    Research output: Contribution to journal › Article › peer-review

  20. Influence of Rolling and Annealing on the Structure and Properties of the Medium-Entropy Ti40Hf5Zr5Ni40Cu5Co5 Shape Memory Alloys

    Реснина, Н. Н., Беляев, С. П., Базлов, А. И., Бикбаев, Р. М. & Калганов, В. Д., 2024, In: Crystallography Reports. 69, p. S61-S65 5 p.

    Research output: Contribution to journal › Article › peer-review

  21. Stability of the B2 ↔ B19′ martensitic transformation on thermal cycling of Ti-Hf-Ni-Cu thin ribbons

    Беляев, С. П., Реснина, Н. Н., Убыйвовк, Е. В., Шеляков, А. В. & Поникарова, А. Н., 2024, In: Materials Letters. 357, 135770.

    Research output: Contribution to journal › Article › peer-review

  22. ВЛИЯНИЕ КОНЦЕНТРАЦИИ ДОБАВОЧНЫХ ЭЛЕМЕНТОВ НА ФУНКЦИОНАЛЬНЫЕ СВОЙСТВА СПЛАВА Ti50-2XHfXZrXNi50-2XCoXCuX

    Поникарова, И. В., Беляев, С. П., Реснина, Н. Н., Базлов, А. И., Ребров, Т. В., Стародубова, М. С., Кальницкая, М. В. & Березовская, С. В., 2024, АКТУАЛЬНЫЕ ПРОБЛЕМЫ ПРОЧНОСТИ Материалы LXVIII международной научной конференции (Витебск, 27-31 мая 2024 года) Посвящается 75-летию со дня рождения члена-корреспондента НАН Беларуси, доктора технических наук, профессора Рубаника В.В.. ИВЦ Минфина, p. 286 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research › peer-review

  23. Изменение функциональных свойств при термоциклировании литого сплава Ti40,7Hf9,5Ni44,8Cu5

    Поникарова, И. В., Беляев, С. П., Реснина, Н. Н., Базлов, А. И., Сибирев, А. В. & Трофимова, М. Е., 2024, XXIV Петербургские чтения по проблемам прочности и III молодежная школа-семинар «Механика, химия и новые материалы» 23-25 апреля 2024 года, Санкт-Петербург, Россия. Издательство «ВВМ»

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research › peer-review

  24. МЕХАНИЗМ РОСТА ЭПИТАКСИАЛЬНЫХ СЛОЕВ GA2O3 МЕТОДОМ ХЛОРИД-ГИДРИДНОЙ ЭПИТАКСИИ НА ПОДЛОЖКЕ SIC/SI (110)

    Кукушкин, С. А., Осипов, А. В., Убыйвовк, Е. В., Осипова, Е. В. & Шарофидинов, Ш. Ш., 2024, (Accepted/In press) In: ФИЗИКА ТВЕРДОГО ТЕЛА.

    Research output: Contribution to journal › Article › peer-review

  25. Эволюция структуры при превращении Si в SiC методом самосогласованного замещения атомов

    Кукушкин, С. А., Воробьёв, М. Г., Осипов, А. В., Гращенко, А. С. & Убыйвовк, Е. В., 2024, In: ФИЗИКА ТВЕРДОГО ТЕЛА. 66, 7, p. 1133-1143

    Research output: Contribution to journal › Article › peer-review

  26. Эффекты самоорганизации при выращивании нитевидных нанокристаллов InGaN методом молекулярно-пучковой эпитаксии с плазменной активацией азота

    Резник, Р. Р., Гридчин, В. О., Котляр, К. П., Убыйвовк, Е. В., Кукушкин, С. А. & Цырлин, Г. Э., 2024, Труды XXVIII Международного симпозиума НАНОФИЗИКА И НАНОЭЛЕКТРОНИКА . Институт прикладной физики РАН, Vol. 2. p. 623-624 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  27. 2023

  28. The influence of the chemical composition of the Ti-Hf-Zr-Ni-Cu-Co shape memory alloys on the structure and the martensitic transformations

    Resnina, N., Belyaev, S., Sibirev, A., Ponikarova, I., Ivanov, A., Bikbaev, R., Rebrov, T., Starodubova, M., Berezovskaya, S., Kalnitskaya, M., Bazlov, A., Andreev, V. & Kalganov, V., 1 Dec 2023, In: Journal of Alloys and Compounds. 968, 172040.

    Research output: Contribution to journal › Article › peer-review

  29. Структура и рекомбинационные свойства двойниковых границ в к-фазе оксида галлия

    Вывенко, О. Ф., Бондаренко, А. С., Убыйвовк, Е. В., Шапенков, С. В., Печников, А., Николаев, В. И. & Степанов, С., Dec 2023, In: ФИЗИКА ТВЕРДОГО ТЕЛА. 65, 12, p. 2194 4 p.

    Research output: Contribution to journal › Conference article › peer-review

  30. Structure and Properties of Amorphous Quasi-High-Entropy Fe-Co-Ni-Cr-(Mo,V)-B Alloys with Various Boron Content

    Базлов, А. И., Строчко, И. В., Убыйвовк, Е. В., Пархоменко, М. С., Магомедова, Д. К. & Занаева, Э. Н., 15 Aug 2023, In: Metals. 13, 8, 12 p., 1464.

    Research output: Contribution to journal › Article › peer-review

  31. Effect of Texture on Strain Localization and Crack Initiation in Polycrystalline Beryllium Under Static Tension: Experimental Study and Micromechanical Simulations

    Mishin, V. V., Шишов, И. А., Убыйвовк, Е. В., Касаткин, И. А. & Шамшурин, А. И., 1 Aug 2023, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 54, 8, p. 3211-3224 14 p.

    Research output: Contribution to journal › Article › peer-review

  32. (Fe-Ni)-based glassy alloy containing Nb and Cu with excellent soft magnetic properties

    Milkova, D. A., Bazlov, A. I., Zanaeva, E. N., Churyumov, A. Y., Strochko, I. V., Ubyivovk, E. V. & Inoue, A., 1 Jun 2023, In: Journal of Non-Crystalline Solids. 609, 122234.

    Research output: Contribution to journal › Article › peer-review

  33. The influence of the doping elements on the structure and the martensitic transformations in the Ti50-2xHfxZrxNi50-2xCuxCox shape memory alloys

    Resnina, N., Belyaev, S., Bazlov, A., Sibirev, A., Ponikarova, I., Ivanov, A. & Bikbaev, R., 15 Feb 2023, In: Materials Letters. 333, 133670.

    Research output: Contribution to journal › Article › peer-review

  34. Severe plastic deformation influence on the structure transformation of the amorphous Zr62.5Сu22.5Al10Fe5 alloy

    Bazlov, A. I., Parkhomenko, M. S., Ubyivovk, E. V., Zanaeva, E. N., Bazlova, T. A. & Gunderov, D. V., 1 Jan 2023, In: Intermetallics. 152, 107777.

    Research output: Contribution to journal › Article › peer-review

  35. АМОРФНЫЕ СПЛАВЫ СИСТЕМЫ Fe–Co–Cr–B–Si ДЛЯ РАЗРАБОТКИ НАНОСТРУКТУРИРОВАННЫХ МАГНИТОТВЕРДЫХ МАТЕРИАЛОВ

    Занаева, Э. Н., Базлов, А. И., Убыйвовк, Е. В. & Милькова, Д. А., 2023, In: ФИЗИКА МЕТАЛЛОВ И МЕТАЛЛОВЕДЕНИЕ. 124, 6, p. 453-459

    Research output: Contribution to journal › Article › peer-review

  36. ВЛИЯНИЕ ЗАМЕНЫ МОЛИБДЕНА НА ВАНАДИЙ НА СКЛОННОСТЬ К АМОРФИЗАЦИИ, СТРУКТУРУ И ТЕРМИЧЕСКИЕ СВОЙСТВА ВЫСОКОЭНТРОПИЙНЫХ СПЛАВОВ СИСТЕМЫ FE-CO-NI-CR-(MO,V)-B

    Базлов, А. И., Строчко, И. В., Занаева, Э. Н., Убыйвовк, Е. В., Пархоменко, М. С. & Милькова, Д. А., 2023, In: Металлург. 11, p. 86-92

    Research output: Contribution to journal › Article › peer-review

  37. ПОЛУПРОВОДНИКОВЫЕ КВАЗИОДНОМЕРНЫЕ СТРУКТУРЫ: НОВЫЕ МЕТОДЫ СИНТЕЗА И ОБРАБОТКИ

    Убыйвовк, Е. В., 2023, ПОЛУПРОВОДНИКОВЫЕ КВАЗИОДНОМЕРНЫЕ СТРУКТУРЫ: НОВЫЕ МЕТОДЫ СИНТЕЗА И ОБРАБОТКИ. сборник трудов конференции ed. Москва: МИФИ

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  38. СТРУКТУРА И МАРТЕНСИТНЫЕ ПРЕВРАЩЕНИЯ В МНОГОКОМПОНЕНТНЫХ СПЛАВАХ TI-HF-ZR-NI-CU-CO

    Беляев, С. П., Реснина, Н. Н., Поникарова, И. В., Сибирев, А. В., Ребров, Т. В., Стародубова, М. С., Кальницкая, М. В., Березовская, С. В., Иванов, А. М., Бикбаев, Р. М. & Базлов, А. И., 2023, ФИЗИКА КОНДЕНСИРОВАННЫХ СОСТОЯНИЙ. Сборник тезисов III Международной конференции, посвященной 60-летию ИФТТ РАН. Под редакцией Б.Б. Страумала. Черноголовка, 2023. p. 193

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research

  39. Формирование биосовместимых SiC-нанотрубок "сверху-вниз"

    Буравлев, А. Д., Казакин, А. Н., Нащекин, А. В., Убыйвовк, Е. В., Астраханцева, В. А., Осипов, А. В., Святец, Г. В. & Кукушкин, С. А., 2023, In: ФИЗИКА И ТЕХНИКА ПОЛУПРОВОДНИКОВ. 57, 5, p. 343-347

    Research output: Contribution to journal › Article › peer-review

  40. 2022

  41. Finite Element Modeling for Virtual Design to Miniaturize Medical Implants Manufactured of Nanostructured Titanium with Enhanced Mechanical Performance

    Kazarinov, N., Stotskiy, A., Polyakov, A., Valiev, R. Z. & Enikeev, N., Nov 2022, In: Materials. 15, 21, p. 7417 7417.

    Research output: Contribution to journal › Article › peer-review

  42. Interrelation of microstructure and kinetics of martensitic transformations in TiNi alloy in different structural states under thermal cycling conditions

    Чуракова, А. А., Гундеров, Д. В. & Магомедова, Д. К., 14 Sep 2022, In: AIP Conference Proceedings. 2533, 1, 020049.

    Research output: Contribution to journal › Conference article › peer-review

  43. Exact and approximate solutions of the system of interrelated equations of the theory of creep and long-term strength

    Arutyunyan, A. R. & Saitova, R. R., 25 Apr 2022, In: Journal of Physics: Conference Series. 2231, 1, 012001.

    Research output: Contribution to journal › Conference article › peer-review

  44. Strength, thermal resistance and electrical conductivity of aluminum-based composite wire

    Murashkin, M. Y., Sadykov, D. I., Mavlyutov, A. M., Magomedova, D. K. & Kazykhanov, V. U., 25 Apr 2022, In: Journal of Physics: Conference Series. 2231, 1, 012005.

    Research output: Contribution to journal › Article › peer-review

  45. Room-temperature-deformation-induced chemical short-range ordering in a supersaturated ultrafine-grained Al-Zn alloy

    Song, Z. Z., Niu, R. M., Cui, X. Y., Bobruk, E. V., Murashkin, M., Enikeev, N. A., Valiev, R. Z., Ringer, S. P. & Liao, X. Z., 15 Mar 2022, In: Scripta Materialia. 210, 5 p., 114423.

    Research output: Contribution to journal › Article › peer-review

  46. Evolution of the Zr42.5Сu42.5Al10Fe5 amorphous alloy structure during the HPT process

    Bazlov, A. I., Parkhomenko, M. S., Ubyivovk, E. V., Zanaeva, E. N., Gunderov, D. V. & Louzguine-Luzgin, D. V., 15 Jan 2022, In: Journal of Non-Crystalline Solids. 576, 6 p., 121220.

    Research output: Contribution to journal › Article › peer-review

  47. Phase formation and the electrical properties of YSZ/rGO composite ceramics sintered using silicon carbide powder bed

    Glukharev, A., Glumov, O., Smirnov, I., Boltynjuk, E., Kurapova, O. & Konakov, V., 1 Jan 2022, In: Applied Sciences (Switzerland). 12, 1, 16 p., 190.

    Research output: Contribution to journal › Article › peer-review

  48. Investigation of mechanical properties and fracture surface of cylindrical samples Al-6101 under static tension

    Magomedova, D. K., Churakova, A. A. & Gunderov, D. V., 2022, In: Journal of Physics: Conference Series. 2231, 012018.

    Research output: Contribution to journal › Article › peer-review

  49. НАНОКРИСТАЛЛИЗАЦИЯ АМОРФНОГО СПЛАВА ZR62.5СU22.5AL10FE5 В ПРОЦЕССЕ ИПДК

    Базлов, А. И., Пархоменко, М. С., Убыйвовк, Е. В. & Гундеров, Д. В., 2022, АКТУАЛЬНЫЕ ПРОБЛЕМЫ ПРОЧНОСТИ: Материалы международной научной конференции. ИВЦ Минфина, p. 27

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research › peer-review

  50. 2021

  51. Fracture locus characteristics of Al alloy 5083 processed by equal channel angular pressing using miniaturized specimens

    Melzer, D., Smirnov, I., Lukáš, O., Dlouhý, J., Evstifeev, A., Džugan, J. & Valiev, R., 31 Dec 2021, In: Journal of Alloys and Compounds. 889, 12 p., 161675.

    Research output: Contribution to journal › Article › peer-review

  52. Crystallization and its kinetics of soft magnetic (Fe1−xNix)79B12P5Si3C1 glassy alloy ribbons

    Zanaeva, E. N., Milkova, D. A., Bazlov, A. I., Ubyivovk, E. V., Tabachkova, N. Y., Churyumov, A. Y. & Inoue, A., 25 Dec 2021, In: Journal of Alloys and Compounds. 888, 10 p., 161475.

    Research output: Contribution to journal › Article › peer-review

  53. Influence of Deformation Temperature on the Effect of High Plasticity Implementation in Ultrafine-Grained Al–1.5Cu Alloy

    Мавлютов, А. М., Орлова, Т. С., Яппарова, Э. Х., Еникеев, Н. А. & Мурашкин, М. Ю., 22 Dec 2021, In: Physics of the Solid State. 63, 10, p. 1792-1800

    Research output: Contribution to journal › Article › peer-review

  54. Peculiarities of Strengthening of Al–Cu–Zr Alloy Structured by Severe Plastic Deformation

    Orlova, T. S., Sadykov, D. I., Murashkin, M. Y., Kazykhanov, V. U. & Enikeev, N. A., Dec 2021, In: Physics of the Solid State. 63, 12, p. 1744-1756 13 p.

    Research output: Contribution to journal › Article › peer-review

  55. Examination of inverse Hall-Petch relation in nanostructured aluminum alloys by ultra-severe plastic deformation

    Mohammadi, A., Enikeev, N. A., Murashkin, M. Y., Arita, M. & Edalati, K., 20 Nov 2021, In: Journal of Materials Science and Technology. 91, p. 78-89 12 p.

    Research output: Contribution to journal › Article › peer-review

  56. Ultrafine-grained Al-Cu-Zr alloy with high-strength and enhanced plasticity

    Orlova, T. S., Sadykov, D. I., Danilov, D. V., Enikeev, N. A. & Murashkin, M. Y., 15 Nov 2021, In: Materials Letters. 303, 4 p., 130490.

    Research output: Contribution to journal › Article › peer-review

  57. Comparative Analysis of HUVEC and EA.hy926 Functional Characteristics under the Influence of Anti-Endoglin Antibodies

    Stolbovaya, A. Y., Smirnov, I. V., Pinevich, A. A., Vartanyan, N. L., Krutetskaya, I. Y., Terekhina, L. A., Markova, K. L., Malashicheva, A. B. & Samoilovich, M. P., 1 Nov 2021, In: Cell and Tissue Biology. 15, 6, p. 503-517 15 p.

    Research output: Contribution to journal › Article › peer-review

  58. The mechanics and physics of gradient nanomaterials: Dedicated to the memory of Alexander Zhilyaev (1959–2020)

    Raab, G. I., Bobruk, E. V. & Langdon, T. G., 1 Nov 2021, In: Materials Letters. 302, 3 p., 130369.

    Research output: Contribution to journal › Article › peer-review

  59. Influence of deformation at elevated temperatures on stability of microstructure and mechanical properties of UFG aluminum alloy

    Bobruk, E. V., Kazykhanov, V. U. & Yu. Murashkin, M., 15 Oct 2021, In: Materials Letters. 301, 3 p., 130328.

    Research output: Contribution to journal › Article › peer-review

  60. Plasticity of an extra-strong nanocrystalline stainless steel controlled by the “dislocation-segregation” interaction

    Enikeev, N. A., Lomakin, I. V., Abramova, M. M., Mavlyutov, A. M., Lukyanchuk, A. A., Shutov, A. S. & Sauvage, X., 15 Oct 2021, In: Materials Letters. 301, 4 p., 130235.

    Research output: Contribution to journal › Article › peer-review

  61. Ultralow-temperature superplasticity and its novel mechanism in ultrafine-grained Al alloys

    Chinh, N. Q., Murashkin, M. Y., Bobruk, E. V., Lábár, J. L. & Gubicza, J., Sep 2021, (E-pub ahead of print) In: Materials Research Letters. 9, 11, p. 475-482

    Research output: Contribution to journal › Article › peer-review

  62. The dependence of mechanical properties of Al-6101 alloy on geometry of the samples with a groove during tensile tests

    Magomedova, D. K., Gunderov, D. V. & Mavlutov, A. M., 13 Aug 2021, In: Journal of Physics: Conference Series. 1967, 1, 012023.

    Research output: Contribution to journal › Conference article › peer-review

  63. Study of micro indentation assisted deformation on HPT processed Zr62Cu22Al10Fe5Dy1 bulk metallic glass

    Jain, A., Prabhu, Y., Gunderov, D., Ubyivovk, E. V. & Bhatt, J., 1 Aug 2021, In: Journal of Non-Crystalline Solids. 566, 11 p., 120877.

    Research output: Contribution to journal › Article › peer-review

  64. Способы термомеханической обработки проводниковых сплавов системы Al-Mg-Si

    Мурашкин, М. Ю. & Смирнов, И. В., 15 Jun 2021, IPC No. C22F 1/05, Patent No. 2749601, 13 Dec 2019, Priority date 13 Dec 2019, Priority No. до 13.12.2039

    Research output: Patenting and IP registration › Patent

  65. Influence of morphology of intermetallic particles on the microstructure and properties evolution in severely deformed al-fe alloys

    Medvedev, A., Murashkin, M., Enikeev, N., Medvedev, E. & Sauvage, X., 17 May 2021, In: Metals. 11, 5, 14 p., 815.

    Research output: Contribution to journal › Article › peer-review

  66. Vacancy release upon heating of an ultrafine grain Al-Zr alloy: In-situ observations and theoretical modeling

    Lefebvre, W., Skiba, N. V., Chabanais, F., Gutkin, M. Y., Rigutti, L., Murashkin, M. Y. & Orlova, T. S., 5 May 2021, In: Journal of Alloys and Compounds. 862, 10 p., 158455.

    Research output: Contribution to journal › Article › peer-review

  67. The emergence of sequential buckling in reconfigurable hexagonal networks embedded into soft matrix

    Galich, P. I., Sharipova, A. & Slesarenko, S., 18 Apr 2021, In: Materials. 14, 8, 13 p., 2038.

    Research output: Contribution to journal › Article › peer-review

  68. An Analysis of Acoustic Cavitation Thresholds of Water Based on the Incubation Time Criterion Approach

    Smirnov, I. & Mikhailova, N., 1 Apr 2021, In: Fluids. 6, 4, 14 p., 134.

    Research output: Contribution to journal › Article › peer-review

  69. Effects of Mg on strengthening mechanisms in ultrafine-grained Al–Mg–Zr alloy

    Orlova, T. S., Latynina, T. A., Murashkin, M. Y., Chabanais, F., Rigutti, L. & Lefebvre, W., 1 Apr 2021, In: Journal of Alloys and Compounds. 859, 11 p., 157775.

    Research output: Contribution to journal › Article › peer-review

  70. Endoglin Expression and Surface Renewal in Mesenchymal Stem Cells and Endothelial Cells

    Pinevich, A. A., Vartanyan, N. L., Terekhina, L. A., Krutetskaya, I. Y., Shashkova, O. A., Smirnov, I. V. & Samoylovich, M. P., 1 Mar 2021, In: Cell and Tissue Biology. 15, 2, p. 107-119 13 p.

    Research output: Contribution to journal › Article › peer-review

  71. Evaluation of Advanced Aluminum Alloys for Use in New-Generation Wires

    Shakirov, R. G., Sattarov, R. R., Gunderov, D. V. & Murashkin, M. Y., Mar 2021, Power Technology and Engineering, 54, 6, p. 923-928 6 p.

    Research output: Contribution to specialist publication › Article › Education

  72. Unveiling the Local Atomic Arrangements in the Shear Band Regions of Metallic Glass

    Mu, X., Chellali, M. R., Boltynjuk, E., Gunderov, D., Valiev, R. Z., Hahn, H., Kübel, C., Ivanisenko, Y. & Velasco, L., Mar 2021, In: Advanced Materials. 33, 12, p. 1-10 10 p., 2007267.

    Research output: Contribution to journal › Article › peer-review

  73. Распределение напряжений при статическом растяжении цилиндрических образцов из мелко- и крупнозернистого алюминиевого сплава 6101

    Магомедова, Д. К. & Чуракова, А. А., Mar 2021, In: Наноиндустрия. 1

    Research output: Contribution to journal › Article › peer-review

  74. Effect of severe plastic deformation on structure refinement and mechanical properties of the Al-Zn-Mg-Fe-Ni alloy

    Brodova, I., Rasposienko, D., Shirinkina, I., Petrova, A., Akopyan, T. & Bobruk, E., 9 Feb 2021, In: Metals. 11, 2, 16 p., 296.

    Research output: Contribution to journal › Article › peer-review

  75. The effect of neutron irradiation on the impact toughness of austenitic stainless steel in ultrafine-grained state

    Shamardin, V. K., Bulanova, T. M., Fedoseev, A. E., Karsakov, A. A., Valiev, R. Z., Abramova, M. M., Smirnov, I. V. & Enikeev, N. A., 1 Feb 2021, In: Journal of Nuclear Materials. 544, 5 p., 152680.

    Research output: Contribution to journal › Article › peer-review

  76. Structure and Properties of Ca and Zr Containing Heat Resistant Wire Aluminum Alloy Manufactured by Electromagnetic Casting

    Белов, Н., Торгом, А., Короткова, Н., Мурашкин, М. Ю., Тимофеев, В. & Фортуна, А., Feb 2021, In: Metals. 11, 2, 15 p., 236.

    Research output: Contribution to journal › Article › peer-review

  77. Effect of multiple forging and annealing on microstructure and mechanical properties of a high-manganese steel

    Dolzhenko, P. D., Valiev, R. Z., Belyakov, A. N., Bobruk, E. V. & Tikhonova, M. S., 30 Jan 2021, In: IOP Conference Series: Materials Science and Engineering. 1014, 1, 012008.

    Research output: Contribution to journal › Conference article › peer-review

  78. A new combined SPD technique to improve mechanical properties & electrical conductivity of long-sized billets

    Bobruk, E. V., Botkin, A. V., Murashkin, M. Y. & Raab, G. I., 29 Jan 2021, (E-pub ahead of print) In: IOP Conference Series: Materials Science and Engineering. 1014, 4 p., 012004.

    Research output: Contribution to journal › Article › peer-review

  79. A new combined SPD technique to improve mechanical properties and electrical conductivity of long-sized billets

    Bobruk, E. V., Botkin, A. V., Murashkin, M. Y. & Raab, G. I., 29 Jan 2021, In: IOP Conference Series: Materials Science and Engineering. 1014, 1, 012004.

    Research output: Contribution to journal › Conference article › peer-review

  80. Suppression of the annealing-induced hardening effect in ultrafine-grained Al at low temperatures

    Orlova, T. S., Mavlyutov, A. M. & Gutkin, M. Y., 20 Jan 2021, In: Materials Science and Engineering A. 802, 140588.

    Research output: Contribution to journal › Article › peer-review

  81. Developing age-hardenable Al-Zr alloy by ultra-severe plastic deformation: Significance of supersaturation, segregation and precipitation on hardening and electrical conductivity

    Mohammadi, A., Enikeev, N. A., Murashkin, M. Y., Arita, M. & Edalati, K., 15 Jan 2021, In: Acta Materialia. 203, 16 p., 116503.

    Research output: Contribution to journal › Article › peer-review

  82. Calculation of hardening contributions of the TiNi alloy undergoing martensitic transformations in a free state

    Churakova, A. A., Gunderov, D. V., Tolstov, N. E. & Magomedova, D. K., 2021, In: IOP Conference Series: Materials Science and Engineering. 1008, 012038.

    Research output: Contribution to journal › Conference article

  83. Исследование механических свойств и поверхности разрушения цилиндрических образцов Аl-6101 при статическом растяжении

    Магомедова, Д. К., Чуракова, А. А. & Гундеров, Д. В., 2021, Актуальные проблемы механики сплошной среды: Материалы VII международной конференции 04-08 октября 2021, Цахкадзор, Армения. Ереван: Институт механики НАН РА, p. 167-171

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  84. ЭВОЛЮЦИЯ СТРУКТУРЫ АМОРФНОГО СПЛАВА ZR42.5СU42.5AL10FE5 В ПРОЦЕССЕ ИПДК

    Базлов, А. И., Пархоменко, М. С., Убыйвовк, Е. В. & Гундеров, Д. В., 2021, p. 150-152. 3 p.

    Research output: Contribution to conference › Paper › peer-review

  85. 2020

  86. Stabilisation effect of strain hysteresis loop for steel 45

    Selyutina, N. S., Smirnov, I. V. & Petrov, Y. V., 31 Dec 2020, (E-pub ahead of print) In: International Journal of Fatigue. 106133.

    Research output: Contribution to journal › Article › peer-review

  87. Evolution of microstructure and hardness during artificial aging of an ultrafine-grained Al-Zn-Mg-Zr alloy processed by high pressure torsion

    Gubicza, J., El-Tahawy, M., Lábár, J. L., Bobruk, E. V., Murashkin, M. Y., Valiev, R. Z. & Chinh, N. Q., 1 Dec 2020, In: Journal of Materials Science. 55, 35, p. 16791-16805 15 p.

    Research output: Contribution to journal › Article › peer-review

  88. Microstructural changes and strengthening of austenitic stainless steels during rolling at 473 k

    Odnobokova, M., Belyakov, A., Enikeev, N., Kaibyshev, R. & Valiev, R. Z., Dec 2020, In: Metals. 10, 12, p. 1-18 18 p., 1614.

    Research output: Contribution to journal › Article › peer-review

  89. Dynamic Strength Analysis of Bitumen Binders for Asphalt Concrete Mixtures in Terms of the Fracture Incubation Time Criterion

    Smirnov, I. V. & Петров, Ю. В., Nov 2020, In: Physical Mesomechanics. 23, 6, p. 538-546 9 p.

    Research output: Contribution to journal › Article › peer-review

  90. Influence of high-pressure torsion and accumulative high-pressure torsion on microstructure and properties of zr-based bulk metallic glass vit105

    Gunderov, D., Astanin, V., Churakova, A., Sitdikov, V., Ubyivovk, E., Islamov, A. & Wang, J. T., Nov 2020, In: Metals. 10, 11, p. 1-14 14 p., 1433.

    Research output: Contribution to journal › Article › peer-review

  91. Strain Rate Dependences of the Critical Stresses in Aluminum Al–Mg Alloys upon Impact Loads

    Evstifeev, A. D., Smirnov, I. V. & Petrov, Y. V., Nov 2020, In: Physics of the Solid State. 62, 11, p. 1967-1972 6 p.

    Research output: Contribution to journal › Article › peer-review

  92. The role of grain boundaries and their triple junctions in strengthening and softening of nanocrystalline ceramics

    Sheinerman, A. G. & Gutkin, M. Y., Nov 2020, In: Letters on Materials. 10, 4, p. 547-550 4 p.

    Research output: Contribution to journal › Article › peer-review

  93. Effect of Dynamic Strength of a Material on Its Erosion Resistance

    Evstifeev, A. D., Smirnov, I. V. & Петров, Ю. В., 1 Oct 2020, In: Physics of the Solid State. 62, 10, p. 1737-1740 4 p.

    Research output: Contribution to journal › Article › peer-review

  94. Influence of strain rate and Sn in solid solution on the grain refinement and crystalline defect density in severely deformed Cu

    Zaher, G., Lomakin, I., Enikeev, N., Jouen, S., Saiter-Fourcin, A. & Sauvage, X., Oct 2020, In: Materials Today Communications. 101746.

    Research output: Contribution to journal › Article › peer-review

  95. Nanostructured Fe–Cr–W Steel Exhibits Enhanced Resistance to Self-Ion Irradiation

    Mazilkin, A., Ivanisenko, Y., Sauvage, X., Etienne, A., Radiguet, B., Valiev, R., Abramova, M. & Enikeev, N., Oct 2020, In: Advanced Engineering Materials. 22, 10, 5 p., 1901333.

    Research output: Contribution to journal › Article › peer-review

  96. Оценка перспективных разработок алюминиевых сплавов для применения в проводах нового поколения

    Шакиров, Р. Г., Саттаров, Р. Р., Гундеров, Д. В. & Мурашкин, М. Ю., Oct 2020, In: Электрические станции . 20, p. 49-55 8 p.

    Research output: Contribution to journal › Article › peer-review

  97. Устройство для лазерно-акустического контроля твердых и жидких сред

    Судьенков, Ю. В. & Смирнов, И. В., 17 Sep 2020, IPC No. G01N 29/07 (2006.01), G01H 9/00 (2006.01), Patent No. 2732470, 7 Dec 2018, Priority date 7 Dec 2018

    Research output: Patenting and IP registration › Patent

  98. Protecting the skin-implant interface with transcutaneous silver-coated skin-and-bone-integrated pylon in pig and rabbit dorsum models

    Shevtsov, M., Gavrilov, D., Yudintceva, N., Zemtsova, E., Arbenin, A., Smirnov, V., Voronkina, I., Adamova, P., Blinova, M., Mikhailova, N., Galibin, O., Akkaoui, M. & Pitkin, M., 16 Sep 2020, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 109, 4, p. 584-595 12 p.

    Research output: Contribution to journal › Article › peer-review

  99. Fabrication of nickel-graphene composites with superior hardness

    Kurapova, O. Y., Lomakin, I. V., Sergeev, S. N., Solovyeva, E. N., Zhilyaev, A. P., Archakov, I. Y. & Konakov, V. G., 15 Sep 2020, In: Journal of Alloys and Compounds. 835, 7 p., 155463.

    Research output: Contribution to journal › Article › peer-review

  100. The Effect of Annealing and Additional Deformation on the Mechanical Properties of Ultrafine-Grained Al–1.5Cu Alloy

    Mavlyutov, A. M., Orlova, T. S. & Yapparova, E. K., 1 Sep 2020, In: Technical Physics Letters. 46, 9, p. 916-920 5 p.

    Research output: Contribution to journal › Article › peer-review

  101. Regulation of the size of metal iron nanoparticles in channels of mesoporous silica matrices (MCM-41, SBA-15) and structure and magnetic properties of the received nanocomposites МСМ-41/Fe0 and SBA-15/Fe0

    Zemtsova, E. G., Arbenin, A. Y., Galiullina, L. F., Ponomareva, A. N., Sokolova, D. N. & Smirnov, V. M., 20 Aug 2020, In: Journal of Nanoparticle Research. 22, 9, 17 p., 255.

    Research output: Contribution to journal › Article › peer-review

  102. Effect of manganese addition on thermal and electrical properties of Zr45Cu45Al10 metallic glass

    Bazlov, A. I., Parhomenko, M. S., Mamzurina, O. I., Karpenkov, D. Y., Serhiienko, I., Prosviryakov, A. S., Zanaeva, E. N. & Louzguine-Luzgin, D. V., 15 Aug 2020, In: Journal of Non-Crystalline Solids. 542, 120103.

    Research output: Contribution to journal › Article › peer-review

  103. The phase composition and mechanical properties of the novel precipitation-strengthening Al-Cu-Er-Mn-Zr alloy

    Amer, S., Yakovtseva, O., Loginova, I., Medvedeva, S., Prosviryakov, A., Bazlov, A., Barkov, R. & Pozdniakov, A., Aug 2020, In: Applied Sciences (Switzerland). 10, 15, 5345.

    Research output: Contribution to journal › Article › peer-review

  104. Кристаллография и дефекты кристаллического строения: курс лекций : учебное пособие

    Бобрук, Е. В., 15 Jul 2020, Уфа: Уфимский государственный авиационный технический университет. 259 p.

    Research output: Book/Report/Anthology › Teaching manual › peer-review

  105. Numerical simulations of impact Taylor tests

    Volkov, G. A., Bratov, V. A., Borodin, E. N., Evstifeev, A. D. & Mikhailova, N. V., 6 Jul 2020, In: Journal of Physics: Conference Series. 1556, 1, 6 p., 012059.

    Research output: Contribution to journal › Conference article › peer-review

  106. Temporal Characteristics of Failure in High-Speed Tests

    Smirnov, I. V. & Петров, Ю. В., Jul 2020, In: Doklady Physics. 65, 7, p. 255-257 3 p.

    Research output: Contribution to journal › Article › peer-review

  107. Annealing behavior in a high-pressure torsion-processed Fe–9Cr steel

    Duan, J., Wen, H., Zhou, C., He, X., Islamgaliev, R. & Valiev, R., 1 Jun 2020, In: Journal of Materials Science. 55, 18, p. 7958-7968 11 p.

    Research output: Contribution to journal › Article › peer-review

  108. Mechanical Properties of Ultrafine-Grained Aluminum in the Temperature Range 4.2–300 K

    Orlova, T. S., Shpeizman, V. V., Mavlyutov, A. M., Latynina, T. A., Averkin, A. I. & Timashov, R. B., 1 Jun 2020, In: Physics of the Solid State. 62, 6, p. 1048-1055 8 p.

    Research output: Contribution to journal › Article › peer-review

  109. Structure and Properties of Al–0.6 wt.%Zr Wire Alloy Manufactured by Direct Drawing of Electromagnetically Cast Wire Rod

    Мурашкин, М. Ю., Jun 2020, In: Metals. 10, 6, 11 p., 769.

    Research output: Contribution to journal › Article › peer-review

  110. Strain rate dependencies and competitive effects of dynamic strength of some engineering materials

    Smirnov, I. & Konstantinov, A., 1 May 2020, In: Applied Sciences (Switzerland). 10, 9, 16 p., 3293.

    Research output: Contribution to journal › Article › peer-review

  111. The effect of reduced graphene oxide (RGO) and thermally exfoliated graphite (TEFG) on the mechanical properties of “nickel-graphene” composites

    Kurapova, O. Y., Smirnov, I. V., Solovyeva, E. N., Archakov, I. Y. & Konakov, V. G., May 2020, In: Letters on Materials. 10, 2, p. 164-169 6 p.

    Research output: Contribution to journal › Article › peer-review

  112. Deformation-induced atomic rearrangements and crystallization in the shear bands of a Tb75Fe25 nanoglass

    Singh, S. P., Chellali, M. R., Velasco, L., Ivanisenko, Y., Boltynjuk, E., Gleiter, H. & Hahn, H., 25 Apr 2020, In: Journal of Alloys and Compounds. 821, 8 p., 153486.

    Research output: Contribution to journal › Article › peer-review

  113. Critical stresses determination in case of pore formation for coarse- and ultrafine-grained Al-6101 under static tension

    Magomedova, D. K., Efimov, M. A., Churakova, A. A., Ryabokon, D. V. & Gunderov, D. V., 3 Apr 2020, In: Journal of Physics: Conference Series. 1474, 1, 012027.

    Research output: Contribution to journal › Conference article › peer-review

  114. Three-component working electrode micron-sized Ag particles/tiO2 layer/Ti: Template electrochemical synthesis and potential use as electrochemical sensor for glutathione detection

    Arbenin, A. Y., Zemtsova, E. G., Ermakov, S. S., Gaskov, A. M., Baburova, P. I., Sokolova, D. N., Yaroshenko, S. V. & Smirnov, V. M., Mar 2020, In: Materials Research Express. 7, 3, 6 p., 035401.

    Research output: Contribution to journal › Article › peer-review

  115. Effect of revolutions number on mechanical properties of HPT processed copper

    Melzer, D., Smirnov, I., Evstifeev, A., Rzepa, S. & Konopík, P., 25 Feb 2020, In: IOP Conference Series: Materials Science and Engineering. 723, 1, 012019.

    Research output: Contribution to journal › Conference article › peer-review

  116. Accumulative HPT of Zr-based bulk metallic glasses

    Gunderov, D. V., Churakova, A. A., Astanin, V. V., Asfandiyarov, R. N., Hahn, H. & Valiev, R. Z., 15 Feb 2020, In: Materials Letters. 261, 3 p., 127000.

    Research output: Contribution to journal › Article › peer-review

  117. A unified experimental-theoretical approach to predict the critical stress characteristics of failure and yielding under quasi-static and dynamic loading

    Smirnov, I. V., Lamzin, D. A., Konstantinov, A. Y., Bragov, A. M. & Lomunov, A. K., 15 Feb 2020, In: Engineering Fracture Mechanics. 225, 11 p., 106197.

    Research output: Contribution to journal › Article › peer-review

  118. Developing nanostructured Ti alloys for innovative implantable medical devices

    Valiev, R. Z., Prokofiev, E. A., Kazarinov, N. A., Raab, G. I., Minasov, T. B. & Stráský, J., 2 Feb 2020, In: Materials. 13, 4, 16 p., 967.

    Research output: Contribution to journal › Review article › peer-review

  119. A model for direct and inverse Hall-Petch relation for nanocrystalline ceramics

    Sheinerman, A. G., Castro, R. H. R. & Gutkin, M. Y., 1 Feb 2020, In: Materials Letters. 260, 3 p., 126886.

    Research output: Contribution to journal › Article › peer-review

  120. Characterizing Microstructural and Mechanical Properties of Al–Zn Alloys Processed by High-Pressure Torsion

    Chinh, N. Q., Szommer, P., Gubicza, J., El-Tahawy, M., Bobruk, E. V., Murashkin, M. Y. & Valiev, R. Z., 1 Jan 2020, In: Advanced Engineering Materials. 22, 1, 11 p., 1900672.

    Research output: Contribution to journal › Review article › peer-review

  121. Grain Size Effects on Static and Dynamic Strength of Ultrafine-Grained Al-Mg-Mn Alloy Produced by High-Pressure Torsion

    Bobruk, E. V., Brodova, I. G. & Razorenov, S. V., 1 Jan 2020, In: Journal of Materials Engineering and Performance. 29, 1, p. 464-469 6 p.

    Research output: Contribution to journal › Article › peer-review

  122. Model of Enhanced Strength and Ductility of Metal/Graphene Composites with Bimodal Grain Size Distribution

    Sheinerman, A. G. & Gutkin, M. Y., 1 Jan 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 1, p. 189-199 11 p.

    Research output: Contribution to journal › Article › peer-review

  123. The Influence of Monoclonal Antibodies to Human Endoglin on the Functional Characteristics of EA.hy926 Endothelial Cells

    Stolbovaya, A. Y., Smirnov, I. V., Pinevich, A. A., Berlina, M. A., Kozyreva, A. R., Shashkova, O. A., Sokolov, D. I., Selkov, S. A. & Samoilovich, M. P., 1 Jan 2020, In: Cell and Tissue Biology. 14, 1

    Research output: Contribution to journal › Article › peer-review

  124. Yield Strength of Metal–Graphene Composites with a Homogeneous and Bimodal Grain Structure

    Бобылев, С. В., Гуткин, М. Ю. & Шейнерман, А. Г., 1 Jan 2020, In: Mechanics of Solids. 55, 1, p. 22-31 10 p.

    Research output: Contribution to journal › Article › peer-review

  125. Characterizing Microstructural and Mechanical Properties of Al-Zn Alloys processed by High-Pressure Torsion

    Chinh, N. Q., Szommer, P., Gubicza, J., El-Tahawy, M., Bobruk, E. V., Мурашкин, М. Ю. & Valiev, R. Z., 2020, In: Advanced Engineering Materials. 22, 1, 11 p., 1900672 .

    Research output: Contribution to journal › Review article › peer-review

  126. EFFECT OF THE SPECIMEN SIZE ON NECKING DEVELOPMENT IN METALS AND ALLOYS DURING SUPERPLASTIC DEFORMATION

    Sheinerman, A. G., 2020, In: Materials Physics and Mechanics. 46, 1, p. 1-6 6 p.

    Research output: Contribution to journal › Article › peer-review

  127. Evaluation of critical stresses for quasi-brittle materials at various loading rates

    Smirnov, I. & Konstantinov, A., 2020, In: Materials Physics and Mechanics. 44, 2, p. 210-220 11 p.

    Research output: Contribution to journal › Article › peer-review

  128. Новые исследования парадокса прочности и пластичности в наноматериалах

    Валиев, Р. З., 2020, (Accepted/In press) In: ВЕСТНИК САНКТ-ПЕТЕРБУРГСКОГО УНИВЕРСИТЕТА. МАТЕМАТИКА. МЕХАНИКА. АСТРОНОМИЯ. 7(65), 1, p. 112-127

    Research output: Contribution to journal › Article › peer-review

  129. РАСЧЕТ ЗАВИСИМОСТИ ЗВУКОКАПИЛЛЯРНОГО ЭФФЕКТА ОТ ЧАСТОТЫ УЛЬТРАЗВУКА НА ОСНОВЕ КРИТЕРИЯ ПОРОГОВОЙ КАВИТАЦИИ.

    Михайлова, Н. В., 2020, In: ПРОБЛЕМЫ ПРОЧНОСТИ И ПЛАСТИЧНОСТИ. 82, 1, p. 64-74

    Research output: Contribution to journal › Article

  130. 2019

  131. SEM and AFM analysis of the shear bands in Zr-based BMG after HPT

    Astanin, V. V., Gunderov, D., Boltynjuk, E., Ubyivovk, E., Churakova, A. & Gunderova, S., Dec 2019, In: IOP Conference Series: Materials Science and Engineering. 672, 12019.

    Research output: Contribution to journal › Article › peer-review

  132. Strength enhancement induced by grain boundary solute segregations in ultrafine-grained alloys

    Bobylev, S. V., Enikeev, N. A., Sheinerman, A. G. & Valiev, R. Z., Dec 2019, In: International Journal of Plasticity. 123, p. 133-144 12 p.

    Research output: Contribution to journal › Article › peer-review

  133. Strengthening and Softening of Nanoceramics: a Brief Review

    Sheinerman, A. G. & Gutkin, M. Y., Dec 2019, In: Reviews on Advanced Materials and Technologies. 1, 1, p. 46-53

    Research output: Contribution to journal › Article › peer-review

  134. ИССЛЕДОВАНИЕ МЕХАНИЧЕСКИХ СВОЙСТВ КРУПНО- И МЕЛКОЗЕРНИСТОГО AL-6101 ПРИ СТАТИЧЕСКОМ РАСТЯЖЕНИИ

    Магомедова, Д. К., Ефимов, М. А. & Рябоконь, Д. В., Dec 2019, Структура и свойства высокоэнтропийных сплавов и покрытий: Техническая программа и тезисы школы молодых ученых. Белгород: ООО "Эпицентр", p. 43-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  135. Mechanical behavior of coarse- and fine-grained Al-6101 samples of different geometry under tension

    Magomedova, D. K., Gunderov, D. V. & Efimov, M. A., 25 Nov 2019, In: IOP Conference Series: Materials Science and Engineering. 672, 1, 012037.

    Research output: Contribution to journal › Article › peer-review

  136. Progress in NanoSPD research through scientometric analysis

    Safargalina, Z. & Alexandrov, I. V., 25 Nov 2019, In: IOP Conference Series: Materials Science and Engineering. 672, 1, 012003.

    Research output: Contribution to journal › Article › peer-review

  137. Study of the dynamic strength of the ultrafine-grained titanium VT 1-0

    Evstifeev, A. D. & Valiev, R. R., 25 Nov 2019, In: IOP Conference Series: Materials Science and Engineering. 672, 1, 012063.

    Research output: Contribution to journal › Conference article › peer-review

  138. The effect of ultrafine-grained states on superplastic behavior of Al-Mg-Si alloy

    Bobruk, E. V., Safargalina, Z. A., Golubev, O. V., Baikov, D. & Kazykhanov, V. U., 15 Nov 2019, In: Materials Letters. 255, 4 p., 126503.

    Research output: Contribution to journal › Article › peer-review

  139. Ultrasonically assisted drilling in marble

    Mikhailova, N., Onawumi, P. Y., Volkov, G., Smirnov, I., Broseghini, M., Roy, A., Petrov, Y. & Silberschmidt, V. V., 10 Nov 2019, In: Journal of Sound and Vibration. 460, 16 p., 114880.

    Research output: Contribution to journal › Article › peer-review

  140. Influence of fine scale features on room temperature superplastic behaviour of an ultrafine-grained Al-30Zn alloy

    Bobruk, E. V., Sauvage, X., Еникеев, Н. А. & Valiev, R. Z., 1 Nov 2019, In: Materials Letters. 254, p. 329-331 3 p.

    Research output: Contribution to journal › Article › peer-review

  141. Destruction of ABS Polymer in the Glass State under Dynamic Stressing

    Atroshenko, S. A., Chevrychkina, A. A., Evstifeev, A. D. & Volkov, G. A., Nov 2019, In: Physics of the Solid State. 61, 11, p. 2075-2082 8 p.

    Research output: Contribution to journal › Article › peer-review

  142. Structure and electrical properties of YSZ-rGO composites and YSZ ceramics, obtained from composite powder

    Kurapova, O. Y., Glukharev, A. G., Glumov, O. V., Kurapov, M. Y., Boltynjuk, E. V. & Konakov, V. G., 10 Oct 2019, In: Electrochimica Acta. 320, 12 p., 134573.

    Research output: Contribution to journal › Article › peer-review

  143. Effect of grain boundary sliding on fracture toughness of ceramic/graphene composites

    Sheinerman, A. G., Morozov, N. F. & Gutkin, M. Y., 1 Oct 2019, In: Mechanics of Materials. 137, 7 p., 103126.

    Research output: Contribution to journal › Article › peer-review

  144. Nanocrystalline Ti49.2Ni50.8 shape memory alloy as orthopaedic implant material with better performance

    Li, H. F., Nie, F. L., Zheng, Y. F., Cheng, Y., Wei, S. C. & Valiev, R. Z., Oct 2019, In: Journal of Materials Science and Technology. 35, 10, p. 2156-2162 7 p.

    Research output: Contribution to journal › Article › peer-review

  145. Synthesis, structure and mechanical properties of bulk “copper-graphene” composites

    Konakov, V. G., Kurapova, O. Y., Solovyeva, E. N., Lomakin, I. V. & Archakov, I. Y., 12 Sep 2019, In: Reviews on Advanced Materials Science. 57, 2, p. 151-157

    Research output: Contribution to journal › Article › peer-review

  146. Observation of shear bands in the Vitreloy metallic glass subjected to HPT processing

    Gunderov, D. V., Churakova, A. A., Boltynjuk, E. V., Ubyivovk, E. V., Astanin, V. V., Asfandiyarov, R. N., Valiev, R. Z., Xioang, W. & Wang, J. T., 5 Sep 2019, In: Journal of Alloys and Compounds. 800, p. 58-63 6 p.

    Research output: Contribution to journal › Article › peer-review

  147. Aging Effect on the One-Way and Two-Way Shape Memory in TiNi-Based Alloys

    Beliaev, F. S., Evard, M. E., Ostropiko, E. S., Razov, A. I. & Volkov, A. E., 1 Sep 2019, In: Shape Memory and Superelasticity. 5, 3, p. 218-229 12 p.

    Research output: Contribution to journal › Article › peer-review

  148. Superplasticity and High Strength in Al–Zn–Mg–Zr Alloy with Ultrafine Grains

    Valiev, R. Z., Kazykhanov, V. U., Mavlyutov, A. M., Yudakhina, A. A., Chinh, N. Q. & Murashkin, M. Y., 21 Aug 2019, In: Advanced Engineering Materials. 7 p., 1900555.

    Research output: Contribution to journal › Article › peer-review

  149. Effect of the eutectic Al-(Ce,La) phase morphology on microstructure, mechanical properties, electrical conductivity and heat resistance of Al-4.5(Ce,La) alloy after SPD and subsequent annealing

    Medvedev, A. E., Murashkin, M. Y., Enikeev, N. A., Bikmukhametov, I., Valiev, R. Z., Hodgson, P. D. & Lapovok, R., 5 Aug 2019, In: Journal of Alloys and Compounds. 796, p. 321-330 10 p.

    Research output: Contribution to journal › Article › peer-review

  150. Effect of Ultrafine-Grained Structure of a Material on the Strength Characteristics of an Aluminum Alloy upon Impact Loads

    Evstifeev, A. D., Smirnov, I. V. & Petrov, Y. V., 1 Jun 2019, In: Physics of the Solid State. 61, 6, p. 1062-1066 5 p.

    Research output: Contribution to journal › Article › peer-review

  151. Experimental observation and numerical modelling of unstable behaviour of a fast crack velocity

    Smirnov, I., Kazarinov, N. & Petrov, Y., 1 Jun 2019, In: Theoretical and Applied Fracture Mechanics. 101, p. 53-58 6 p.

    Research output: Contribution to journal › Article › peer-review

  152. Исследования процесса инкапсуляции/декапсуляции доксорубицина в порах композитной частицы МСМ-41@Fe3O4 для адресной доставки лекарственного препарата.

    Земцова, Е. Г., Арбенин, А. Ю., Галиуллина, Л. Ф. & Смирнов, В. М., Jun 2019.

    Research output: Contribution to conference › Abstract › peer-review

  153. Effect of annealing on microstructure, strength and electrical conductivity of the pre-aged and HPT-processed Al-0.4Zr alloy

    Orlova, T. S., Latynina, T. A., Mavlyutov, A. M., Murashkin, M. Y. & Valiev, R. Z., 5 May 2019, In: Journal of Alloys and Compounds. 784, p. 41-48 8 p.

    Research output: Contribution to journal › Article › peer-review

  154. Strength Performance of 1230 Aluminum Alloy under Tension in the Quasi-Static and Dynamic Ranges of Loading Parameters

    Evstifeev, A. D., Volkov, G. A., Chevrychkina, A. A. & Petrov, Y. V., 1 May 2019, In: Technical Physics. 64, 5, p. 620-624 5 p.

    Research output: Contribution to journal › Article › peer-review

  155. Термическая и химико-термическая обработка материалов: Учебное пособие

    Бобрук, Е. В. & Попов, В. И., 30 Apr 2019, Уфа: Уфимский государственный авиационный технический университет. 130 p.

    Research output: Book/Report/Anthology › Teaching manual › peer-review

  156. Получение, микроструктура и механические свойства объемных наноструктурных металлических материалов: Учебное пособие

    Бобрук, Е. В., 25 Apr 2019, 62 p. Белгород : Издательский дом "Белгород".

    Research output: Other contribution › Education

  157. Strengthening mechanisms in an ultrafine-grained Al-Zn-Mg-Cu alloy processed by high pressure torsion at different temperatures

    Zhang, Y., Jin, S., Trimby, P., Liao, X., Murashkin, M. Y., Valiev, R. Z. & Sha, G., 3 Apr 2019, In: Materials Science and Engineering A. 752, p. 223-232 10 p.

    Research output: Contribution to journal › Article › peer-review

  158. Dynamic Strength Characteristics of Materials: Influence of the Specimen Size on Strain Rate

    Evstifeev, A. D., Volkov, G. A., Chevrychkina, A. A. & Petrov, Y. V., 1 Apr 2019, In: Technical Physics. 64, 4, p. 523-526 4 p.

    Research output: Contribution to journal › Article › peer-review

  159. Strength Characteristics and Fracture of Ultrafine-Grained Titanium Grade 4 Processed by Equal Channel Angular Pressing-Conform

    Smirnov, I., Apr 2019, In: Technical Physics. 64, 4, p. 497-505 9 p.

    Research output: Contribution to journal › Article › peer-review

  160. Microstructure, mechanical properties and aging behaviour of nanocrystalline copper–beryllium alloy

    Lomakin, I., Castillo-Rodríguez, M. & Sauvage, X., 28 Jan 2019, In: Materials Science and Engineering A. 744, p. 206-214 9 p.

    Research output: Contribution to journal › Article › peer-review

  161. Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion

    Liu, Y., Liu, M., Chen, X., Cao, Y., Roven, H. J., Murashkin, M., Valiev, R. Z. & Zhou, H., 15 Jan 2019, In: Scripta Materialia. 159, p. 137-141

    Research output: Contribution to journal › Article › peer-review

  162. Radiation tolerance of ultrafine-grained materials fabricated by severe plastic deformation

    Enikeev, N. A., Shamardin, V. K. & Radiguet, B., 1 Jan 2019, In: Materials Transactions. 60, 9, p. 1723-1731 9 p.

    Research output: Contribution to journal › Article › peer-review

  163. Superplastic Behavior at Lower Temperatures of High-Strength Ultrafine-Grained Al Alloy 7475

    Bobruk, E. V., Murashkin, M. Y., Kazykhanov, V. U. & Valiev, R. Z., 1 Jan 2019, In: Advanced Engineering Materials. 21, 1, 5 p., 1800094.

    Research output: Contribution to journal › Article › peer-review

  164. The Impact of Severe Plastic Deformation on the Microstructure and Physicomechanical Properties of Al–0.4Zr

    Mavlyutov, A. M., Latynina, T. A., Murashkin, M. Y., Valiev, R. Z. & Orlova, T. S., 1 Jan 2019, In: Inorganic Materials: Applied Research. 10, 1, p. 5-11 7 p.

    Research output: Contribution to journal › Article › peer-review

  165. Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion

    Zhang, Y., Jin, S., Trimby, P. W., Liao, X., Murashkin, M. Y., Valiev, R. Z., Liu, J., Cairney, J. M., Ringer, S. P. & Sha, G., Jan 2019, In: Acta Materialia. 162, p. 19-32

    Research output: Contribution to journal › Article › peer-review

  166. Annealing behavior of severely-deformed titanium Grade 4

    Dyakonov, G. S., Mironov, S., Enikeev, N., Valiev, R. Z. & Semiatin, S. L., 2019, In: Materials Science and Engineering A. 742, p. 89-101

    Research output: Contribution to journal › Article › peer-review

  167. Biological response of chemically treated surface of the ultrafine-grained Ti-6Al-7Nb alloy for biomedical applications

    de Oliveira, D. P., Toniato, T. V., Ricci, R., Marciano, F. R., Prokofiev, E., Valiev, R. Z., Lobo, A. O. & Jorge Júnior, A. M., 2019, In: International Journal of Nanomedicine. 14, p. 1725-1736

    Research output: Contribution to journal › Article › peer-review

  168. Consolidation of the Amorphous Zr50Cu50 Ribbons by High-Pressure Torsion

    Gunderov, D., Boltynjuk, E., Ubyivovk, E., Churakova, A., Kilmametov, A. & Valiev, R., 2019, In: Advanced Engineering Materials. 5 p., 1900694.

    Research output: Contribution to journal › Article › peer-review

  169. Critical stresses determination in case of pores formation for coarse and ultra-fine grained Al-6101 under static tension

    Efimov, V. A., Magomedova, D. K., Gunderov, D. V. & Ryabokon, D. V., 2019, TOPICAL PROBLEMS OF CONTINUUM MECHANICS: Proceedings of VI International Conference. Yerevan: Институт механики НАН РА, p. 386-389

    Research output: Chapter in Book/Report/Conference proceeding › Article in an anthology › Research › peer-review

  170. EBSD analysis of grain-refinement mechanisms operating during equal-channel angular pressing of commercial-purity titanium.

    Dyakonov, G. S., Semenova, I. P., Valiev, R. Z., Mironov, S. & Semiatin, S. L., 2019, In: Acta Materialia. 173, p. 174-183

    Research output: Contribution to journal › Article

  171. Effect of high-pressure torsion on the mechanical behavior of a Zr-based BMG

    Gunderov, D., Boltynjuk, E., Churakova, A., Batirshin, E., Mullayanov, A., Titov, V. & Ivanisenko, Y., 2019, In: IOP Conference Series: Materials Science and Engineering. 672

    Research output: Contribution to journal › Article › peer-review

  172. Effect of Severe Plastic Deformation on the Structure and Properties of the Aluminum Alloy System Al-Cu-Mg

    Paitova, O., Bobruk, E., Shasherina, S. & Bufan, Z., 2019, In: Key Engineering Materials. 822, p. 94-100

    Research output: Contribution to journal › Article › peer-review

  173. Improving the Properties of Aluminum Alloy System Al-Cu-Mg, Subjected to Hardening and Severe Plastic Deformation

    Paitova, O., Bobruk, E. V., Skotnikova, M. & Wu, J., 2019, In: Key Engineering Materials. 822, p. 101-108 8 p.

    Research output: Contribution to journal › Article › peer-review

  174. Influence of alloying elements on the thermal stability of ultra-fine-grained Ni alloys

    Zhang, N., Gunderov, D., Yang, T. T., Cai, X. C. & Shen, T. D., 2019, In: Journal of Materials Science. 54 , 14, p. 10506-10515

    Research output: Contribution to journal › Article › peer-review

  175. Investigation of the Destruction of ABS Plastic after Dynamic Loading at Various Temperatures

    Атрошенко, С. А., Чеврычкина, А. А. & Евстифеев, А. Д., 2019, p. 261-268.

    Research output: Contribution to conference › Paper › peer-review

  176. Modelling of pressure-temperature conditions for cavitation initiation in different liquids

    Mikhailova, N., Smirnov, I. & Volkov, G., 2019, In: Vibroengineering Procedia (VP). 27, p. 121-125

    Research output: Contribution to journal › Conference article › peer-review

  177. Nanocrystalline Titanium

    Валиев, Р. З., Семенова, И. П. & Рааб, Г., 2019, 1st Edition ed. Elsevier. 259 p.

    Research output: Book/Report/Anthology › Book › peer-review

  178. SYNTHESIS OF NANOSCALE MAGNETIC MATERIALS BASED ON MESOPOROUS MATRIX OF MCM-41 NANOPARTICLES AND MAGNETITE IRON FOR TARGETED DRUG DELIVERY

    Земцова, Е. Г., Галиуллина, Л. Ф., Пономарева, А. Н., Арбенин, А. Ю. & Смирнов, В. М., 2019. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  179. The effect of hardening by annealing in ultrafine-grained Al-0.4Zr alloy: influence of Zr microadditives

    Latynina, T. A., Mavlyutov, A. M., Murashkin, M. Y., Valiev, R. Z. & Orlova, T. S., 2019, In: Philosophical Magazine. 99, 19, p. 2424-2443 20 p.

    Research output: Contribution to journal › Article › peer-review

  180. Three-component working electrode Ag particles/TiO2 layer/Ti surface: template electrochemical synthesis and potential use as electrochemical sensor for glutathione detection

    Arbenin, A. Y., Zemtsova, E. G., Ermakov, S. S., Gaskov, A. M., Sokolova, D. N., Yaroshenko, S. V. & Smirnov, V. M., 2019, (Accepted/In press) In: Materials Research Express. 7, 3, 035401.

    Research output: Contribution to journal › Article › peer-review

  181. ВЛИЯНИЕ Mg НА МИКРОСТРУКТУРУ И ПРОЧНОСТНЫЕ СВОЙСТВА УЛЬТРАМЕЛКОЗЕРНИСТОГО СПЛАВА Al-Mg-Zr.

    Латынина, Т. А., Мурашкин, М. Ю., Валиев, Р. З. & Орлова, Т. С., 2019, p. 245-247.

    Research output: Contribution to conference › Abstract

  182. Исследование влияния размеров образцов на скорость деформации при определении прочностных динамических характеристик материала

    Евстифеев, А. Д., Волков, Г. А., Чеврычкина, А. А. & Петров, Ю. В., 2019, In: ЖУРНАЛ ТЕХНИЧЕСКОЙ ФИЗИКИ. 89, 4, p. 567-570 Россия.

    Research output: Contribution to journal › Article › peer-review

  183. Исследование формирования полос сдвига и изменение свойств объемного металлического стекла на основе Zr при ИПДК

    Яппарова, Э. Х., 2019

    Research output: Other contribution › Education

  184. ОСОБЕННОСТИ МЕХАНИЧЕСКОГО ПОВЕДЕНИЯ ОБЪЕМНЫХ МЕТАЛЛИЧЕСКИХ СТЕКОЛ ПОДВЕРГНУТЫХ ИНТЕНСИВНОЙ ПЛАСТИЧЕСКОЙ ДЕФОРМАЦИИ

    Гундеров, Д. В., Болтынюк, Е. В., Убыйвовк, Е. В., Лукьянов, А. В., Чуракова, А. А., Асфандияров, Р. Н., Kilmametov, A. R., Муллаянов, А. И. & Валиев, Р. З., 2019, XII ВСЕРОССИЙСКИЙ СЪЕЗД ПО ФУНДАМЕНТАЛЬНЫМ ПРОБЛЕМАМ ТЕОРЕТИЧЕСКОЙ И ПРИКЛАДНОЙ МЕХАНИКИ. Издательство Башкирского государственного университета, Vol. 3. p. 1172-1174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  185. ОСОБЕННОСТИ МИКРОСТРУКТУРЫ И ФИЗИКО-МЕХАНИЧЕСКИЕ СВОЙСТВА УЛЬТРАМЕЛКОЗЕРНИСТЫХ АЛЮМИНИЕВЫХ СПЛАВОВ ДЛЯ ЭЛЕКТРОТЕХНИЧЕСКИХ ПРИМЕНЕНИЙ

    Мурашкин, М. Ю., Бобрук, Е. В., Орлова, Т. С., Мавлютов, А. М. & Медведев, А. Е., 2019, Уфимский государственный авиационный технический университет. 200 p.

    Research output: Book/Report/Anthology › Book › peer-review

  186. ПРОЯВЛЕНИЕ НИЗКОТЕМПЕРАТУРНОЙ СВЕРХПЛАСТИЧНОСТИ В ВЫСОКОПРОЧНОМ УЛЬТРАМЕЛКОЗЕРНИСТОМ СПЛАВЕ 7ХХХ

    Бобрук, Е. В. & Мурашкин, М. Ю., 2019, p. 13-15.

    Research output: Contribution to conference › Paper › peer-review

  187. Способ получения рабочего электрода для определения глутатиона в водных растворах на основе массивов микронных частиц серебра на поверхности титана, разделенных диэлектрическим слоем диоксида титана

    Земцова, Е. Г., Смирнов, В. М. & Арбенин, А. Ю., 2019

    Research output: Patenting and IP registration › Patent

  188. СТРУКТУРА И МЕХАНИЧЕСКОЕ ПОВЕДЕНИЕ МЕТАЛЛИЧЕСКИХ СТЕКОЛ НА ОСНОВЕ ZR, ПОДВЕРГНУТЫХ ИПД

    Гундеров, Д. В., Лукьянов, А. В., Болтынюк, Е. В., Убыйвовк, Е. В., Чуракова, А. А., Асфандияров, Р. Н. & Муллаянов, А. И., 2019, НЕФТЕГАЗОВЫЕ ТЕХНОЛОГИИ И НОВЫЕ МАТЕРИАЛЫ. ПРОБЛЕМЫ И РЕШЕНИЯ. ООО Монография, Vol. 8 (13).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  189. 2018

  190. Bulk nanostructured metals for advanced medical implants and devices

    Valiev, R. Z., Parfenov, E. V., Raab, G. I., Semenova, I. P. & Dluhoš, L., 10 Dec 2018, In: IOP Conference Series: Materials Science and Engineering. 461, 1, 012089.

    Research output: Contribution to journal › Conference article › peer-review

  191. Low Temperature Superplasticity of High-Strength Ultrafine-Grained Al 7050 alloy

    Bobruk, E. V., Murashkin, M. Y., Lomakin, I. V., Kazykhanov, V. U. & Valiev, R. Z., 10 Dec 2018, In: IOP Conference Series: Materials Science and Engineering. 461, 1, 6 p., 012090.

    Research output: Contribution to journal › Conference article › peer-review

  192. Free volume measurement of severely deformed Zr62Cu22Al10Fe5Dy1 bulk metallic glass

    Gunderov, D. V., Boltynjuk, E. V., Sitdikov, V. D., Abrosimova, G. E., Churakova, A. A., Kilmametov, A. R. & Valiev, R. Z., 5 Dec 2018, In: Journal of Physics: Conference Series. 1134, 1, 012010.

    Research output: Contribution to journal › Conference article › peer-review

  193. Fatigue properties of ultra-fine grained Al-Mg-Si wires with enhanced mechanical strength and electrical conductivity

    Medvedev, A., Arutyunyan, A., Lomakin, I., Bondarenko, A., Kazykhanov, V., Enikeev, N., Raab, G. & Murashkin, M., 1 Dec 2018, In: Metals. 8, 12, 1034.

    Research output: Contribution to journal › Article › peer-review

  194. Strength of the Ti–6Al–4V Titanium Alloy under Conditions of Impact and Short Pulse Loading

    Evstifeev, A. D., Petrov, Y. V., Kazarinov, N. A. & Valiev, R. R., 1 Dec 2018, In: Physics of the Solid State. 60, 12, p. 2358-2362 5 p.

    Research output: Contribution to journal › Article › peer-review

  195. Effect of Crack Bridging on the Toughening of Ceramic/Graphene Composites

    Бобылев, С. В. & Шейнерман, А. Г., Dec 2018, In: Reviews on Advanced Materials Science. 57, 1, p. 54-62

    Research output: Contribution to journal › Article › peer-review

  196. Features of the surface relief of TiNi alloy in coarse-grained and ultrafine-grained states at room and elevated temperatures

    Чуракова, А. А., Гундеров, Д. В. & Гильманова, Э., 21 Nov 2018, In: IOP Conference Series: Materials Science and Engineering. 447, 1, 012046.

    Research output: Contribution to journal › Conference article › peer-review

  197. High pressure torsion induced structural transformations in Ti- and Zr-based amorphous alloys

    Gunderov, D. V., Boltynjuk, E. V., Ubyivovk, E. V., Churakova, A. A., Abrosimova, G. E., Sitdikov, V. D., Kilmametov, A. R. & Valiev, R. Z., 21 Nov 2018, In: IOP Conference Series: Materials Science and Engineering. 447, 1, 012052.

    Research output: Contribution to journal › Conference article › peer-review

  198. Influence of additional severe plastic deformation at elevated temperatures on microstructure and physical-mechanical properties of ultrafine grained Al-0.4Zr alloy

    Latynina, T. A., Murashkin, Y. M., Valiev, R. Z. & Orlova, T. S., 21 Nov 2018, In: IOP Conference Series: Materials Science and Engineering. 447, 1, 012027.

    Research output: Contribution to journal › Conference article › peer-review

  199. Relations between Parameters of Fracture Processes on Different Scale Levels

    Mikhailova, N. V., Volkov, G. A., Petrov, Y. V., Smirnov, I. V., Onawumi, P., Roy, A. & Silberschmidt, V., 1 Nov 2018, In: Doklady Physics. 63, 11, p. 459-461 3 p.

    Research output: Contribution to journal › Article › peer-review

  200. Enhancement of Mechanical and Electrical Properties in Al 6101 Alloy by Severe Shear Strain under Hydrostatic Pressure

    Medvedev, A., Murashkin, M. Y., Kazykhanov, V., Valiev, R. Z., Medvedev, A. E., Hodgson, P. D. & Lapovok, R., Nov 2018, In: Advanced Engineering Materials. 20, 11, 7 p., 1800695.

    Research output: Contribution to journal › Article › peer-review

  201. Термостойкий проводниковый ультрамелкозернистый алюминиевый сплав и способ его получения

    Мурашкин, М. Ю., Смирнов, И. В. & Валиев, Р. З., 18 Sep 2018, IPC No. С22С 21/00, Patent No. 2667271, 23 Nov 2017, Priority date 23 Nov 2017

    Research output: Patenting and IP registration › Patent

  202. The effect of tungsten on microstructure and mechanical performance of an ultrafine Fe-Cr steel

    Mazilkin, A., Abramova, M. M., Enikeev, N. A., Lomakin, I. V., Valiev, R. Z., Ivanisenko, Y., Kübel, C., Etienne, A., Sauvage, X. & Radiguet, B., 15 Sep 2018, In: Materials Letters. 227, p. 292-295 4 p.

    Research output: Contribution to journal › Article › peer-review

  203. Enhanced Osseointegrative Properties of Ultra-Fine-Grained Titanium Implants Modified by Chemical Etching and Atomic Layer Deposition

    Земцова, Е. Г., Назаров, Д. В., Смирнов, В. М., Валиев, Р. З., Юдинцева, Н. М. & Шевцов, МА., 10 Sep 2018, In: ACS Biomaterials Science and Engineering. 4, 9, p. 3268-3281 27 p.

    Research output: Contribution to journal › Article › peer-review

  204. Microstructure, conductivity and mechanical properties of calcia stabilized zirconia ceramics obtained from nanosized precursor and reduced graphene oxide doped precursor powders.

    Kurapova, O. Y., Glumov, O. V., Lomakin, I. V., Golubev, S. N., Pivovarov, M. M., Krivolapova, J. V. & Konakov, V. G., 1 Sep 2018, In: Ceramics International. 44, 13, p. 15464-15471 8 p.

    Research output: Contribution to journal › Article › peer-review

  205. Tuning the structure and the mechanical properties of ultrafine grain Al–Zn alloys by short time annealing

    Бобрук, Е. В. & Еникеев, Н. А., 31 Aug 2018, In: Reviews on Advanced Materials Science. 55, 1/2, p. 61-68 8 p.

    Research output: Contribution to journal › Article › peer-review

  206. Способ импульсного термоэлектрического неразрушающего контроля теплофизических свойств металлов и полупроводников

    Судьенков, Ю. В. & Смирнов, И. В., 31 Aug 2018, Patent No. RU 2 665 590, 23 Nov 2017, Priority date 23 Nov 2017, Priority No. Российский патент

    Research output: Patenting and IP registration › Patent

  207. The effect of ultrafine-grained structure of Al-30Zn on the shape forming ability at sheet metal forming

    Бобрук, Е. В. & Мурашкин, М. Ю., 22 Aug 2018, In: Defect and Diffusion Forum. 385 DDF, p. 228-233 6 p.

    Research output: Contribution to journal › Article › peer-review

  208. Atomic force microscopy studies of severely deformed amorphous TiNiCu alloy

    Gunderov, D., Boltynjuk, E., Ubyivovk, E., Lukyanov, A., Churakova, A., Zamula, Y., Batyrshin, E., Kilmametov, A. & Valiev, R., 26 Jul 2018, Atomic force microscopy studies of severely deformed amorphous TiNiCu alloy. Defect and Diffusion Forum: Trans Tech Publications Ltd, Vol. 385 DDF. p. 200-205 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  209. Multiple shear bands in Zr-based bulk metallic glass processed by severe plastic deformation

    Boltynjuk, E., Ubyivovk, E., Gunderov, D., Mikhalovskii, V. & Valiev, R., 26 Jul 2018, Multiple shear bands in Zr-based bulk metallic glass processed by severe plastic deformation. Defect and Diffusion Forum: Trans Tech Publications Ltd, Vol. 385 DDF. p. 319-324 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  210. Superior Strength and Multiple Strengthening Mechanisms in Nanocrystalline TWIP Steel

    Kim, J. G., Enikeev, N. A., Seol, J. B., Abramova, M. M., Karavaeva, M. V., Valiev, R. Z., Park, C. G. & Kim, H. S., 25 Jul 2018, In: Scientific Reports. 8, 1, 10 p., 11200.

    Research output: Contribution to journal › Article › peer-review

  211. Microstructure, mechanical and corrosion properties of ultrafine-grained Mg-2%Sr alloy

    Kulyasova, O. B., Islamgaliev, R. K., Parfenov, E. V., Zheng, Y. F. & Valiev, R. Z., 11 Jul 2018, In: IOP Conference Series: Materials Science and Engineering. 380, 1, 012014.

    Research output: Contribution to journal › Conference article › peer-review

  212. The effect of structural changes on the mechanical properties of the Mg-1%Zn-0.2%Ca alloy processed by ECAP

    Кулясова, О. Б. & Исламгалиев, Р. К., 11 Jul 2018, In: IOP Conference Series: Materials Science and Engineering. 380, 1, 012013.

    Research output: Contribution to journal › Conference article › peer-review

  213. Molybdenum disulfide surface modification of ultrafine-grained titanium for enhanced cellular growth and antibacterial effect

    Shin, M. H., Baek, S. M., Polyakov, A. V., Semenova, I. P., Valiev, R. Z., Hwang, W. B., Hahn, S. K. & Kim, H. S., 2 Jul 2018, In: Scientific Reports. 8, 1, 10 p., 9907.

    Research output: Contribution to journal › Article › peer-review

  214. Особенности взаимодействия легирующих элементов с границами зерен и образование сегрегаций в сплавах Al–Mg и Al–Zn

    Petrik, M. V., Kuznetsov, A. R., Enikeev, N. A., Gornostyrev, Y. N. & Valiev, R. Z., 1 Jul 2018, In: Physics of Metals and Metallography. 119, 7, p. 607-612 6 p.

    Research output: Contribution to journal › Article › peer-review

  215. Microstructure, Texture and Mechanical Properties of Titanium Grade 2 Processed by ECAP (Route C)

    Wroński, M., Wierzbanowski, K., Wojtas, D., Szyfner, E., Valiev, R. Z., Kawałko, J., Berent, K. & Sztwiertnia, K., Jul 2018, In: Metals and Materials International. 24, 4, p. 802-814 13 p.

    Research output: Contribution to journal › Article › peer-review

  216. Gefügeumwandlung sowie physikalische und mechanische Eigenschaften von ultrafeinkörnigen, nanokristallinen TiNi-Legierungen unter verschiedenen martensitischen Umwandlungen B2-B19’

    Чуракова, А. А., Гундеров, Д. В. & Дмитриев, С. В., 27 Jun 2018, In: Materialwissenschaft und Werkstofftechnik. 49, 6, p. 769-783 15 p.

    Research output: Contribution to journal › Article › peer-review

  217. Long-time stability of metals after severe plastic deformation: Softening and hardening by self-annealing versus thermal stability

    Edalati, K., Hashiguchi, Y., Iwaoka, H., Matsunaga, H., Valiev, R. Z. & Horita, Z., 27 Jun 2018, In: Materials Science and Engineering A. 729, p. 340-348 9 p.

    Research output: Contribution to journal › Article › peer-review

  218. Cluster structure in amorphous Ti-Ni-Cu alloys subjected to high-pressure torsion deformation

    Gunderov, D. V., Boltynjuk, E. V., Ubyivovk, E. V., Lukyanov, A. V., Churakova, A. A., Kilmametov, A. R., Zamula, Y. S. & Valiev, R. Z., 15 Jun 2018, In: Journal of Alloys and Compounds. 749, p. 612-619 8 p.

    Research output: Contribution to journal › Article › peer-review

  219. Design and Evaluation of an Experimental Technique for Mechanical and Fatigue Testing of Sub-Sized Samples

    Lomakin, I. V., Arutyunyan, A. R., Valiev, R. R., Gadzhiev, F. A. & Murashkin, M. Y., 1 Jun 2018, In: Experimental Techniques. 42, 3, p. 261-270 10 p.

    Research output: Contribution to journal › Article › peer-review

  220. The Effect of Grain Refinement on Solid Particle Erosion of Grade 5 Ti Alloy

    Kazarinov, N. A., Evstifeev, A. D., Petrov, Y. V., Atroshenko, S. A. & Valiev, R. R., Jun 2018, In: Journal of Materials Engineering and Performance. 27, 6, p. 3054-3059 6 p.

    Research output: Contribution to journal › Article › peer-review

  221. Enhanced strain rate sensitivity of Zr-based bulk metallic glasses subjected to high pressure torsion

    Boltynjuk, E. V., Gunderov, D. V., Ubyivovk, E. V., Monclús, M. A., Yang, L. W., Molina-Aldareguia, J. M., Tyurin, A. I., Kilmametov, A. R., Churakova, A. A., Churyumov, A. Y. & Valiev, R. Z., 30 May 2018, In: Journal of Alloys and Compounds. 747, p. 595-602 8 p.

    Research output: Contribution to journal › Article › peer-review

  222. Enhancement of mechanical and electrical properties of Al-RE alloys by optimizing rare-earth concentration and thermo-mechanical treatment

    Medvedev, A. E., Murashkin, M. Y., Enikeev, N. A., Valiev, R. Z., Hodgson, P. D. & Lapovok, R., 15 May 2018, In: Journal of Alloys and Compounds. 745, p. 696-704 9 p.

    Research output: Contribution to journal › Article › peer-review

  223. Modeling of vibrations isolation and arrest by shape memory parts and permanent magnets

    Беляев, Ф. С., Евард, М. Е., Волков, А. Е., Викуленков, А. В. & Успенский, Е. С., 2 May 2018, In: AIP Conference Proceedings. 1959, 070005.

    Research output: Contribution to journal › Article › peer-review

  224. Simulation of fatigue fracture of TiNi shape memory alloy samples at cyclic loading in pseudoelastic state

    Беляев, Ф. С., Волков, А. Е., Евард, М. Е. & Хворов, А. А., 2 May 2018, In: AIP Conference Proceedings. 1959, 070004.

    Research output: Contribution to journal › Article › peer-review

  225. Technique development for conducting mechanical tests to study the pore formation process in case of material fracture

    Магомедова, Д. К., Мурашкин, М. Ю. & Ефимов, М. А., 2 May 2018, In: AIP Conference Proceedings. 1959

    Research output: Contribution to journal › Article › peer-review

  226. Multiple cracking in deformed laminated metal-graphene composites

    Sheinerman, A. G. & Gutkin, M. Y., 1 May 2018, In: Composite Structures. 191, p. 113-118 6 p.

    Research output: Contribution to journal › Article › peer-review

  227. Ultrafine-Grained Pure Ti Processed by New SPD Scheme Combining Drawing with Shear

    Raab, A. G., Bobruk, E. V. & Raab, G. I., 1 May 2018, In: Journal of Materials Engineering and Performance. 27, 5, p. 2414-2420 7 p., Volume 27, Issue 5.

    Research output: Contribution to journal › Article › peer-review

  228. Experimental and theoretical analysis of solid particle erosion of a steel compressor blade based on incubation time concept

    Evstifeev, A., Kazarinov, N., Petrov, Y., Witek, L. & Bednarz, A., May 2018, In: Engineering Failure Analysis. 87, p. 15-21 7 p.

    Research output: Contribution to journal › Article › peer-review

  229. Transition from poor ductility to room-temperature superplasticity in a nanostructured aluminum alloy

    Edalati, K., Horita, Z. & Valiev, R. Z., 30 Apr 2018, In: Scientific Reports. 8, 1, 8 p., 6740.

    Research output: Contribution to journal › Article › peer-review

  230. Influence of grain size and second phase particles on the process of void initiation

    Magomedova, D. K. & Murashkin, M. Y., 13 Apr 2018, In: Journal of Physics: Conference Series. 991, 1, 012055.

    Research output: Contribution to journal › Conference article › peer-review

  231. Improved osseointegration properties of hierarchical microtopographic/nanotopographic coatings fabricated on titanium implants

    Земцова, Е. Г., Смирнов, В. М., Морозов, П. Е., Юдинцева, Н. М., Валиев, Р. З. & Шевцов, МА., Apr 2018, In: International Journal of Nanomedicine. 13, 11, p. 2175-2188 14 p.

    Research output: Contribution to journal › Article › peer-review

  232. Modern methods of implant surface geometry modification of titanium and its alloys for enhanced biomedical characteristics

    Земцова, Е. Г., Смирнов, В. М., Арбенин, А. Ю. & Валиев, Р. З., Apr 2018, Titanium in Medical and Dental Applications. Elsevier Inc ed. United Kingdom, p. 115-145 31 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research › peer-review

  233. Optimization of Strength-Electrical Conductivity Properties in Al–2Fe Alloy by Severe Plastic Deformation and Heat Treatment

    Medvedev, A. E., Murashkin, M. Y., Enikeev, N. A., Valiev, R. Z., Hodgson, P. D. & Lapovok, R., 1 Mar 2018, In: Advanced Engineering Materials. 20, 3, 7 p., 1700867.

    Research output: Contribution to journal › Article › peer-review

  234. The PHEMU15 catalogue and astrometric results of the Jupiter's Galilean satellite mutual occultation and eclipse observations made in 2014-2015

    Saquet, E., Emelyanov, N., Robert, V., Arlot, J. E., Anbazhagan, P., Baillié, K., Bardecker, J., Berezhnoy, A. A., Bretton, M., Campos, F., Capannoli, L., Carry, B., Castet, M., Charbonnier, Y., Chernikov, M. M., Christou, A., Colas, F., Coliac, J. F., Dangl, G., Dechambre, O. & 30 others, Delcroix, M., Dias-Oliveira, A., Drillaud, C., Duchemin, Y., Dunford, R., Dupouy, P., Ellington, C., Fabre, P., Filippov, V. A., Finnegan, J., Foglia, S., Font, D., Gaillard, B., Galli, G., Garlitz, J., Gasmi, A., Gaspar, H. S., Gault, D., Gazeas, K., George, T., Gorda, S. Y., Gorshanov, D. L., Gualdoni, C., Guhl, K., Halir, K., Hanna, W., Khovritchev, M. Y., Kulikova, A. M., Slesarenko, V. Y. & Sokov, E. N., 1 Mar 2018, In: Monthly Notices of the Royal Astronomical Society. 474, 4, p. 4730-4739 10 p.

    Research output: Contribution to journal › Article › peer-review

  235. Analysis of the Strength Characteristics of Acrylonitrile-Butadiene-Styrene Plastic under Dynamic Loading

    Chevrychkina, A. A., Evstifeev, A. D. & Volkov, G. A., Mar 2018, In: Technical Physics. 63, 3, p. 381-384 4 p.

    Research output: Contribution to journal › Article › peer-review

  236. Diffusive and displacive phase transitions in Ti–Fe and Ti–Co alloys under high pressure torsion

    Straumal, B. B., Kilmametov, A. R., Ivanisenko, Y., Mazilkin, A. A., Valiev, R. Z., Afonikova, N. S., Gornakova, A. S. & Hahn, H., 25 Feb 2018, In: Journal of Alloys and Compounds. 735, p. 2281-2286 6 p.

    Research output: Contribution to journal › Article › peer-review

  237. Full-scale use of X-ray scattering techniques to characterize aged Al-2wt.%Cu alloy

    Sitdikov, V. D., Yu Murashkin, M. & Valiev, R. Z., 25 Feb 2018, In: Journal of Alloys and Compounds. 735, p. 1792-1798 7 p.

    Research output: Contribution to journal › Article › peer-review

  238. Fracture toughness at cryogenic temperatures of ultrafine-grained Ti-6Al-4V alloy processed by ECAP

    Semenova, I. P., Modina, J. M., Polyakov, A. V., Klevtsov, G. V., Klevtsova, N. A., Pigaleva, I. N., Valiev, R. Z. & Langdon, T. G., 14 Feb 2018, In: Materials Science and Engineering A. 716, p. 260-267 8 p.

    Research output: Contribution to journal › Article › peer-review

  239. Stability of the structure and properties of an ultrafine-grained Cr-Ni steel irradiated with neutrons in nuclear reactor core conditions

    Shamardin, V. K., Abramova, M. M., Bulanova, T. M., Karsakov, A. A., Fedoseev, A. E., Obukhov, A. V., Valiev, R. Z., Alexandrov, I. V., Raab, G. I. & Enikeev, N. A., 18 Jan 2018, In: Materials Science and Engineering A. 712, p. 365-372 8 p.

    Research output: Contribution to journal › Article › peer-review

  240. Способ получения заготовки из наноструктурного сплава Ti49,3Ni50,7 с эффектом памяти формы

    Валиев, Р. З., Гундеров, Д. В., Рааб, Г. И., Прокофьев, Е. А., Чуракова, А. А. & Ломакин, И. В., 12 Jan 2018, IPC No. C22F 1/16 (2006.01), B82Y 40/00 (2011.01), B21J 5/00 (2006.01), Patent No. 2 641 207, 6 Dec 2016

    Research output: Patenting and IP registration › Patent

  241. Dependence of strength characteristics of aluminum alloys on strain rate under tension

    Evstifeev, A., Chevrychkina, A., Petrov, Y. & Atrochenko, S., 1 Jan 2018, In: Procedia Structural Integrity. 13, p. 886-889 4 p.

    Research output: Contribution to journal › Article › peer-review

  242. Enhanced oxidation resistance and microhardness of NI-YSZ composites via the forging in air

    Kurapova, O. Y., Solovyeva, E. N., Lomakin, I. V., Ushakov, V. M., Archakov, I. Y. & Konakov, V. G., 1 Jan 2018, In: Reviews on Advanced Materials Science. 55, 1-2, p. 118-123 6 p.

    Research output: Contribution to journal › Article › peer-review

  243. Enhanced strength and ductility of an ultrafine-grained Ti alloy processed by HPT

    Valiev, R. R., Lomakin, I. V., Stotskiy, A. G., Modina, Y. M., Shafranov, P. G. & Gadzhiev, F. A., 1 Jan 2018, Superplasticity in Advanced Materials - ICSAM 2018. Kaibyshev, R., Tikhonova, M., Itoh, G., Taleff, E. M. & Sato, E. (eds.). Trans Tech Publications Ltd, Vol. 385 DDF. p. 331-336 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  244. Hardening by annealing and implementation of high ductility of ultra-fine grained aluminum: Experiment and theory

    Orlova, T. S., Skiba, N. V., Mavlyutov, A. M., Murashkin, M. Y., Valiev, R. Z. & Gutkin, M. Y., 1 Jan 2018, In: Reviews on Advanced Materials Science. 57, 2, p. 224-240 17 p.

    Research output: Contribution to journal › Article › peer-review

  245. Influence of ultrafine-grained structure produced by equal-channel angular pressing on the dynamic response of pure copper

    Smirnov, I. & Konstantinov, A., 1 Jan 2018, ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY. Sedmak, A., Radakovic, Z. & Rakin, M. (eds.). Elsevier, p. 1336-1341 6 p. (Procedia Structural Integrity; vol. 13).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  246. Nanostructured commercially pure titanium for development of miniaturized biomedical implants

    Valiev, R. Z., Sabirov, I., Zemtsova, E. G., Parfenov, E. V., Dluhoš, L. & Lowe, T. C., 1 Jan 2018, Titanium in Medical and Dental Applications. Froes, F. & Qian, M. (eds.). Elsevier, p. 393-417 25 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research › peer-review

  247. Relation between structure of metallic materials and fracture properties under conditions of solid particle erosion

    Atroshenko, S. A., Evstifeev, A. D. & Petrov, Y. V., 1 Jan 2018, In: Procedia Structural Integrity. 13, p. 1359-1361 3 p.

    Research output: Contribution to journal › Conference article › peer-review

  248. Strength and Fracture Mechanisms of Nanostructured Metallic Materials Under Single Kinds of Loading

    Klevtsov, G. V., Valiev, R. Z., Klevtsova, N. A., Zaripov, N. G. & Karavaeva, M. V., 1 Jan 2018, In: Metal Science and Heat Treatment. 59, 9-10, p. 597-605 9 p.

    Research output: Contribution to journal › Article › peer-review

  249. Structural-time nature of the dynamic instability of the fracture process

    Petrov, Y. & Kazarinov, N., 1 Jan 2018, In: Procedia Structural Integrity. 13, p. 1620-1625 6 p.

    Research output: Contribution to journal › Conference article › peer-review

  250. Studies on the superplasticity effect in UFA: History and development (in memory of Prof. O.A. Kaibyshev)

    Valiev, R. Z., Salishchev, G. A., Utyashev, F. Z. & Langdon, T. G., 1 Jan 2018, In: Reviews on Advanced Materials Science. 54, 1, p. 14-24 11 p.

    Research output: Contribution to journal › Article › peer-review

  251. About the choice of Gibbs' potential for modelling of FCC → HCP transformation in FeMnSi-based shape memory alloys

    Евард, М. Е., Волков, А. Е., Беляев, Ф. С. & Игнатова, А., 2018, In: AIP Conference Proceedings. 1959, 070010.

    Research output: Contribution to journal › Article › peer-review

  252. Aging Effect on the One-way and Two-way Shape Memory in TiNi-based Alloys. Experimental Study and Microstructural Modeling

    Волков, А. Е., Беляев, Ф. С., Евард, М. Е., Остропико, Е. С. & Разов, А. И., 2018.

    Research output: Contribution to conference › Abstract › peer-review

  253. A model of enhanced strain rate sensitivity in nanocrystalline and ultrafine-grained metals

    Sheinerman, A. G. & Bobylev, S., 2018, In: Reviews on Advanced Materials Science. 57, 1, p. 1-10 10 p.

    Research output: Contribution to journal › Article › peer-review

  254. High pressure torsion induced strustural transformation in Ti- and Zr-based amorphous alloys

    Gunderov, D., Boltynjuk, E., Ubyivovk, E., Churakova, A., Abrosimova, G. E., Ситдиков, В. Д., Kilmametov, A. R. & Valiev, R. Z., 2018, In: IOP Conference Series: Materials Science and Engineering. 447, 012052.

    Research output: Contribution to journal › Article › peer-review

  255. Impact Toughness and Dynamic Compression of Ultrafine-Grained Pure Copper Produced by Equal-Channel Angular Pressing

    Smirnov, I. & Konstantinov, A., 2018, EIGHTH POLYAKHOV'S READING. Kustova, E., Leonov, G., Morosov, N., Yushkov, M. & Mekhonoshina, M. (eds.). American Institute of Physics, 6 p. (AIP Conference Proceedings; vol. 1959).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  256. Impact Toughness and Dynamic Compression of Ultrafine-Grained Titanium Grade 4

    Смирнов, И. В. & Константинов, А., 2018, 4TH INTERNATIONAL CONFERENCE ON ADVANCED ENGINEERING AND TECHNOLOGY (4TH ICAET). IOP Publishing Ltd., 5 p. (IOP Conference Series-Materials Science and Engineering; vol. 317).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  257. INFLUENCE OF RARE-EARTH (Ce, La) CONCENTRATION ON MICROSTRUCTURE, MECHANICAL AND PHYSICAL PROPERTIES OF ALUMINIUM ALLOYS SUBJECTED TO SEVERE PLASTIC DEFORMATION

    Medvedev, A. E., Мурашкин, М. Ю., Бобрук, Е. В., Enikeev, N. A., Lapovok, R. & Валиев, Р. З., 2018, МАТЕРИАЛЫ ВСЕРОССИЙСКОЙ НАУЧНОЙ КОНФЕРЕНЦИИ С МЕЖДУНАРОДНЫМ УЧАСТИЕМ "III БАЙКАЛЬСКИЙ МАТЕРИАЛОВЕДЧЕСКИЙ ФОРУМ". Хайкина, Е. (ed.). Бурятский научный центр СО РАН, Vol. 1. p. 184-185 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Article in an anthology › Research › peer-review

  258. INFLUENCE OF SEVERE PLASTIC DEFORMATION ON MICROSTRUCTURE, STRENGTH AND ELECTRICAL CONDUCTIVITY OF AGED Al-0.4Zr(wt.%) ALLOY

    Orlova, T. S., Mavlyutov, A. M., Latynina, T. A., Ubyivovk, E., Murashkin, M. Y., Schneiders, R., Gerthsen, D. & Valiev, R. Z., 2018, In: Reviews on Advanced Materials Science. 55, 1-2, p. 92-101 10 p.

    Research output: Contribution to journal › Article › peer-review

  259. Investigation of strength characteristics of aluminum alloy under dynamic tension

    Evstifeev, A. D., 2018, In: Journal of Physics: Conference Series. 991, 1, 5 p., 012019.

    Research output: Contribution to journal › Conference article › peer-review

  260. Microstructural Simulation of Fatigue Fracture of TiNi and FeMn-based Shape Memory Alloy Samples

    Евард, М. Е., Беляев, Ф. С. & Волков, А. Е., 2018, 11th European Symposium on Martensitic Transformations, August 27 - 31, 2018, Metz, France : Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research › peer-review

  261. MICROSTRUCTURE, MECHANICAL PROPERTIES AND ELECTRICAL CONDUCTIVITY OF THE AL ALLOY, SUBJECTED TO THE NOVEL SPD METHOD - HIGH PRESURE TORSION EXTRUSION

    Мурашкин, М. Ю. & Бобрук, Е. В., 2018, МАТЕРИАЛЫ ВСЕРОССИЙСКОЙ НАУЧНОЙ КОНФЕРЕНЦИИ С МЕЖДУНАРОДНЫМ УЧАСТИЕМ «III БАЙКАЛЬСКИЙ МАТЕРИАЛОВЕДЧЕСКИЙ ФОРУМ» (9–15 ИЮЛЯ 2018 Г., Г. УЛАН-УДЭ). Ч. 1.. Хайкина, Е. (ed.). Бурятский научный центр СО РАН, p. 18-19

    Research output: Chapter in Book/Report/Conference proceeding › Article in an anthology › Research › peer-review

  262. Modelling nonlinear effects of agents information interaction in social networks

    Smirnov, I. A., Dmitrieva, L. A., Kuperin, Y. A. & Pazgalova, E. Y., 2018, Micro and Nano Technologies, Space Technologies and Planetary Science. 2.1 ed. International Multidisciplinary Scientific Geoconference, p. 575-582 8 p. (International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM; vol. 18, no. 2.1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  263. Molecular dynamics simulation of the effect of dislocations on the martensitic transformations in a two-dimensional model

    Dmitriev, S. V., Kashchenko, M. P., Baimova, J. A., Babicheva, R. I., Gunderov, D. V. & Pushin, V. G., 2018, In: Letters on Materials. 7, 4, p. 442-446

    Research output: Contribution to journal › Article › peer-review

  264. Relation between structure of metallic materials and fracture properties under conditions of solid particle erosion

    Atroshenko, S. A., Evstifeev, A. D. & Petrov, Y. V., 2018, Loading and Environment effects on Structural Integrity: book of abstracts. Belgrade, p. 372

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research › peer-review

  265. Structural organization of the magnetic part of smart material based on nanoparticles of iron or magnetite in pores of MCM-41 mesoporous silica for target drug delivery

    Zemtsova, E. G., Ponomareva, A. N., Arbenin, A. Y. & Smirnov, V. M., 2018, In: Reviews on Advanced Materials Science. 57, 2, p. 175-182 8 p.

    Research output: Contribution to journal › Article › peer-review

  266. Влияние длительного хранения на функциональные свойства сплавов с памятью формы

    Беляев, Ф. С., Волков, А. Е., Евард, М. Е., Остропико, Е. С. & Разов, А. И., 2018, p. 62.

    Research output: Contribution to conference › Paper › peer-review

  267. ВЛИЯНИЕ РАЗМЕРА ЗЕРНА НА ПРОЦЕСС ПОРООБРАЗОВАНИЯ В AL-6101

    Магомедова, Д. К., 2018, p. 319-321. 3 p.

    Research output: Contribution to conference › Abstract › peer-review

  268. Объемные наноструктурные материалы с многофункциональными свойствами

    Сабиров, И. Н., Еникеев, Н. А., Мурашкин, М. Ю. & Валиев, Р. З., 2018, Эко-Вектор. 135 p.

    Research output: Book/Report/Anthology › Book › peer-review

  269. Процесс наноструктурирования металлической иматрицы дисперсной фазой (TiC) для направленного регулирования механических свойств

    Земцова, Е. Г., Морозов, Н. Ф., Арбенин, А. Ю., Семенов, Б. Н., Морозов, П. Е. & Смирнов, В. М., 2018, Проблемы динамики взаимодействия деформируемых сред: Труды IX международной конференции. Ерреван: National Academy of Sciences of the Republic of Armenia, p. 180-181

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  270. СВЕРХПЛАСТИЧНОСТЬ УЛЬТРАМЕЛКОЗЕРНИСТЫХ АЛЮМИНИЕВЫХ СПЛАВОВ

    Бобрук, Е. В., Мурашкин, М. Ю., Медведев, А. Е., Казыханов, В. У. & Валиев, Р. З., 2018, Материалы Всероссийской научной конференции с международным участием "III Байкальский материаловедческий форум": В 2-х частях. Ч. 1. Улан-Удэ, p. 153-154

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research › peer-review

  271. 2017

  272. HPT-induced shear banding and nanoclustering in a TiNiCu amorphous alloy

    Ubyivovk, E. V., Boltynjuk, E. V., Gunderov, D. V., Churakova, A. A., Kilmametov, A. R. & Valiev, R. Z., 15 Dec 2017, In: Materials Letters. 209, p. 327-329 3 p.

    Research output: Contribution to journal › Article › peer-review

  273. Room-Temperature Superplasticity in an Ultrafine-Grained Magnesium Alloy

    Edalati, K., Masuda, T., Arita, M., Furui, M., Sauvage, X., Horita, Z. & Valiev, R. Z., 1 Dec 2017, In: Scientific Reports. 7, 1, 2662.

    Research output: Contribution to journal › Article › peer-review

  274. Effect of annealing on the microstructure and mechanical properties of ultrafine-grained commercially pure Al

    Mavlyutov, A. M., Latynina, T. A., Murashkin, M. Y., Valiev, R. Z. & Orlova, T. S., 1 Oct 2017, In: Physics of the Solid State. 59, 10, p. 1970-1977 8 p.

    Research output: Contribution to journal › Article › peer-review

  275. New X-Ray Technique to Characterize Nanoscale Precipitates in Aged Aluminum Alloys

    Sitdikov, V. D., Murashkin, M. Y. & Valiev, R. Z., 1 Oct 2017, In: Journal of Materials Engineering and Performance. 26, 10, p. 4732-4737 6 p.

    Research output: Contribution to journal › Article › peer-review

  276. Bioactive coating with two-layer hierarchy of relief obtained by sol-gel method with shock drying and osteoblast response of its structure

    Земцова, Е. Г., Смирнов, В. М., Орехов, Е., Арбенин, А. Ю. & Юдинцева, Н. М., Oct 2017, In: Nanomaterials. 7, 10, 7 p., 323.

    Research output: Contribution to journal › Article › peer-review

  277. High-rate erosion of Ti–6Al–4V ultrafine-grained titanium alloy obtained via intensive plastic torsional deformation

    Evstifeev, A. D., Kazarinov, N. A., Petrov, Y. V., Atroshenko, S. A. & Valiev, R. R., 1 Sep 2017, In: Physics of the Solid State. 59, 9, p. 1794-1797 4 p.

    Research output: Contribution to journal › Article › peer-review

  278. Paramagnetic susceptibility of the Zr62Cu22Al10Fe5Dy1 metallic glass subjected to high-pressure torsion deformation

    Korolev, A. V., Kourov, N. I., Pushin, V. G., Gunderov, D. V., Boltynjuk, E. V., Ubyivovk, E. V. & Valiev, R. Z., 1 Sep 2017, In: Journal of Magnetism and Magnetic Materials. 437, p. 67-71 5 p.

    Research output: Contribution to journal › Letter › peer-review

  279. Grain boundary sliding, triple junction disclinations and strain hardening in ultrafine-grained and nanocrystalline metals

    Ovid'Ko, I. A. & Sheinerman, A. G., Sep 2017, In: International Journal of Plasticity. 96, p. 227-241 15 p.

    Research output: Contribution to journal › Article › peer-review

  280. Effect of cold rolling on the structure and hydrogen properties of AZ91 and AM60D magnesium alloys processed by ECAP

    Jorge, A. M., Prokofiev, E., Triques, M. R. M., Roche, V., Botta, W. J., Kiminami, C. S., Raab, G. I., Valiev, R. Z. & Langdon, T. G., 24 Aug 2017, In: International Journal of Hydrogen Energy. 42, 34, p. 21822-21831 10 p.

    Research output: Contribution to journal › Article › peer-review

  281. GRAPHENE-MODIFIED BULK NICKEL COMPOSITE-INVESTIGATION OF STRUCTURE AND MECHANICAL CHARACTERISTICS

    Konakov, V. G., Kurapova, O. Y., Lomakin, I. V., Novik, N. N., Sergeev, S. N., Solovyeva, E. N., Zhilyaev, A. P., Archakov, I. Y. & Ovid’ko, I. A., Aug 2017, In: Reviews on Advanced Materials Science. 50, 1\2, p. 1-12

    Research output: Contribution to journal › Article › peer-review

  282. Microstructure evolution and strengthening mechanisms in commercial-purity titanium subjected to equal-channel angular pressing

    Dyakonov, G. S., Mironov, S., Semenova, I. P., Valiev, R. Z. & Semiatin, S. L., 31 Jul 2017, In: Materials Science and Engineering A. 701, p. 289-301 13 p.

    Research output: Contribution to journal › Article › peer-review

  283. Ultra-severe plastic deformation: Evolution of microstructure, phase transformation and hardness in immiscible magnesium-based systems

    Edalati, K., Uehiro, R., Fujiwara, K., Ikeda, Y., Li, H. W., Sauvage, X., Valiev, R. Z., Akiba, E., Tanaka, I. & Horita, Z., 31 Jul 2017, In: Materials Science and Engineering A. 701, p. 158-166 9 p.

    Research output: Contribution to journal › Article › peer-review

  284. Effect of SPD processing on mechanical behavior and dynamic strain aging of an Al-Mg alloy in various deformation modes and wide strain rate range

    Сабиров, И. Н. & Мурашкин, М. Ю., 1 Jun 2017, In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 696, p. 348-359 12 p.

    Research output: Contribution to journal › Article › peer-review

  285. Mechanical behavior and impact toughness of the ultrafine-grained Grade 5 Ti alloy processed by ECAP

    Semenova, I. P., Polyakov, A. V., Polyakova, V. V., Grishina, Y. F., Huang, Y., Valiev, R. Z. & Langdon, T. G., 1 Jun 2017, In: Materials Science and Engineering A. 696, p. 166-173 8 p.

    Research output: Contribution to journal › Article › peer-review

  286. Enhanced fatigue properties of Ti-6Al-4V alloy turbine blades via formation of ultra-fine grained structure and ion implantation of surface

    Semenova, I. P., Smyslova, M. K., Selivanov, K. S., Valiev, R. R. & Modina, Y. M., 8 May 2017, In: IOP Conference Series: Materials Science and Engineering. 194, 1, 012035.

    Research output: Contribution to journal › Conference article › peer-review

  287. Precipitates studies in ultrafine-grained Al alloys with enhanced strength and conductivity

    Sitdikov, V. D., Murashkin, M. Y. & Valiev, R. Z., 8 May 2017, In: IOP Conference Series: Materials Science and Engineering. 194, 1, 012034.

    Research output: Contribution to journal › Conference article › peer-review

  288. The 7th International Conference on Nanomaterials by Severe Plastic Deformation: A report of the International NanoSPD Steering Committee

    Valiev, R. Z. & Langdon, T. G., 8 May 2017, In: IOP Conference Series: Materials Science and Engineering. 194, 1, 012001.

    Research output: Contribution to journal › Conference article › peer-review

  289. Effect of self-ion irradiation on the microstructural changes of alloy EK-181 in annealed and severely deformed conditions

    Aydogan, E., Chen, T., Gigax, J. G., Chen, D., Wang, X., Dzhumaev, P. S., Emelyanova, O. V., Ganchenkova, M. G., Kalin, B. A., Leontiva-Smirnova, M., Valiev, R. Z., Enikeev, N. A., Abramova, M. M., Wu, Y., Lo, W. Y., Yang, Y., Short, M., Maloy, S. A., Garner, F. A. & Shao, L., 15 Apr 2017, In: Journal of Nuclear Materials. 487, p. 96-104 9 p.

    Research output: Contribution to journal › Article › peer-review

  290. Проводниковый ультрамелкозернистый алюминиевый сплав и способ его получения

    Мурашкин, М. Ю., Медведев, А. Е., Смирнов, И. В. & Валиев, Р. З., 14 Apr 2017, IPC No. С22С 21/00 С22F 1/04, Patent No. 2616316, 6 Nov 2017, Priority date 6 Nov 2017

    Research output: Patenting and IP registration › Patent

  291. Effect of annealing on microhardness and electrical resistivity of nanostructured SPD aluminium

    Mavlyutov, A. M., Bondarenko, A. S., Murashkin, M. Y., Boltyniuk, E. V., Valiev, R. Z. & Orlova, T. S., 25 Mar 2017, In: Journal of Alloys and Compounds. 698, p. 539-546 8 p.

    Research output: Contribution to journal › Article › peer-review

  292. Effect of combined loading on the microstructure and microhardness of austenitic steel

    Karavaeva, M. V., Abramova, M. M., Enikeev, N. A., Raab, G. I. & Valiev, R. Z., 1 Mar 2017, In: Letters on Materials. 7, 1, p. 29-33 5 p.

    Research output: Contribution to journal › Article › peer-review

  293. Influence of grain boundary misorientations on the mechanical behavior of a near-α Ti-6Al-7Nb alloy processed by ECAP

    Polyakova, V. V., Semenova, I. P., Polyakov, A. V., Magomedova, D. K., Huang, Y. & Langdon, T. G., 1 Mar 2017, In: Materials Letters. 190, p. 256-259 4 p.

    Research output: Contribution to journal › Article › peer-review

  294. Orientation magnetic phase transition induced by shock loading of the Fe-Cr-Co alloy

    Sud’enkov, Y. V., Sarnatskii, V. M. & Smirnov, I. V., Feb 2017, In: Physics of the Solid State. 59, 2, p. 287-291 5 p.

    Research output: Contribution to journal › Article › peer-review

  295. Impact of the nanostructuration on the corrosion resistance and hardness of irradiated 316 austenitic stainless steels

    Hug, E., Prasath Babu, R., Monnet, I., Etienne, A., Moisy, F., Pralong, V., Enikeev, N., Abramova, M., Sauvage, X. & Radiguet, B., 15 Jan 2017, In: Applied Surface Science. 392, p. 1026-1035 10 p.

    Research output: Contribution to journal › Article › peer-review

  296. Effect of initial grain size on the microstructure and mechanical properties of high-pressure torsion processed twinning-induced plasticity steels

    Kim, J. G., Enikeev, N. A., Abramova, M. M., Park, B. H., Valiev, R. Z. & Kim, H. S., 13 Jan 2017, In: Materials Science and Engineering A. 682, p. 164-167 4 p.

    Research output: Contribution to journal › Article › peer-review

  297. An experimental investigation of the strength characteristics of ABS plastic under dynamic loads

    Chevrychkina, A. A., Volkov, G. A. & Evstifeev, A. D., 1 Jan 2017, In: Procedia Structural Integrity. 6, p. 283-285 3 p.

    Research output: Contribution to journal › Article › peer-review

  298. Ballistic Characteristics of Bi-layered Armour with Various Aluminium Backing against Ogive Nose Projectile

    Venkatesan, J., Iqbal, M. A., Gupta, N. K., Bratov, V., Kazarinov, N. & Morozov, F., 1 Jan 2017, XXVII INTERNATIONAL CONFERENCE: MATHEMATICAL AND COMPUTER SIMULATION IN MECHANICS OF SOLIDS AND STRUCTURES - FUNDAMENTALS OF STATIC AND DYNAMIC FRACTURE (MCM 2017). Petrov, Y. & Silberschmidt (eds.). Elsevier, p. 40-47 8 p. (Procedia Structural Integrity; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  299. Behavior of an ultrafine-grained grade 5 Ti alloy subjected to solid particle erosion

    Kazarinov, N. A., Evstifeev, A. D., Petrov, Y., Atroshenko, S. A. & Valiev, R. R., 1 Jan 2017, p. 1166-1167. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  300. Dynamic strength effects of quasi brittle failure of rocks and concrete in terms of the structural-temporal approach

    Smirnov, I. & Konstantinov, A., 1 Jan 2017, p. 372-373. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  301. Electrical breakdown strength of the dielectric elastomer VHB under quasi-static and pulsed voltage

    Smirnov, I., Springhetti, R., Morozov, V. A. & Lukin, A. A., 1 Jan 2017, ICF 2017 - 14th International Conference on Fracture. Gdoutos, E. E. (ed.). Curran Associates, Inc. , p. 922-923 2 p. (ICF 2017 - 14th International Conference on Fracture; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  302. Experimental investigation of dynamic crack propagation in PMMA plates

    Kazarinov, N., Smirnov, I., Sudenkov, Y., Petrov, Y. & Slesarenko, V., 1 Jan 2017, XXVII INTERNATIONAL CONFERENCE: MATHEMATICAL AND COMPUTER SIMULATION IN MECHANICS OF SOLIDS AND STRUCTURES - FUNDAMENTALS OF STATIC AND DYNAMIC FRACTURE (MCM 2017). Petrov, Y. & Silberschmidt (eds.). Elsevier, p. 83-89 7 p. (Procedia Structural Integrity; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  303. Grain boundary wetting transition in Al–Mg alloys

    Straumal, B. B., Kogtenkova, O. A., Murashkin, M. Y., Bulatov, M. F., Czeppe, T. & Zięba, P., 1 Jan 2017, In: Materials Letters. 186, p. 82-85 4 p.

    Research output: Contribution to journal › Article › peer-review

  304. Influence of Zn content on the microstructure and mechanical performance of ultrafine-grained Al–Zn alloys processed by high-pressure torsion

    Chinh, N. Q., Jenei, P., Gubicza, J., Bobruk, E. V., Valiev, R. Z. & Langdon, T. G., 1 Jan 2017, In: Materials Letters. 186, p. 334-337 4 p.

    Research output: Contribution to journal › Article › peer-review

  305. Investigation of the Elastoplastic and Strength Properties of the Magnesium Alloy AZ31B under Quasi-static and Dynamic Loading

    Atroshenko, S., Sud'Enkov, Y., Smirnov, I., Zhu, S. W. & Morozov, N., 1 Jan 2017, In: Procedia Structural Integrity. 6, p. 259-264 6 p.

    Research output: Contribution to journal › Article › peer-review

  306. Microstructure and mechanical properties of ultrafine-grained Mg-Zn-Ca alloy

    Kulyasova, O. B., Islamgaliev, R. K. & Valiev, R. Z., 1 Jan 2017, Compound Materials and Nanotechnology - ICNFCM 2017. Taib, H. (ed.). Trans Tech Publications Ltd, Vol. 381 DDF. p. 39-43 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  307. Microstructure and thermal stability of nanocrystalline Mg-Gd-Y-Zr alloy processed by high pressure torsion

    Tang, L., Zhao, Y., Islamgaliev, R. K., Valiev, R. Z. & Zhu, Y. T., 1 Jan 2017, In: Journal of Alloys and Compounds. 721, p. 577-585 9 p.

    Research output: Contribution to journal › Article › peer-review

  308. Oxidation resistance and microhardness of NI-YSZ composites, manufactured by powder metallurgy technique

    Kurapova, O. Y., Lomakin, I. V., Solovieva, E. N., Archakov, I. Y. & Konakov, V. G., 1 Jan 2017, In: Reviews on Advanced Materials Science. 52, 1-2, p. 99-106 8 p.

    Research output: Contribution to journal › Article › peer-review

  309. The structural temporal approach to dynamic and quasi-static strength of rocks and concrete

    Smirnov, I., Konstantinov, A., Bragov, A., Lomunov, A. & Petrov, Y., 1 Jan 2017, XXVII INTERNATIONAL CONFERENCE: MATHEMATICAL AND COMPUTER SIMULATION IN MECHANICS OF SOLIDS AND STRUCTURES - FUNDAMENTALS OF STATIC AND DYNAMIC FRACTURE (MCM 2017). Petrov, Y. & Silberschmidt (eds.). Elsevier, p. 34-39 6 p. (Procedia Structural Integrity; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  310. Experimental and Numerical Analysis of the High-Speed Deformation and Erosion Damage of the Titanium Alloy VT-6

    Petrov, Y. V., Bragov, A. M., Kazarinov, N. A. & Evstifeev, A. D., Jan 2017, In: Physics of the Solid State. 59, 1, p. 93-97 5 p.

    Research output: Contribution to journal › Article › peer-review

  311. Modification of the surface topography and composition of ultrafine and coarse grained titanium by chemical etching

    Земцова, Е. Г., Смирнов, В. М., Назаров, Д. В., Валиев, Р. З. & Солохин, А. Ю., Jan 2017, In: Nanomaterials. 7, 1, 15 p., 15.

    Research output: Contribution to journal › Article › peer-review

  312. Behavior of lateral-deformation coefficients during elastoplastic deformation of metals

    Zimin, B. A., Smirnov, I. V. & Sudenkov, Y. V., 2017, In: Doklady Physics. 62, 6, p. 306-309 4 p.

    Research output: Contribution to journal › Article › peer-review

  313. Behavior of the grade 5 titanium alloy in different structural states in conditions of high-speed erosion

    Atroshenko, S. A., Evstifeev, A. D., Kazarinov, N. A., Petrov, Y. V. & Valiev, R. Z., 2017, Procedia Structural Integrity: XXVII International Conference «Mathematical and Computer Simulation in Mechanics of Solids and Structures. Fundamentals of static and dynamic fracture»,MCM 2017,25-27 September 2017, Saint-Petersburg, Russia. Petrov, Y. & Silberschmidt (eds.). Elsevier, Vol. 6. p. 190-195 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  314. COLLECTIVE MIGRATION OF LOW-ANGLE TILT BOUNDARIES IN NANOCRYSTALLINE METALS UNDER FATIGUE LOADING

    Konakov, Y. V., Ovid'ko, I. A., Sheinerman, A. G. & Skiba, N. V., 2017, In: Reviews on Advanced Materials Science. 52, 1-2, p. 113-120 8 p.

    Research output: Contribution to journal › Article › peer-review

  315. Deformation and fracture processes in pre-cracked graphene

    Kochnev, A. S., Ovid'Ko, I. A., Semenov, B. N. & Sevastyanov, Y. A., 2017, In: Reviews on Advanced Materials Science. 50, 1-2, p. 24-30 7 p.

    Research output: Contribution to journal › Article › peer-review

  316. Dynamic strength properties of an ultra-fine-grained aluminum alloy under tension conditions

    Evstifeev, A. D., Chevrychkina, A. A. & Petrov, Y. V., 2017, In: Materials Physics and Mechanics. 32, 3, p. 258-261 4 p.

    Research output: Contribution to journal › Article › peer-review

  317. ENHANCED STRENGTH AND SCRATCH RESISTANCE OF ULTRA-FINE GRAINED Ti64 ALLOY WITH (Ti plus V) N COATING

    Semenova, I. P., Valiev, R. R., Selivanov, K. S., Modina, Y. M., Polyakov, A. V., Smyslova, M. K. & Valiev, R. R., 2017, In: Reviews on Advanced Materials Science. 48, 1, p. 62-70 9 p.

    Research output: Contribution to journal › Article › peer-review

  318. Features of the mechanical behavior of ultrafine-grained and nanostructured TiNi alloys

    Gunderov, D., Churakova, A., Lukyanov, A., Prokofiev, E., Pushin, V., Kreitcberg, A. & Prokoshkin, S., 2017, In: Materials Today: Proceedings. 4, 3, p. 4825-4829 5 p.

    Research output: Contribution to journal › Article › peer-review

  319. Features of the sol-gel synthesis of TiO2 nanolayers with calcium phosphate structures on titanium surface

    Арбенин, А. Ю., Земцова, Е. Г., Орехов, Е. & Смирнов, В. М., 2017, In: Russian Journal of General Chemistry. 87, 2, p. 340-341 2 p.

    Research output: Contribution to journal › Article › peer-review

  320. MECHANICAL PROPERTIES OF GRAPHENE CONTAINING ELONGATED TETRAVACANCIES (575757-666-5757 DEFECTS)

    Kochnev, A. S., Ovid'ko, A., Semenov, B. N. & Sevastyanov, Y. A., 2017, In: Reviews on Advanced Materials Science. 48, 2, p. 142-146 5 p.

    Research output: Contribution to journal › Article › peer-review

  321. Mechanical properties of nanostructured titanium with bioactive titanium-organic nanocoating

    Zemtsova, E. G., Morozov, N. F., Semenov, B. N., Valiev, R. Z. & Smirnov, V. M., 2017, In: Materials Physics and Mechanics. 32, 3, p. 253-257 5 p.

    Research output: Contribution to journal › Article › peer-review

  322. Mechanisms of precipitation induced by large strains in the Al-Cu system

    Nasedkina, Y., Sauvage, X., Bobruk, E. V., Murashkin, M. Y., Valiev, R. Z. & Enikeev, N. A., 2017, In: Journal of Alloys and Compounds. 710, p. 736-747 12 p.

    Research output: Contribution to journal › Article › peer-review

  323. Micromechanisms of plastic deformation in nanotwinned materials

    Skiba, N. V., Ovid'ko, I. A., Sheinerman, A. G. & Konakov, Y. V., 2017, In: Materials Physics and Mechanics. 30, 1, p. 40-52 13 p.

    Research output: Contribution to journal › Review article › peer-review

  324. Plastic deformation through stress-induced migration of high-angle grain boundaries in metal-graphene nanocomposites

    Bobylev, S. V., Morozov, N. F. & Ovid'ko, I. A., 2017, In: Reviews on Advanced Materials Science. 48, 2, p. 131-141 11 p.

    Research output: Contribution to journal › Article › peer-review

  325. Reversible strain in bimetallic TiNi-based shape memory composites produced by explosion welding

    Belyaev, S., Rubanik, V., Resnina, N., Lomakin, I. & Demidova, E., 2017, In: Materials Today: Proceedings. 4, 3, p. 4696-4701 6 p.

    Research output: Contribution to journal › Article › peer-review

  326. Split dislocation loops and jogged islocations in deformed columnar-grained anotwinned metals

    Ovid'ko, I. A. & Sheinerman, A. G., 2017, In: Reviews on Advanced Materials Science. 50, 1-2, p. 37-46 10 p.

    Research output: Contribution to journal › Article › peer-review

  327. Исследование механических свойств чистого никеля и композита «Ni-YSZ»: растяжение, сжатие и усталость

    Конаков, В. Г., Арутюнян, А. Р., Ломакин, И. В., Соловьева, Е. Н., Курапова, О. Ю., Новик, Н. Н. & Овидько, И. А., 2017, In: ФИЗИКА И МЕХАНИКА МАТЕРИАЛОВ. 30, 1, p. 93-101

    Research output: Contribution to journal › Article › peer-review

  328. Микромеханика пластической деформации посредством миграции границ зерен в нанокомпозитах металл-графен

    Бобылев, С. В., Морозов, Н. Ф. & Овидько, И. А., 2017, In: ДОКЛАДЫ АКАДЕМИИ НАУК. 473, 1, p. 37-40 4 p.

    Research output: Contribution to journal › Article › peer-review

  329. Микроструктура и нанорельеф аморфного сплава Ti-Ni-Cu, подвергнутого интенсивной пластической деформации

    Убыйвовк, Е. В., Гундеров, Д. В., Чуракова, А. А., Лукьянов, А. В., Болтынюк, Е. В., Замула, Ю. С., Батыршин, Э. С., Хасанова, Д. А. & Заманова, Г. И., 2017, In: ВЕСТНИК БАШКИРСКОГО УНИВЕРСИТЕТА. 4, 5 p.

    Research output: Contribution to journal › Article › peer-review

  330. Моделирование необратимой деформации и разрушения никелида титана при термоциклировани

    Беляев, Ф. С., Волков, А. Е. & Евард, М. Е., 2017, In: ДЕФОРМАЦИЯ И РАЗРУШЕНИЕ МАТЕРИАЛОВ. 5, p. 12-17 6 p.

    Research output: Contribution to journal › Article › peer-review

  331. Моделирование необратимой деформации и разрушения никелида титана при термоциклировании

    Волков, А. Е., Беляев, Ф. С. & Евард, М. Е., 2017, In: ДЕФОРМАЦИЯ И РАЗРУШЕНИЕ МАТЕРИАЛОВ. 5

    Research output: Contribution to journal › Article › peer-review

  332. Нанокристаллизация и кластеризация в аморфном сплаве Ti50Ni25Cu25 при ИПДК

    Убыйвовк, Е. В., Гундеров, Д. В., Болтынюк, Е. В., Чуракова, А. А. & Кшуманев, А. М., 2017, In: НЕФТЕГАЗОВЫЕ ТЕХНОЛОГИИ.

    Research output: Contribution to journal › Article › peer-review

  333. Объемные наноструктурные материалы: фундаментальные основы и применения

    Жиляев, А. П., Лэнгдон, Т. Д. & Валиев, Р. З., 2017, СПб: Эко-Вектор. 480 p.

    Research output: Book/Report/Anthology › Book › peer-review

  334. Процессы на поверхности раздела фаз: учебное пособие

    Бобрук, Е. В., 2017, Уфа: Уфимский государственный авиационный технический университет. 110 p.

    Research output: Book/Report/Anthology › Teaching manual › peer-review

  335. Эффект задержки разрушения при разрушении стальных образцов в условиях откола

    Михайлова, Н. В., Волков, Г. А., Петров, Ю. В., Уткин, А. А. & Мещеряков, Ю. И., 2017, In: ЖУРНАЛ ТЕХНИЧЕСКОЙ ФИЗИКИ. 87, 4, p. 527-532

    Research output: Contribution to journal › Article › peer-review

  336. 2016

  337. Устройство для контроля механических свойств материала под нагрузкой

    Судьенков, Ю. В. & Смирнов, И. В., 29 Dec 2016, Patent No. RU 171185, Priority date 29 Dec 2016, Priority No. Российский патент

    Research output: Patenting and IP registration › Patent

  338. Two-Level Micro-to-Nanoscale Hierarchical TiO2 Nanolayers on Titanium Surface

    Земцова, Е. Г., Арбенин, А. Ю., Валиев, Р. З., Орехов, Е., Семенов, В. Г. & Смирнов, В. М., 13 Dec 2016, In: Materials. 9, 12, 13 p., 1010.

    Research output: Contribution to journal › Article › peer-review

  339. Free surface effects on stress-driven grain boundary sliding and migration processes in nanocrystalline materials

    Ovid'ko, I. A. & Sheinerman, A. G., 1 Dec 2016, In: Acta Materialia. 121, p. 117-125 9 p.

    Research output: Contribution to journal › Article › peer-review

  340. Tensile fracture behavior of a Zr-based bulk metallic glass subjected to HPT

    Gunderov, D. V., Boltynuk, E. V., Ubyivovk, E. V., Churakova, A. A., Lukyanov, A. V., Raab, A. G., Khasanova, D. A. & Churyumov, A. Y., Dec 2016, In: Письма о материалах. 6, 4, p. 322-326 5 p.

    Research output: Contribution to journal › Article › peer-review

  341. Localized deformation via multiple twinning in a Mg–Gd–Y–Zr alloy processed by high-pressure torsion

    Tang, L., Zhao, Y., Liang, N., Islamgaliev, R. K., Valiev, R. Z. & Zhu, Y. T., 20 Nov 2016, In: Materials Science and Engineering A. 677, p. 68-75 8 p.

    Research output: Contribution to journal › Article › peer-review

  342. Influence of coherent nanoinclusions on stress-driven migration of low-angle grain boundaries in nanocomposites

    Konakov, Y. V., Ovid’ko, I. A. & Sheinerman, A. G., 1 Sep 2016, In: Physics of the Solid State. 58, 9, p. 1819-1825 7 p.

    Research output: Contribution to journal › Article › peer-review

  343. Surface Roughness Investigation of Ultrafine-Grained Aluminum Alloy Subjected to High-Speed Erosion

    Kazarinov, N. A., Evstifeev, A. D., Petrov, Y. V., Atroshenko, S. A., Lashkov, V. A., Valiev, R. Z. & Bondarenko, A. S., Sep 2016, In: Journal of Materials Engineering and Performance. 25, 9, p. 3573-3579 7 p.

    Research output: Contribution to journal › Article › peer-review

  344. Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP

    Tang, L., Zhao, Y., Islamgaliev, R. K., Tsao, C. Y. A., Valiev, R. Z., Lavernia, E. J. & Zhu, Y. T., 18 Jul 2016, In: Materials Science and Engineering A. 670, p. 280-291 12 p.

    Research output: Contribution to journal › Article › peer-review

  345. Zero-valent Fe confined mesoporous silica nanocarriers (Fe(0) @ MCM-41) for targeting experimental orthotopic glioma in rats

    Shevtsov, M. A., Parr, M. A., Ryzhov, V. A., Zemtsova, E. G., Arbenin, A. Y., Ponomareva, A. N., Smirnov, V. M. & Multhoff, G., 8 Jul 2016, In: Scientific Reports. 6, 29247.

    Research output: Contribution to journal › Article › peer-review

  346. Free surface effects on rotational deformation in nanocrystalline materials

    Ovid’ko, I. A. & Sheinerman, A. G., 1 Jul 2016, In: Journal of Materials Science. 51, 13, p. 6444-6451 8 p.

    Research output: Contribution to journal › Article › peer-review

  347. Contribution of grain boundary related strain accommodation to deformation of ultrafine-grained palladium

    Ivanisenko, Y., Enikeev, N. A., Yang, K., Smoliakov, A., Soloviev, V. P., Fecht, H. & Hahn, H., 21 Jun 2016, In: Materials Science and Engineering A. 668, p. 255-262 8 p.

    Research output: Contribution to journal › Article › peer-review

  348. Structure and mechanical properties of the Mg-Y-Gd-Zr alloy after high pressure torsion

    Dobatkin, S. V., Rokhlin, L. L., Lukyanova, E. A., Murashkin, M. Y., Dobatkina, T. V. & Tabachkova, N. Y., 14 Jun 2016, In: Materials Science and Engineering A. 667, p. 217-223 7 p.

    Research output: Contribution to journal › Article › peer-review

  349. Nucleation of cracks near the free surface in deformed metallic nanomaterials with a bimodal structure

    Ovid’ko, I. A. & Sheinerman, A. G., 1 Jun 2016, In: Physics of the Solid State. 58, 6, p. 1179-1183 5 p.

    Research output: Contribution to journal › Article › peer-review

  350. High-strain induced reverse martensitic transformation in an ultrafine-grained Ti-Nb-Ta-Zr alloy

    Li, Z., Zheng, B., Kurmanaeva, L., Zhou, Y., Valiev, R. Z. & Lavernia, E. J., 3 May 2016, In: Philosophical Magazine Letters. 96, 5, p. 189-195 7 p.

    Research output: Contribution to journal › Article › peer-review

  351. Dynamic strength properties of the surface of an ultra-fine-grained aluminum alloy under conditions of high-speed erosion

    Kazarinov, N. A., Evstifeev, A. D., Petrov, Y. V. & Lashkov, V. A., May 2016, In: Doklady Physics. 61, 5, p. 232-234 3 p.

    Research output: Contribution to journal › Article › peer-review

  352. Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later

    Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zehetbauer, M. J. & Zhu, Y., 1 Apr 2016, In: JOM. 68, 4, p. 1216-1226 11 p.

    Research output: Contribution to journal › Article › peer-review

  353. Formation of fully austenitic ultrafine-grained high strength state in metastable Cr-Ni-Ti stainless steel by severe plastic deformation

    Dobatkin, S. V., Rybalchenko, O. V., Enikeev, N. A., Tokar, A. A. & Abramova, M. M., 1 Mar 2016, In: Materials Letters. 166, p. 276-279 4 p.

    Research output: Contribution to journal › Article › peer-review

  354. About formability of ultrafine grained metallic materials

    Сабиров, И. Н., Moreno-Valle, E. C., Мурашкин, М. Ю. & Валиев, Р. З., 20 Jan 2016, In: Materials Science Forum. 838-839, p. 476-481 6 p.

    Research output: Contribution to journal › Article › peer-review

  355. About formability of ultra-fine grained metallic materials

    Sabirov, I., Moreno-Valle, E., Murashkin, M. Y. & Valiev, R. Z., 1 Jan 2016, Superplasticity in Advanced Materials, ICSAM 2015. Itoh, G., Kobayashi, J., Kitazono, K., Sato, E., Takayama, Y., Itoi, T. & Morita, K. (eds.). Trans Tech Publications Ltd, p. 476-481 6 p. (Materials Science Forum; vol. 838-839).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  356. Advances in superplasticity of ultrafine-grained alloys: Recent research and development

    Valiev, R. Z. & Semenova, I. P., 1 Jan 2016, Superplasticity in Advanced Materials, ICSAM 2015. Itoh, G., Kobayashi, J., Kitazono, K., Sato, E., Takayama, Y., Itoi, T. & Morita, K. (eds.). Trans Tech Publications Ltd, p. 23-33 11 p. (Materials Science Forum; vol. 838-839).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  357. Dynamic crack propagation: Quasistatic and impact loading

    Petrov, Y., Kazarinov, N. & Bratov, V., 1 Jan 2016, In: Procedia Structural Integrity. 2, p. 389-394 6 p.

    Research output: Contribution to journal › Article › peer-review

  358. Fundamentals of superior properties in bulk NanoSPD materials

    Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zehetbauer, M. J. & Zhu, Y. T., 1 Jan 2016, In: Materials Research Letters. 4, 1, p. 1-21 21 p.

    Research output: Contribution to journal › Article › peer-review

  359. General effects of pulse electric breakdown of dielectric gaps and dynamic failure of continuous media

    Petrov, Y. & Smirnov, I., 1 Jan 2016, In: Procedia Structural Integrity. 2, p. 430-437 8 p.

    Research output: Contribution to journal › Article › peer-review

  360. Investigation of specimen size effects by in-situ microcompression of equal channel angular pressed copper

    Howard, C., Frazer, D., Lupinacci, A., Parker, S., Valiev, R. Z., Shin, C., William Choi, B. & Hosemann, P., 1 Jan 2016, In: Materials Science and Engineering A. 649, p. 104-113 10 p.

    Research output: Contribution to journal › Article › peer-review

  361. Microstructure, strength, electrical conductivity and heat resistance of an Al-Mg-Zr alloy after ECAP-conform and cold drawing

    Murashkin, M. Y., Medvedev, A. E., Kazykhanov, V. U., Raab, G. I., Ovid'ko, I. A. & Valiev, R. Z., 1 Jan 2016, In: Reviews on Advanced Materials Science. 47, 1-2, p. 16-25 10 p.

    Research output: Contribution to journal › Article › peer-review

  362. Microstructure transformation in a cast Cu-Fe alloy at high pressure torsion deformation

    Lukyanov, A., Churakova, A., Gunderov, D., Filatov, A., Antipov, E., Sitdikov, V., Ganeev, A., Valiev, R. & Pushin, V., 1 Jan 2016, In: Reviews on Advanced Materials Science. 45, 1-2, p. 20-27 8 p.

    Research output: Contribution to journal › Article › peer-review

  363. Nanostructured Al and Cu alloys with superior strength and electrical conductivity

    Murashkin, M. Y., Sabirov, I., Sauvage, X. & Valiev, R. Z., 1 Jan 2016, In: Journal of Materials Science. 51, 1, p. 33-49 17 p.

    Research output: Contribution to journal › Article › peer-review

  364. Simulation of small-angle X-ray scattering curves to determine the size, shape and distribution of secondary phases in dynamically aged aluminum alloy 6201

    Sitdikov, V. D., Chizhov, P. S., Murashkin, M. Y. & Valiev, R. Z., 1 Jan 2016, In: Reviews on Advanced Materials Science. 47, 1-2, p. 59-65 7 p.

    Research output: Contribution to journal › Article › peer-review

  365. Simulation the dynamics of a composite cylindrical shell with a gas-permeable layer under the internal impulse loading

    Konstantinov, A. Y., Kochetkov, A. V., Krylov, S. V. & Smirnov, I. V., 1 Jan 2016, In: Materials Physics and Mechanics. 28, 1-2, p. 39-42 4 p.

    Research output: Contribution to journal › Article › peer-review

  366. Structure and mechanical characteristics of Ni - 1 WT.% Y2O3-92ZrO2 nanocomposites fabricated by powder metallurgy method

    Konakov, V. G., Kurapova, O. Y., Arutyunyan, A. R., Lomakin, I. V., Solovyeva, E. N., Novik, N. N. & Ovid'Ko, I. A., 1 Jan 2016, In: Materials Physics and Mechanics. 27, 1, p. 90-97 8 p.

    Research output: Contribution to journal › Article › peer-review

  367. Study of deformation and failure of bitumens for asphalt mixtures under dynamic loads

    Smirnov, I. V., Petrov, Y. V., Konstatntinov, A. Y., Bragov, A. M. & Lomunov, A. K., 1 Jan 2016, Proceedings of the 9th International Symposium on Impact Engineering: Recent Advances in Impact Engineering. Chang, S-H., Lee, W-S. & Chang, I-L. (eds.). Trans Tech Publications Ltd, p. 43-47 5 p. (Key Engineering Materials; vol. 715).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  368. Bimetallic shape memory alloy composites produced by explosion welding: Structure and martensitic transformation

    Belyaev, S., Rubanik, V., Resnina, N., Rubanik, V. J., Demidova, E. & Lomakin, I., 2016, In: Journal of Materials Processing Technology. 234, p. 323-331 10 p.

    Research output: Contribution to journal › Article › peer-review

  369. Deformation and Fracture Processes in Graphene Nanoribbons with Linear Quadrupoles of Disclinations.

    Kochnev, A. S., Morozov, N. F., Ovid’ko, I. A. & Semenov, B. N., 2016, In: Doklady Physics. 61, 5, p. 239–242 4 p.

    Research output: Contribution to journal › Article › peer-review

  370. Mechanical and electrical properties of an ultrafine grained Al-8.5wt. % RE (RE=5.4wt.% Ce, 3.1wt.% La) alloy processed by severe plastic deformation

    Murashkin, M. Y., Sabirov, I., Medvedev, A. E., Enikeev, N. A., Lefebvre, W., Valiev, R. Z. & Sauvage, X., 2016, In: Materials and Design. 90, p. 433-442 10 p.

    Research output: Contribution to journal › Article › peer-review

  371. Nucleation of nanograins through stress-driven migration and splitting of grain boundaries in nanomaterials and gum metals

    Ovid'Ko, I. A., Skiba, N. V. & Sheinerman, A. G., 2016, In: Reviews on Advanced Materials Science. 45, 1-2, p. 91-96 6 p.

    Research output: Contribution to journal › Article › peer-review

  372. Optoacoustic investigations of mechanical properties of ultrafine-grained aluminum AD1 after severe plastic deformation by torsion and thermal treatment

    Semenov, B. N., Smirnov, I. V. & Sud'enkov, Y. V., 2016, In: Reviews on Advanced Materials Science. 45, 1-2, p. 52-58 7 p.

    Research output: Contribution to journal › Article › peer-review

  373. Plastic deformation through de-twinning mediated by incoherent twin boundaries in nanotwinned metallic alloys

    Ovid'ko, I. A. & Sheinerman, A. G., 2016, In: Reviews on Advanced Materials Science. 47, 1-2, p. 1-8 8 p.

    Research output: Contribution to journal › Article › peer-review

  374. Sol–Gel Synthesis of Coatings Based on Titanium Oxide with Two-Level Structure Organization

    Arbenin, A. Y., Zemtsova, E. G., Ponomaryova, A. N. & Smirnov, V. M., 2016, In: Russian Journal of General Chemistry. 86, 4, p. 992-993

    Research output: Contribution to journal › Article › peer-review

  375. Specifi c Features of Etching of Ultrafi neand Coarse-Grained Titanium in Base and Acid Solutions of Hydrogen Peroxide

    Nazarov, D. V., Zemtsova, E. G., Valiev, R. Z. & Smirnov, V. M., 2016, In: Russian Journal of Applied Chemistry. 89, 2, p. 344-346

    Research output: Contribution to journal › Article › peer-review

  376. Superplasticity of Highly Disclinated Graphene

    Kochnev, A. S., Ovid'ko, I. A. & Semenov, B. N., 2016, In: Reviews on Advanced Materials Science. 47, 1/2, p. 79-85 7 p.

    Research output: Contribution to journal › Article

  377. Surface roughness investigation of ultrafine-grained aluminum alloy subjected to high speed erosion

    Kazarinov, N., Evstifeev, A., Petrov, Y., Lashkov, V., Atroshenko, S. & Valiev, R., 2016, In: Procedia Structural Integrity. p. 485-492 8 p.

    Research output: Contribution to journal › Conference article

  378. Surface roughness investigation of ultrafine-grained aluminum alloy subjected to high speed erosion

    Kazarinov, N. A., Evsyifeev, A. D., Petrov, Y. V., Atroshenko, S. A., Lashkov, V. A., Valiev, R. Z. & Bondarenko, A. S., 2016, In: Procedia Structural Integrity. 2, p. 485-492

    Research output: Contribution to journal › Article › peer-review

  379. The creation of nanocoatings of various morphology on the basis of titanium dioxide on a titanium matrix for bone implant

    Земцова, Е. Г., Смирнов, В. М., Орехов, Е., Арбенин, А. Ю. & Валиев, Р. З., 2016, In: Materials Physics and Mechanics. p. 138-144 29 (2).

    Research output: Contribution to journal › Article › peer-review

  380. The strength competition effect at different strain rates

    Evstifeev, A., Petrov, Y., Bragov, A. & Konstantinov, A., 2016, In: Procedia Structural Integrity. 2, p. 446-451 6 p.

    Research output: Contribution to journal › Article › peer-review

  381. The Structural Properties of Zr-based Bulk Metallic Glasses Subjected to High Pressure Torsion at Different Temperatures

    Boltynjuk, E. V., Gunderov, D. V., Ubyivovk, E. V., Lukianov, A. V., Kshumanev, A. M., Bednarz, A. & Valiev, R. Z., 2016, The Structural Properties of Zr-based Bulk Metallic Glasses Subjected to High Pressure Torsion at Different Temperatures. American Institute of Physics, Vol. 1748. p. 1-7 7 p. 030006

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  382. The synthesis of titanium-organic nanostructures on nanotitanium surface for biocompatible coating development

    Zemtsova, E. G., Morozov, P. E., Valiev, R. Z., Orekhov, J. & Smirnov, V. M., 2016, In: Reviews on Advanced Materials Science. 45, 1-2, p. 59-66 8 p.

    Research output: Contribution to journal › Article › peer-review

  383. Transmission of deformation twins across grain boundaries in nanocrystalline and ultrafine-grained metals

    O'Vidko, I. A. & Sheinerman, A. G., 2016, In: Reviews on Advanced Materials Science. 45, 1-2, p. 76-83 8 p.

    Research output: Contribution to journal › Article › peer-review

  384. ДЕФОРМАЦИЯ ПОРИСТОГО ОБРАЗЦА ИЗ СПЛАВА С ПАМЯТЬЮ ФОРМЫ С ПОПЕРЕЧНОЙ ОРИЕНТАЦИЕЙ ПОР ОТНОСИТЕЛЬНО ОСИ НАГРУЖЕНИЯ

    Волков, А. Е., Евард, М. Е. & Япарова, Е. Н., 2016, Актуальные проблемы прочности: сборник тезисов LVII международной конференции, 24-27 мая, 2016 г.. Севастополь: Севастопольский государственный университет, p. 203 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research

  385. ИЗМЕРЕНИЯ УПРУГИХ МОДУЛЕЙ В ОБЪЁМНЫХ НАНОСТРУКТУРИРОВАННЫХ МАТЕРИАЛАХ, ПОЛУЧЕННЫХ ИНТЕНСИВНЫМИ ПЛАСТИЧЕСКИМИ ДЕФОРМАЦИЯМИ

    Магомедова, Д. К., 2016, МЕХАНИКА 2016: труды международной школы-конференции молодых ученых. Национальный университет архитектуры и строительства Армении, p. 85-89 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  386. ИССЛЕДОВАНИЕ МЕТОДОМ НАНОИНДЕНТИРОВАНИЯ МЕХАНИЧЕСКОГО ПОВЕДЕНИЯ ПОДВЕРГНУТОГО ИПДК АМОРФНОГО СПЛАВА ZR62CU22AL10FE5DY1

    Болтынюк, Е. В., Гундеров, Д. В., Убыйвовк, Е. В., Monclus, M. A., Чурюмов, А. Ю. & Валиев, Р. З., 2016, VI Всероссийская конференция по наноматериалам с элементами научной школы для молодежи. Сборник материалов.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research

  387. Применение балочной модели для расчета деформации пористого образца из сплава с памятью формы

    Волков, А. Е., Евард, М. Е. & Япарова, Е. Н., 2016, Сплавы с эффектом памяти формы: Тезисы докладов Второй международной научной конференции к 85-летию со дня рождения В.А. Лихачева. СПб: Издательство «ВВМ», p. 19 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference abstracts › Research

  388. Процессы деформации и разрушенияв графене с бивакансиями типа 555–777.

    Кочнев, А. С., Морозов, Н. Ф., Овидько, И. А. & Семенов, Б. Н., 2016, In: ДОКЛАДЫ АКАДЕМИИ НАУК. 468, 6, p. 672-675

    Research output: Contribution to journal › Article › peer-review

  389. Процессы деформации и разрушения в графеновых нанолентах с линейными квадруполями дисклинаций

    Кочнев, А. С., Морозов, Н. Ф., Овидько, И. А. & Семенов, Б. Н., 2016, In: ДОКЛАДЫ АКАДЕМИИ НАУК. 468, 3, p. 272-275 4 p.

    Research output: Contribution to journal › Article › peer-review

  390. Прочность и механизмы разрушения объемных наноструктурированных металлических материалов

    Бобрук, Е. В. & Валиев, Р. З., 2016, 240 p. Уфа, РФ : Уфимский государственный авиационный технический университет.

    Research output: Other contribution › Education

  391. Структура и механические характеристики нанокомпозита Ni—1 вес. % Y2O3-92ZrO2, полученного методом порошковой металлургии

    Конаков, В. Г., Курапова, О. Ю., Арутюнян, А. Р., Ломакин, И. В., Соловьева, Е. Н., Новик, Н. Н. & Овидько, И. А., 2016, In: ФИЗИКА И МЕХАНИКА МАТЕРИАЛОВ. 27, 1, p. 90-97

    Research output: Contribution to journal › Article › peer-review

  392. СТРУКТУРА И МИКРОТВЕРДОСТЬ АМОРФНОГО СПЛАВА НА ОСНОВЕ ZR, ПОДВЕРГНУТОГО ИПД И ОТЖИГУ

    Гундеров, Д. В., Болтынюк, Е. В., Убыйвовк, Е. В., Чуракова, А. А., Лукьянов, А. В., Прокофьев, Е. А., Кшуманев, А. М., Рерих, С. И., Пономарева, В. В., Мулюков, В. Ф. & Хасанова, Д. А., 2016, Нефтегазовые технологии и новые материалы. Проблемы и решения: сборник научных трудов (25-летию АН РБ посвящается). Вып. 5(10). Уфа: ООО Монография, p. 382-389

    Research output: Chapter in Book/Report/Conference proceeding › Article in an anthology › Research › peer-review

  393. УМЗ СТРУКТУРА И МЕХАНИЧЕСКИЕ СВОЙСТВА МАГНИЕВОГО СПЛАВА MG-1%CA

    Кулясова, О. Б., Чернейкина, Я. В., Исламгалиев, Р. К. & Валиев, Р. З., 2016, In: ВЕСТНИК УФИМСКОГО ГОСУДАРСТВЕННОГО АВИАЦИОННОГО ТЕХНИЧЕСКОГО УНИВЕРСИТЕТА. 20, 3, p. 25-30

    Research output: Contribution to journal › Article

  394. 2015

  395. Editorial

    Valiev, R. Z., Estrin, Y., Toth, L. S. & Lowe, T. C., 1 Dec 2015, In: Advanced Engineering Materials. 17, 12, p. 1708-1709 2 p.

    Research output: Contribution to journal › Editorial › peer-review

  396. Effect of neutron irradiation on the microstructure and the mechanical and corrosion properties of the ultrafine-grained stainless Cr–Ni steel

    Maksimkin, O. P., Gusev, M. N., Tsai, K. V., Yarovchuk, A. V., Rybalchenko, O. V., Enikeev, N. A., Valiev, R. Z. & Dobatkin, S. V., 1 Dec 2015, In: Physics of Metals and Metallography. 116, 12, p. 1270-1278 9 p.

    Research output: Contribution to journal › Article › peer-review

  397. X-ray studies of dynamic aging in an aluminum alloy subjected to severe plastic deformation

    Sitdikov, V. D., Chizhov, P. S., Murashkin, M. Y., Goidenko, A. A. & Valiev, R. Z., 1 Dec 2015, In: Materials Characterization. 110, p. 222-227 6 p.

    Research output: Contribution to journal › Article › peer-review

  398. Enhanced mechanical properties and electrical conductivity in ultrafine-grained Al 6101 alloy processed via ECAP-conform

    Murashkin, M., Medvedev, A., Kazykhanov, V., Krokhin, A., Raab, G., Enikeev, N. & Valiev, R. Z., 20 Nov 2015, In: Metals. 5, 4, p. 2148-2164 17 p.

    Research output: Contribution to journal › Article › peer-review

  399. Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability

    Karavaeva, M. V., Kiseleva, S. K., Ganeev, A. V., Protasova, E. O., Ganiev, M. M., Simonova, L. A. & Valiev, R. Z., 27 Oct 2015, In: Journal of Materials Science. 50, 20, p. 6730-6738 9 p.

    Research output: Contribution to journal › Article › peer-review

  400. Electrochemical anisotropy of nanostructured titanium for biomedical implants

    Matykina, E., Arrabal, R., Valiev, R. Z., Molina-Aldareguia, J. M., Belov, P. & Sabirov, I., 9 Oct 2015, In: Electrochimica Acta. 176, p. 1220-1231 12 p.

    Research output: Contribution to journal › Article › peer-review

  401. Investigation of the Deformation Activation Volume of an Ultrafinegrained Ti50Ni50 Alloy

    Gunderov, D. V., Churakova, A. A., Lukianov, A. V., Prokofiev, E. A., Prokoshkin, S. D., Kreizberg, A. Y., Raab, G. I. & Sabirov, I. N., 1 Oct 2015, In: Russian Physics Journal. 58, 6, p. 864-868 5 p.

    Research output: Contribution to journal › Article › peer-review

  402. Superior mechanical properties of nanostructured light metallic materials and their innovation potential

    Murashkin, M., Sabirov, I., Enikeev, N. & Valiev, R., 24 Jul 2015, Handbook of Mechanical Nanostructuring. Wiley-Blackwell, p. 17-33

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research › peer-review

  403. Crystallization behavior of Fe- and Co-based bulk metallic glasses and their glass-forming ability

    Louzguine-Luzgin, D. V., Bazlov, A. I., Ketov, S. V. & Inoue, A., 15 Jul 2015, In: Materials Chemistry and Physics. 162, p. 197-206 10 p., 18156.

    Research output: Contribution to journal › Article › peer-review

  404. Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys

    Gunderov, D. V., Maksutova, G., Churakova, A., Lukyanov, A., Kreitcberg, A., Raab, G. I., Sabirov, I. & Prokoshkin, S., 1 Jun 2015, In: Scripta Materialia. 102, p. 99-102 4 p.

    Research output: Contribution to journal › Article › peer-review

  405. Solar radiation pressure influence in motion of asteroids, including near-Earth objects

    Martyusheva, A., Oskina, K., Petrov, N. & Polyakhova, E., 13 May 2015, 2015 International Conference on Mechanics - Seventh Polyakhov's Reading. Tikhonov, A. A. (ed.). Institute of Electrical and Electronics Engineers Inc., 7106756. (2015 International Conference on Mechanics - Seventh Polyakhov's Reading).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  406. Anomalous multiplication of lattice dislocations at grain boundaries in nanocrystalline solids

    Bobylev, S. V. & Ovid'Ko, I. A., 2015, In: Journal of Physics D - Applied Physics. 48, 3, p. 035302

    Research output: Contribution to journal › Article

  407. Bulk Nanostructured Materials with Multifunctional Properties

    Sabirov, I., Enikeev, N. A., Murashkin, M. Y. & Valiev, R. Z., 2015, Springer Nature. 118 p.

    Research output: Book/Report/Anthology › Book › peer-review

  408. Critical stress for dislocation formation in deformed twinned nanowires

    Bobylev, S. V. & Sheinerman, A. G., 2015, In: Reviews on Advanced Materials Science. 43, 1/2, p. 31-37

    Research output: Contribution to journal › Article › peer-review

  409. Defect-assisted Fracture of Polycrystalline Graphene

    Ovid'ko, I. A. & Sheinerman, A. G., 2015, 4TH INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING FOR ADVANCED TECHNOLOGIES (ICMEAT 2015). 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research

  410. Effect of heat treatment on the mechanical properties of ultrafine-grained aluminium

    Semenov, B. N., Smirnov, I. V., Sudenkov, Y. V. & Tatarinova, N. V., 2015, In: Materials Physics and Mechanics. 4, p. 319-324

    Research output: Contribution to journal › Article › peer-review

  411. Effects of incoherent nanoinclusions on stress-driven migration of low-angle grain boundaries in nanocomposites

    Ovid’ko, I. A. & Sheinerman, A. G., 2015, In: Journal of Materials Science. 50, 12, p. 4430-4439

    Research output: Contribution to journal › Article

  412. Electrical breakdown of a dielectric on the voltage pulse trailing edge: Investigation in terms of the incubation time concept

    Petrov, Y. V., Morozov, V. A., Smirnov, I. V. & Lukin, A. A., 2015, In: Technical Physics. 60, 12, p. 1733-1737

    Research output: Contribution to journal › Article

  413. Enhanced Strengthening in Ultrafine-Grained Al-Mg-Si Alloys Produced via ECAP with Parallel Channels

    Bobruk, E. V., Kazykhanov, V. U., Murashkin, M. Y. & Valiev, R. Z., 2015, In: Advanced Engineering Materials. 12, p. 1733-1737

    Research output: Contribution to journal › Article

  414. Enhancement of the mechanical properties of an Mg-Zn-Ca alloy using high-pressure torsion

    Kulyasova, O. B., Islamgaliev, R. K., Zhao, Y. & Valiev, R. Z., 2015, In: Advanced Engineering Materials. p. 1738-1741

    Research output: Contribution to journal › Article

  415. Evolution of the amorphous structure in melt-spun Ti50Ni25Cu25 alloy subjected to high pressure torsion deformation

    Gunderov, D. V., Slesarenko, V. Y., Churakova, A. A., Lukyanov, A. V., Soshnikova, E. P., Pushin, V. G. & Valiev, R. Z., 2015, In: Intermetallics. 66, p. 77-81

    Research output: Contribution to journal › Article

  416. Fatigue Behavior of an Ultrafine-Grained Al-Mg-Si Alloy Processed by High-Pressure Torsion

    Murashkin, M., Sabirov, I., Prosvirnin, D., Ovid'ko, I., Terentiev, V., Valiev, R. & Dobatkin, S., 2015, In: Metals. 5, 2, p. 578-590

    Research output: Contribution to journal › Article

  417. Formation of micro- and nanostructures on the nanotitanium surface by chemical etching and deposition of titania films by Atomic Layer Deposition (ALD)

    Nazarov, D. V., Zemtsova, E. G., Valiev, R. Z. & Smirnov, V. M., 2015, In: Materials. 12, p. 8366-8377

    Research output: Contribution to journal › Article

  418. Functional Properties of Shape Memory Bimetal Plate

    Belyaev, S., Evard, M., Lomakin, I., Resnina, N., Rubanik, V. J. & Volkov, A., 2015, In: Materials Today: Proceedings. 2, Suppl.3, p. S723-S726

    Research output: Contribution to journal › Conference article › peer-review

  419. Generation of deformation twin pairs at grain boundaries in nanomaterials

    Bobylev, S. V., Morozov, N. F. & Ovid'ko, I. A., 2015, In: Reviews on Advanced Materials Science. 41, 1/2, p. 1-6

    Research output: Contribution to journal › Article › peer-review

  420. Generation of nanoscale deformation twins at free surfaces in nanocrystalline and ultrafine-grained bulk materials, thin films and micropillars

    Ovidko, I. A. & Skiba, N. V., 2015, In: Reviews on Advanced Materials Science. 1-2, p. 22-30

    Research output: Contribution to journal › Article › peer-review

  421. Influence of nanotwins on stress-driven migration of grain boundaries in deformed nanomaterials

    Ovid'ko, I. A. & Skiba, N. V., 2015, In: Materials Physics and Mechanics. 4, p. 364-373

    Research output: Contribution to journal › Article › peer-review

  422. Influence of the microstructure on the physicomechanical properties of the aluminum alloy Al–Mg–Si nanostructured under severe plastic deformation

    Mavlyutov, A. M., Kasatkin, I. A., Murashkin, M. Y., Valiev, R. Z. & Orlova, T. S., 2015, In: Physics of the Solid State. 10, p. 2051-2058

    Research output: Contribution to journal › Article

  423. Mechanical behavior of ultrafine-grained Al-5Zn, Al-10Zn, Al-30Zn alloys

    Bobruk, E. V., Sauvage, X., Enikeev, N. A., Straumal, B. B. & Valiev, R. Z., 2015, In: Reviews on Advanced Materials Science. 43, 1-2, p. 45-51 7 p.

    Research output: Contribution to journal › Article › peer-review

  424. Micromechanics of plastic deformation of nanotwinned metals due to twin widening

    Morozov, N. F., Ovid’ko, I. A. & Skiba, N. V., 2015, In: Doklady Physics. 11, p. 507-510

    Research output: Contribution to journal › Article

  425. Micromechanics of the transition from intergrain to intragrain deformation in nanomaterials

    Bobylev, S. V., Morozov, N. F. & Ovid’ko, I. A., 2015, In: Doklady Physics. 12, p. 573-576

    Research output: Contribution to journal › Article

  426. Modeling of Metal Flow during Processing by Multi-ECAP-Conform

    Fakhretdinova, E. I., Raab, G. I. & Valiev, R. Z., 2015, In: Advanced Engineering Materials. 12, p. 1723-1727

    Research output: Contribution to journal › Article

  427. Nanocrystalline Ti produced by cryomilling and consolidation by severe plastic deformation

    Semenova, I., Timokhina, I., Islamgaliev, R., Lavernia, E. & Valiev, R., 2015, In: Metals. 1, p. 206-215

    Research output: Contribution to journal › Article

  428. Nanostructuring and Phase Transformations in the β-Alloy Ti-15Mo during High-Pressure Torsion

    Gatina, S., Semenova, I., Leuthold, J. & Valiev, R., 2015, In: Advanced Engineering Materials. 12, p. 1742-1747

    Research output: Contribution to journal › Article

  429. Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al-Mg-Si alloys

    Sauvage, X., Bobruk, E. V., Murashkin, M. Y., Nasedkina, Y., Enikeev, N. A. & Valiev, R. Z., 2015, In: Acta Materialia. 98, p. 355-366

    Research output: Contribution to journal › Article

  430. Plastic Deformation Modes in Ultrafine-grained Metals with Nanotwinned Structures

    Ovid'ko, I. A., Skiba, N. V. & Sheinerman, A. G., 2015, In: Reviews on Advanced Materials Science. 41, 1/2, 6 p.

    Research output: Contribution to journal › Article › peer-review

  431. Plastic deformation through detwinning and its effect on electric resistivity in ultrafine-grained metals with nanotwinned structures

    Ovid'Ko, I. A., Skiba, N. V. & Sheinerman, A. G., 2015, In: Reviews on Advanced Materials Science. 43, 1/2, p. 38-44

    Research output: Contribution to journal › Article › peer-review

  432. Recent Advances in Processing and Application of Nanostructured Titanium for Dental Implants

    Polyakov, A. V., Dluho, L., Dyakonov, G. S., Raab, G. I. & Valiev, R. Z., 2015, In: Advanced Engineering Materials. p. 1869-1875

    Research output: Contribution to journal › Article

  433. Stability of an Amorphous TiCuNi Alloy Subjected to High-Pressure Torsion at Different Temperatures

    Gunderov, D., Slesarenko, V., Lukyanov, A., Churakova, A., Boltynjuk, E., Pushin, V., Ubyivovk, E., Shelyakov, A. & Valiev, R., 2015, In: Advanced Engineering Materials. 17, 12, p. 1728-1732

    Research output: Contribution to journal › Article

  434. Strength and electrical conductivity of ultrafine-grained aluminum alloy Al-2Fe subjected to annealing and straining

    Medvedev, A. E., Murashkin, M. Y., Enikeev, N. A., Ovid'ko, I. A. & Valiev, R. Z., 2015, In: Materials Physics and Mechanics. 3, p. 297-307

    Research output: Contribution to journal › Article › peer-review

  435. Stress-driven migration of deformation-distorted grain boundaries in nanomaterials

    Bobylev, S. V. & Ovid'Ko, I. A., 2015, In: Acta Materialia. 88, p. 260-270

    Research output: Contribution to journal › Article

  436. Stress-driven migration of low-angle grain boundaries in nanocomposites with incoherent inclusions

    Konakov, Y. V., Ovid'ko, I. A. & Sheinerman, A. G., 2015, In: Materials Physics and Mechanics. 2, p. 97-106

    Research output: Contribution to journal › Article › peer-review

  437. Stress-driven rotations of deformation-distorted grain boundaries in nanocrystalline and ultrafine-grained materials

    Bobylev, S. V. & Ovid'ko, I. A., 2015, In: Reviews on Advanced Materials Science. 41, 1/2, p. 20-34

    Research output: Contribution to journal › Article › peer-review

  438. Study of conditions for the increase of surface hydrophobization of nanostructured titanium with titanium organic nanostructures brush type on the surface

    Zemtsova, E. G., Morozov, P. E., Valiev, R. Z. & Smirnov, V. M., 2015, In: Materials Physics and Mechanics. 24, 2, p. 129-138

    Research output: Contribution to journal › Article › peer-review

  439. Superior mechanical properties of nanostructured light metallic Materials and their innovation potential. Ch.2

    Murashkin, M. Y., Sabirov, I., Enikeev, N. A. & Valiev, R. Z., 2015, Handbook of Mechanical Nanostructuring. Wiley-Blackwell, p. 750 стр., 17-33

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  440. Thermal stability and extra-strength of an ultrafine grained stainless steel produced by high pressure torsion

    Abramova, M. M., Enikeev, N. A., Sauvage, X., Etienne, A., Radiguet, B., Ubyivovk, E. & Valiev, R. Z., 2015, In: Reviews on Advanced Materials Science. 43, 1-2, p. 83-88

    Research output: Contribution to journal › Article › peer-review

  441. Thickening of deformation-distorted high-angle grain boundaries in nanomaterials

    Bobylev, S. V. & Ovid’ko, I. A., 2015, In: Physics of the Solid State. 10, p. 2059-2065

    Research output: Contribution to journal › Article

  442. Toughening due to crack deflection in ceramic- and metal-graphene nanocomposites

    Ovid'Ko, I. A. & Sheinerman, A. G., 2015, In: Reviews on Advanced Materials Science. 1-2, p. 52-60

    Research output: Contribution to journal › Article › peer-review

  443. Transfer of plastic deformation through graphene interfaces in metal-graphene nanocomposites

    Ovid'ko, I. A. & Sheinerman, A. G., 2015, In: Materials Physics and Mechanics. 2, p. 154-162

    Research output: Contribution to journal › Article › peer-review

  444. Twin boundary migration and nanocrack generation in ultrafine-grained materials with nanotwinned structure

    Ovid'Ko, I., Sheinerman, A., Skiba, N., Krasnitiskiy, S. & Smirnov, A., 2015, In: WSEAS Transactions on Applied and Theoretical Mechanics. 10, p. 204-212

    Research output: Contribution to journal › Article

  445. МЕТОДЫ ИЗМЕРЕНИЯ УПРУГИХ МОДУЛЕЙ В TI, ПОЛУЧЕННОМ ИНТЕНСИВНЫМИ ПЛАСТИЧЕСКИМИ ДЕФОРМАЦИЯМИ

    Магомедова, Д. К., 2015, МАТЕМАТИЧЕСКОЕ МОДЕЛИРОВАНИЕ В ЕСТЕСТВЕННЫХ НАУКАХ. p. 253-259

    Research output: Chapter in Book/Report/Conference proceeding › Article in an anthology › Research › peer-review

  446. Современные методы деформационно-термической обработки: от традиционных материалов до наноструктурных: учебное пособие

    Бобрук, Е. В., Семенова, И. П. & Валиев, Р. З., 2015, Уфа: Уфимский государственный авиационный технический университет. 112 p.

    Research output: Book/Report/Anthology › Teaching manual › peer-review

  447. ЭВОЛЮЦИЯ СТРУКТУРЫ И СВОЙСТВ ОБЪЕМНЫХ АМОРФНЫХ СПЛАВОВ, ПОДВЕРГНУТЫХ ИНТЕНСИВНОЙ ПЛАСТИЧЕСКОЙ ДЕФОРМАЦИИ КРУЧЕНИЕМ

    Болтынюк, Е. В., Гундеров, Д. В., Убыйвовк, Е. В., Чуракова, А. А., Чурюмов, А. Ю. & Валиев, Р. З., 2015, МНОГОФУНКЦИОНАЛЬНЫЕ КОНСТРУКЦИОННЫЕ МАТЕРИАЛЫ НОВОГО ПОКОЛЕНИЯ. p. 249-257 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Article in an anthology › Research › peer-review

  448. 2014

  449. СПОСОБ ИСПЫТАНИЯ МЕХАНИЧЕСКИХ СВОЙСТВ КОНСТРУКЦИОННЫХ МАТЕРИАЛОВ В УСЛОВИЯХ УДАРНО-ВОЛНОВОГО НАГРУЖЕНИЯ И УСТРОЙСТВО ДЛЯ ЕГО РЕАЛИЗАЦИИ

    Судьенков, Ю. В. & Смирнов, И. В., 20 Feb 2014, Patent No. 2507498, 1 Aug 2012

    Research output: Patenting and IP registration › Patent

  450. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity

    Valiev, R. Z., Murashkin, M. & Sabirov, I., 2014, In: Scripta Materialia. 76, p. 13-16 4 p.

    Research output: Contribution to journal › Article

  451. Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al-Mg alloy

    Sauvage, X., Enikeev, N., Valiev, R., Nasedkina, Y. & Murashkin, M., 2014, In: Acta Materialia. 72, p. 125-136

    Research output: Contribution to journal › Article

  452. Characteristics of the synthesis of TiO2 films on a titanium surface by the sol-gel technique

    Yu. Arbenin, A., Zemtsova, E. G., Valiev, R. Z. & Smirnov, V. M., 2014, In: Russian Journal of General Chemistry. 84, 12, p. 2453-2454

    Research output: Contribution to journal › Letter › peer-review

  453. Competition between plastic deformation and fracture processes in metal-graphene layered composites

    Ovid'ko, I. A. & Sheinerman, A. G., 2014, In: Journal of Physics D - Applied Physics. 47, 49, p. Article number 495302

    Research output: Contribution to journal › Article

  454. Crack generation initiated by nanoscale ideal shear in crystalline, nanocrystalline and metal-ceramic nanocomposite solids

    Ovid'ko, I. A. & Sheinerman, A. G., 2014, In: Reviews on Advanced Materials Science. 39, 1/2, p. 84-91

    Research output: Contribution to journal › Article › peer-review

  455. Dynamic strength of limestone in terms of the incubation fracture time criterion

    Smirnov, I., Petrov, Y., Volkov, G., Abramian, A., Verichev, S., Bragov, A., Konstantinov, A. & Lamzin, D., 2014, In: Procedia Materials Science. 3, p. 778–783

    Research output: Contribution to journal › Article

  456. Effect of cooperative grain boundary sliding and nanograin nucleation on crack growth in nanocrystalline materials and metal-ceramic nanocomposites

    Ovid'ko, I. A. & Sheinerman, A. G., 2014, In: Reviews on Advanced Materials Science. 39, 1, p. 54-60

    Research output: Contribution to journal › Article › peer-review

  457. Effect of high pressure torsion technical parameters on grain refinement in Ti-6Al-4V alloy

    Valiev, R. R. & Smirnov, I. V., 2014, Effect of high pressure torsion technical parameters on grain refinement in Ti-6Al-4V alloy.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  458. Effect of twin boundary migration on fracture toughness of nano-twinned metals

    Ovid'ko, I. A. & Sheinerman, A. G., 2014, In: Materials Physics and Mechanics. 3, p. 248-258

    Research output: Contribution to journal › Article › peer-review

  459. Equilibrium dislocation structures at grain boundaries in subsurface areas of polycrystalline graphene and ultrafine-grained metals

    Konakov, Y. V., Ovid'ko, I. A. & Sheinerman, A. G., 2014, In: Reviews on Advanced Materials Science. 37, 1/2, p. 83-89

    Research output: Contribution to journal › Article › peer-review

  460. Fatigue life and failure characteristics of an ultrafine-grained Ti-6Al-4V alloy processed by ECAP and extrusion.

    Polyakov, A. V., Semenova, I. P., Huang, Y., Valiev, R. Z. & Langdon, T. G., 2014, In: Advanced Engineering Materials. 16, 8, p. 1038-1043

    Research output: Contribution to journal › Article

  461. Formation of amorphous states in Ti50Ni25Cu 25 alloy subjected to severe plastic deformation: Nanoglass issue

    Slesarenko, V. Y., Gunderov, D. A., Ulyanov, P. G. & Valiev, R. Z., 2014, Formation of amorphous states in Ti50Ni25Cu 25 alloy subjected to severe plastic deformation: Nanoglass issue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  462. Frontiers for Bulk Nanostructured Metals in Biomedical Applications

    Lowe, T. C. & Valiev, R. Z., 2014, Advanced Biomaterials and Biodevices. Wiley-Blackwell, p. 1-52

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  463. Functional properties of 'Ti50Ni50-Ti49.3Ni50.7' shape memory composite produced by explosion welding

    Belyaev, S., Rubanik, V., Resnina, N. & Lomakin, I., 2014, In: Smart Materials and Structures. 23, 8, p. 1-8

    Research output: Contribution to journal › Article

  464. Grain boundary mechanisms of misfit stress relaxation in nanocrystalline films and coatings

    Skiba, N. V., 2014, In: Materials Physics and Mechanics. 1, p. 68-87

    Research output: Contribution to journal › Article › peer-review

  465. Grain boundary phenomena in an ultrafine-grained Al-Zn alloy with improved mechanical behavior for micro-devices

    Chinh, N. Q., Valiev, R. Z., Sauvage, X., Varga, G., Havancsák, K., Kawasaki, M., Straumal, B. B. & Langdon, T. G., 2014, In: Advanced Engineering Materials. 8, p. 1000-1009

    Research output: Contribution to journal › Article

  466. Grain boundary rotations near crack tips in deformed nanomaterials

    Ovid'ko, I. A. & Sheinerman, A. G., 2014, In: Reviews on Advanced Materials Science. 37, 1/2, p. 97-104

    Research output: Contribution to journal › Article › peer-review

  467. Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel

    Abramova, M. M., Enikeev, N. A., Valiev, R. Z., Etienne, A., Radiguet, B., Ivanisenko, Y. & Sauvage, X., 2014, In: Materials Letters. 136, p. 349-352

    Research output: Contribution to journal › Article

  468. High fatigue strength and enhanced biocompatibility of UFG CP Ti for medical innovative applications

    Polyakov, A. V., Semenova, I. P. & Valiev, R. Z., 2014, In: IOP Conference Series: Materials Science and Engineering. 63, 1, 7 p., 012113.

    Research output: Contribution to journal › Conference article › peer-review

  469. High strength state of UFG steel produced by severe plastic deformation

    Enikeev, N. A., Sauvage, X., Abramova, M. M., Murashkin, M. Y. & Valiev, R. Z., 2014, High strength state of UFG steel produced by severe plastic deformation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  470. Influence of UFG structure formation on mechanical and fatigue properties in Ti-6Al-7Nb alloy

    Polyakova, V. V., Anumalasetty, V. N., Semenova, I. P. & Valiev, R. Z., 2014, Influence of UFG structure formation on mechanical and fatigue properties in Ti-6Al-7Nb alloy.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  471. Investigation of high-speed loading effects on the properties of ferromagnetic alloys processed in an external magnetic field

    Sudenkov, Y. V., Atroshenko, S., Smirnov, I., Naumova, N. & Sun, X. Y., 2014, In: Applied Mechanics and Materials. 566, p. 542-547 6 p.

    Research output: Contribution to journal › Article › peer-review

  472. Irradiation resistance of a nanostructured 316 austenitic stainless steel

    Rajan, P. B. R., Monnet, I., Hug, E., Etienne, A., Enikeev, N., Keller, C., Sauvage, X., Valiev, R. & Radiguet, B., 2014, In: IOP Conference Series: Materials Science and Engineering. 63, 1, 012121.

    Research output: Contribution to journal › Article › peer-review

  473. Mg segregations at and near deformation-distorted grain boundaries in ultrafine-grained Al-Mg alloys

    Ovid'Ko, I. A., Sheinerman, A. G. & Valiev, R. Z., 2014, Mg segregations at and near deformation-distorted grain boundaries in ultrafine-grained Al-Mg alloys. p. 6682-6688

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research

  474. Microstructure and mechanical properties of continuous equal channel angular pressed Titanium

    Dyakonov, G. S., Gu, C. F., Toth, L. S., Valiev, R. Z. & Semenova, I. P., 2014, Microstructure and mechanical properties of continuous equal channel angular pressed Titanium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  475. Microstructure features and mechanical properties of a UFG Al-Mg-Si alloy produced via SPD

    Bobruk, E., Sabirov, I., Kazykhanov, V., Valiev, R. & Murashkin, M., 2014, Microstructure features and mechanical properties of a UFG Al-Mg-Si alloy produced via SPD.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  476. Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation

    Karavaeva, M. V., Kiseleva, S. K., Abramova, M. M., Ganeev, A. V. & Valiev, R. Z., 2014, Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  477. Nanocrack generation due to stress-driven widening of twins in nanotwinned metals

    Ovid'ko, I. A. & Sheinerman, A. G., 2014, In: Reviews on Advanced Materials Science. 39, 1, p. 9-14

    Research output: Contribution to journal › Article › peer-review

  478. Nanodisturbance deformation mode in FCC nanowires, micropillars and bulk nanocomposites

    Bobylev, S. V. & Ovid'ko, I. A., 2014, In: Reviews on Advanced Materials Science. 37, 1/2, p. 90-96

    Research output: Contribution to journal › Article › peer-review

  479. Nanoscale cracks at deformation twins stopped by grain boundaries in bulk and thin-film materials with nanocrystalline and ultrafine-grained structures

    Ovid'Ko, I. A. & Sheinerman, A. G., 2014, In: Journal of Physics D - Applied Physics. 47, 1, p. 015307

    Research output: Contribution to journal › Article

  480. Nanostructured Cu-Cr alloy with high strength and electrical conductivity.

    Islamgaliev, R. K., Nesterov, K. M., Bourgon, J., Champion, Y. & Valiev, R. Z., 2014, In: Journal of Applied Physics. 115, 19, p. 194301

    Research output: Contribution to journal › Article

  481. Nanostructured titanium-based materials for medical implants: Modeling and development.

    Mishnaevsky, J. L., Levashov, E., Prokoshkin, S., Korotitskiy, A., Valiev, R. Z., Enikeev, N., Segurado, J., Sabirov, I., Solov'yov, A. V., Gutmanas, E., Gotman, I., Rabkin, E., Psakh'e, S., Smolin, A., Dluho, L. & Seefeldt, M., 2014, In: Materials Science and Engineering: R: Reports. 1, p. 1-19

    Research output: Contribution to journal › Article

  482. Nanotwins induced by grain boundary deformation processes in nanomaterials

    Ovid'Ko, I. A. & Skiba, N. V., 2014, In: Scripta Materialia. 71, 1, p. 33-36

    Research output: Contribution to journal › Article

  483. On the nature of high-strength state of carbon steel produced by severe plastic deformation

    Ganeev, A. V., Karavaeva, M. V., Sauvage, X., Courtois-Manara, E., Ivanisenko, Y. & Valiev, R. Z., 2014, On the nature of high-strength state of carbon steel produced by severe plastic deformation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  484. Physical Simulation of Hot Rolling of Ultra-fine Grained Pure Titanium

    Polyakov, A., Gunderov, D., Sitdikov, V. ., Valiev, R., Semenova, I. & Sabirov, I., 2014, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45, 6, p. 2315-2326

    Research output: Contribution to journal › Article

  485. Plastic flow through widening of nanoscale twins in ultrafine-grained metallic materials with nanotwinned structures

    Morozov, N. F., Ovid'ko, I. A. & Skiba, N. V., 2014, In: Reviews on Advanced Materials Science. 37, 1/2, p. 29-36

    Research output: Contribution to journal › Article › peer-review

  486. Processes of Disperse-Phase Nanostructuring in Subsurface Areas of Composite Ceramic Materials - the Current State of Research (a Brief Review)

    Zemtsova, E. G., Monin, A. V., Smirnov, V. M. & Valiev, R. Z., 2014, In: Reviews on Advanced Materials Science. 38, p. 176-180

    Research output: Contribution to journal › Literature review › peer-review

  487. Refinement of tungsten microstructure upon severe plastic deformation.

    Ganeev, A. V., Islamgaliev, R. K. & Valiev, R. Z., 2014, In: Physics of Metals and Metallography. 115, 2, p. 139-145

    Research output: Contribution to journal › Article › peer-review

  488. Regulation of the surface microrelief of coarse-grained and ultrafine-grained titanium by etching method

    D'jkonov, G. S., Stenina, E. V., Sviridova, E. V., Salimgareeva, G. C., Semenova, I. P., Zemtsova, E. G. & Valiev, R. Z., 2014, In: Materials Physics and Mechanics. 21, 3, p. 259-265

    Research output: Contribution to journal › Article › peer-review

  489. Report of International NanoSPD Steering Committee and statistics on recent NanoSPD activities

    Valiev, R. Z. & Langdon, T. G., 2014, Report of International NanoSPD Steering Committee and statistics on recent NanoSPD activities.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  490. Strength, grain refinement and solute nanostructures of an Al-Mg-Si alloy (AA6060) processed by high-pressure torsion

    Sha, G., Tugcu, K., Liao, X. Z., Trimby, P. W., Murashkin, M. Y., Valiev, R. Z. & Ringer, S. P., 2014, In: Acta Materialia. 63, p. 169-179

    Research output: Contribution to journal › Article

  491. Stress-driven migration of low-angle tilt boundaries in nanocrystalline and ultrafine-grained metals containing coherent nanoinclusions

    Ovid'ko, I. A. & Sheinerman, A. G., 2014, In: Reviews on Advanced Materials Science. 39, 1/2, p. 99-107

    Research output: Contribution to journal › Article › peer-review

  492. Structural strength and corrosion resistance of nanostructured steel 10

    Valiev, R. Z., Klevtsov, G. V., Klevtsova, N. A., Kushnarenko, V. M. & Ganeev, A. V., 2014, In: Steel in Translation. 44, 6, p. 418-421

    Research output: Contribution to journal › Article

  493. Superior strength in ultrafine-grained materials produced by SPD processing.

    Valiev, R. Z., 2014, In: Materials Transactions. 55, 1, p. 13-18

    Research output: Contribution to journal › Literature review

  494. Ultra-fine grained Al-Mg alloys with superior strength via physical simulation

    Sabirov, I., Enikeev, N., Kazykhanov, V., Valiev, R. & Murashkin, M., 2014, Ultra-fine grained Al-Mg alloys with superior strength via physical simulation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  495. Ultrafine-grained Ti-Nb-Ta-Zr alloy produced by ECAP at room temperature

    Li, Z., Zheng, B., Wang, Y., Topping, T., Zhou, Y., Valiev, R. Z., Shan, A. & Lavernia, E. J., 2014, Ultrafine-grained Ti-Nb-Ta-Zr alloy produced by ECAP at room temperature. p. 6656-6666

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research

  496. Variation in kinetics of martensitic transformation during partial thermal cycling of the TiNi alloy

    Belyaev, S., Resnina, N., Sibirev, A. & Lomakin, I., 2014, In: Thermochimica Acta. 582, p. 46-52

    Research output: Contribution to journal › Article

  497. X-ray studies of aluminum alloy of the Al-Mg-Si system subjected to SPD processing

    Sitdikov, V. D., Murashkin, M. Y., Khasanov, M. R., Kasatkin, I. A., Chizhov, P. S. & Bobruk, E. V., 2014. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  498. Влияние миграции двойниковых границ на трещиностойкость нанодвойникованных металлов

    Овидько, И. А. & Шейнерман, А. Г., 2014, In: Materials Physics and Mechanics. 21, 3, p. 248-258

    Research output: Contribution to journal › Article › peer-review

  499. Исследование динамических свойств магнитотвердого сплава системы Fe-Cr-Co

    Атрошенко, С. А., Судьенков, Ю. В., Sun, X-Y., Морозов, Н. Ф., Смирнов, И. В. & Наумова, Н. С., 2014, In: ДЕФОРМАЦИЯ И РАЗРУШЕНИЕ МАТЕРИАЛОВ. 8, p. 2-8

    Research output: Contribution to journal › Article

  500. Метод исследования разрушения конструкционных материалов во встречных вонах растяжения

    Судьенков, Ю. В., Смирнов, И. В. & Зимин, Б. А., 2014, Деформирование и разрушение материалов с дефектами и динамические явления в горных породах и выработках: Материалы XXIV Международной научной школы им. академика С.А. Христиановича. Крымский федеральный университет имени В. И. Вернадского, p. 283

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research

  501. Экспериментально-теоретическое исследование динамического деформирования и разрушения фибробетона

    Брагов, А. М., Карихалу, Б. Л., Петров, Ю. В., Ломунов, А. К., Константинов, А. Ю., Ламзин, Д. А. & Смирнов, И. В., 2014, In: ЗАВОДСКАЯ ЛАБОРАТОРИЯ. ДИАГНОСТИКА МАТЕРИАЛОВ. 80, 4, p. 57-63

    Research output: Contribution to journal › Article

  502. 2013

  503. Optimal upper-pool regulation assuring normal technical condition of dam at Sayano-Shushenskaya HPP

    Bellendir, E. N., Khrapkov, A. A., Skvortsova, A. E. & Evstifeev, A. D., 31 Oct 2013, Power Technology and Engineering, 47, 3, p. 186-190 5 p.

    Research output: Contribution to specialist publication › Article › Education

  504. An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing

    Jorge, A. M., Prokofiev, E., Ferreira De Lima, G., Rauch, E., Veron, M., Botta, W. J., Kawasaki, M. & Langdon, T. G., 9 Jul 2013, In: International Journal of Hydrogen Energy. 38, 20, p. 8306-8312 7 p.

    Research output: Contribution to journal › Article › peer-review

  505. Service properties of ultrafine-grained Ti-6Al-4V alloy at elevated temperature

    Semenova, I. P., Raab, G. I., Golubovskiy, E. R. & Valiev, R. R., 1 Jul 2013, In: Journal of Materials Science. 48, 13, p. 4806-4812 7 p.

    Research output: Contribution to journal › Article › peer-review

  506. Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing

    Gunderov, D. V., Polyakov, A. V., Semenova, I. P., Raab, G. I., Churakova, A. A., Gimaltdinova, E. I., Sabirov, I., Segurado, J., Sitdikov, V. D., Alexandrov, I. V., Enikeev, N. A. & Valiev, R. Z., 1 Feb 2013, In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 562, p. 128-136 9 p.

    Research output: Contribution to journal › Article › peer-review

  507. Experimental-theoretical investigation of fiber reinforced concrete under dynamic loading

    Bragov, A. M., Petrov, Y. V., Karihaloo, B. L., Konstantinov, A. Y., Lamzin, D. A., Lomunov, A. K. & Smirnov, I. V., 1 Jan 2013, fib Symposium TEL-AVIV 2013: Engineering a Concrete Future: Technology, Modeling and Construction, Proceedings. Dancygier, A. N. (ed.). Technion - lsrael lnstitute of Technology, p. 633-636 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

  508. Contact-Free Micropipe Reactions in Silicon Carbide

    Sheinerman, A. G., Gutkin, M. Y., Argunova, T. S., Mokhov, E. N., Nagalyuk, S. N. & Je, J. H., 2013, Contact-Free Micropipe Reactions in Silicon Carbide. p. 597-600

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research

  509. Crack Propagation in PMMA Plates under Various Loading Conditions

    Smirnov, I. & Sudenkov, Y., 2013, Proceeding of 13th International Conference on Fracture. Curran Associates, Inc. , p. 2696-2705

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research

  510. Cracks at disclinated grain boundaries in graphene

    Ovid'Ko, I. A. & Sheinerman, A. G., 2013, In: Journal of Physics D - Applied Physics. 46, 34, p. Article No. 345305

    Research output: Contribution to journal › Article

  511. Dynamic strengths and toughness of an ultra high performance fibre reinforced concrete

    Bragov, A. M., Petrov, Y. V., Karihaloo, B. L., Konstantinov, A. Y., Lamzin, D. A., Lomunov, A. K. & Smirnov, I. V., 2013, In: Engineering Fracture Mechanics. 110, p. 477-488

    Research output: Contribution to journal › Article

  512. Enhanced mechanical properties and electrical conductivity in ultra-fine grained Al alloy processed via ECAP-PC

    Murashkin, M., Sabirov, I., Kazykhanov, V., Bobruk, E., Dubravina, A. & Valiev, R. Z., 2013

    Research output: Other contribution › Research

  513. Formation of nanoscopic grains due to dislocation pile-up transformations in deformed ultrafine-grained materials

    Ovid'ko, I. A. & Skiba, N. V., 2013, In: Reviews on Advanced Materials Science. 35, 1/2, p. 96-103

    Research output: Contribution to journal › Article › peer-review

Previous 1 2 Next

ID: 30105