Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications

Standard

Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications. / Karna, Pravin; Prabu, S. S.Mani; Karthikeyan, S. C.; Mithun, R.; Jayachandran, S.; Resnina, N.; Belyaev, S.; Palani, I. A.

в: Sensors and Actuators, A: Physical, Том 321, 112411, 15.04.2021.

Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование

Author

Karna, Pravin ; Prabu, S. S.Mani ; Karthikeyan, S. C. ; Mithun, R. ; Jayachandran, S. ; Resnina, N. ; Belyaev, S. ; Palani, I. A. / Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications. в: Sensors and Actuators, A: Physical. 2021 ; Том 321.

BibTeX

@article{552817e120ba4441af8feed09102dad2,

title = "Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications",

abstract = "A laser source was used as non-contact mode of heating to actuate NiTi/kapton polyimide shape memory alloy (SMA) bimorph. The bimorph was fabricated by depositing NiTi thin film over Kapton polyimide sheet of dimension 5 × 2 cm2 using thermal evaporation. The laser parameters such as laser power, scanning speed and number of passes were optimized to ensure actuation without damaging the bimorph. The actuation was carried out at laser powers and scanning speeds of 14 to 16 W and 13–16 mm/s respectively. The displacement of SMA bimorph was found to increase with increase in laser power whereas it decreases with increase in scanning speeds. At lower laser power, the scanning speeds have influenced the actuation behavior to larger extent. Notably at the laser power of 14 W, the influence of scanning speed was significant and registered 53 % reduction in displacement with increase in scanning speeds from 13 mm/s to 16 mm/s. A minimum and maximum displacement of 0.35 mm and 3.8 mm was obtained during laser actuation of bimorph. The temperature experienced during laser actuation has been simulated using COMSOL Multiphysics and corroborated with the actuation behavior of the SMA bimorph. The displacement range and the actuation speed of laser actuation were found to be higher than the conventional electrical actuation. Furthermore, the life cycle analysis has been performed up to 100 laser passes and the phenomenon for reduction in displacement has been discussed in detail. Laser actuation of SMA bimorph could be utilized in thermal switches, adaptive optics and remote actuation of SMA elements etc.",

keywords = "Laser actuation, NiTi bimorph, Scanning technique, Shape memory alloy",

author = "Pravin Karna and Prabu, {S. S.Mani} and Karthikeyan, {S. C.} and R. Mithun and S. Jayachandran and N. Resnina and S. Belyaev and Palani, {I. A.}",

note = "Funding Information: The authors gratefully acknowledge the SIC, IIT Indore for providing the characterization facilities. Authors S. S. Mani Prabu and S. Jayachandran are thankful to DST:RSF project ( #DST/INT/RUS/RSF/P-36 , #RSF19-49-02014 ) for the research fellowship. Publisher Copyright: {\textcopyright} 2020 Elsevier B.V. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.",

year = "2021",

month = apr,

day = "15",

doi = "10.1016/j.sna.2020.112411",

language = "English",

volume = "321",

journal = "Sensors and Actuators, A: Physical",

issn = "0924-4247",

publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Investigations on laser actuation and life cycle characteristics of NiTi shape memory alloy bimorph for non-contact functional applications

AU - Karna, Pravin

AU - Prabu, S. S.Mani

AU - Karthikeyan, S. C.

AU - Mithun, R.

AU - Jayachandran, S.

AU - Resnina, N.

AU - Belyaev, S.

AU - Palani, I. A.

N1 - Funding Information: The authors gratefully acknowledge the SIC, IIT Indore for providing the characterization facilities. Authors S. S. Mani Prabu and S. Jayachandran are thankful to DST:RSF project ( #DST/INT/RUS/RSF/P-36 , #RSF19-49-02014 ) for the research fellowship. Publisher Copyright: © 2020 Elsevier B.V. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.

PY - 2021/4/15

Y1 - 2021/4/15

N2 - A laser source was used as non-contact mode of heating to actuate NiTi/kapton polyimide shape memory alloy (SMA) bimorph. The bimorph was fabricated by depositing NiTi thin film over Kapton polyimide sheet of dimension 5 × 2 cm2 using thermal evaporation. The laser parameters such as laser power, scanning speed and number of passes were optimized to ensure actuation without damaging the bimorph. The actuation was carried out at laser powers and scanning speeds of 14 to 16 W and 13–16 mm/s respectively. The displacement of SMA bimorph was found to increase with increase in laser power whereas it decreases with increase in scanning speeds. At lower laser power, the scanning speeds have influenced the actuation behavior to larger extent. Notably at the laser power of 14 W, the influence of scanning speed was significant and registered 53 % reduction in displacement with increase in scanning speeds from 13 mm/s to 16 mm/s. A minimum and maximum displacement of 0.35 mm and 3.8 mm was obtained during laser actuation of bimorph. The temperature experienced during laser actuation has been simulated using COMSOL Multiphysics and corroborated with the actuation behavior of the SMA bimorph. The displacement range and the actuation speed of laser actuation were found to be higher than the conventional electrical actuation. Furthermore, the life cycle analysis has been performed up to 100 laser passes and the phenomenon for reduction in displacement has been discussed in detail. Laser actuation of SMA bimorph could be utilized in thermal switches, adaptive optics and remote actuation of SMA elements etc.

AB - A laser source was used as non-contact mode of heating to actuate NiTi/kapton polyimide shape memory alloy (SMA) bimorph. The bimorph was fabricated by depositing NiTi thin film over Kapton polyimide sheet of dimension 5 × 2 cm2 using thermal evaporation. The laser parameters such as laser power, scanning speed and number of passes were optimized to ensure actuation without damaging the bimorph. The actuation was carried out at laser powers and scanning speeds of 14 to 16 W and 13–16 mm/s respectively. The displacement of SMA bimorph was found to increase with increase in laser power whereas it decreases with increase in scanning speeds. At lower laser power, the scanning speeds have influenced the actuation behavior to larger extent. Notably at the laser power of 14 W, the influence of scanning speed was significant and registered 53 % reduction in displacement with increase in scanning speeds from 13 mm/s to 16 mm/s. A minimum and maximum displacement of 0.35 mm and 3.8 mm was obtained during laser actuation of bimorph. The temperature experienced during laser actuation has been simulated using COMSOL Multiphysics and corroborated with the actuation behavior of the SMA bimorph. The displacement range and the actuation speed of laser actuation were found to be higher than the conventional electrical actuation. Furthermore, the life cycle analysis has been performed up to 100 laser passes and the phenomenon for reduction in displacement has been discussed in detail. Laser actuation of SMA bimorph could be utilized in thermal switches, adaptive optics and remote actuation of SMA elements etc.

KW - Laser actuation

KW - NiTi bimorph

KW - Scanning technique

KW - Shape memory alloy

UR - http://www.scopus.com/inward/record.url?scp=85097163137&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/1d82467b-4dca-361f-823f-88ccc976fd03/

U2 - 10.1016/j.sna.2020.112411

DO - 10.1016/j.sna.2020.112411

M3 - Article

AN - SCOPUS:85097163137

VL - 321

JO - Sensors and Actuators, A: Physical

JF - Sensors and Actuators, A: Physical

SN - 0924-4247

M1 - 112411

ER -

ID: 71817954