Standard

Three-component deep eutectic solvent-based microextraction approach for biodiesel quality control: Determination of water and metals. / Shishov, Andrey; Melesova, Maria; Bulatov, Andrey.

в: Analytica Chimica Acta, Том 1277, 341658, 09.10.2023.

Результаты исследований: Научные публикации в периодических изданияхстатья

Harvard

APA

Vancouver

Author

BibTeX

@article{e817e969b8834a01bec3a62fd2d21709,
title = "Three-component deep eutectic solvent-based microextraction approach for biodiesel quality control: Determination of water and metals",
abstract = "Biodiesel is an important alternative fuel produced by blending biofuels with petroleum diesel. Biofuel production is usually carried out by catalytic interesterification of animal fats or vegetable oils, followed by the removal of by-products and catalysts through washing with water. Residual amounts of water and catalysts can accelerate fuel biodegradation and contribute to the corrosion of metal surfaces. Considering the need to control the quality of biodiesel fuel, a simple and environmentally friendly analytical approach was first developed for the determination of water and metals (sodium, potassium, magnesium, calcium as catalysts, and iron, copper, tin, zinc, lead as feedstock elements) using a deep eutectic solvent. The technique involved microextraction of analytes from biodiesel into a new three-component deep eutectic solvent (choline chloride, lactic acid, and cobalt chloride) using a laboratory vortex, followed by impregnating the filter paper with the obtained extract to determine the analytes. The colorimetric determination of water is based on a change in the color of the deep eutectic solvent, which goes from blue to pink due to the formation of cobalt aqua complexes. The detection of water on the filter paper was carried out using a conventional scanner. The content of metals on the filter paper was determined by X-ray fluorescence spectrometry. Under optimal conditions, the detection limit was 100 mg kg−1 for water and 0.03–3 mg kg−1 for metals. The technique enabled multicomponent analysis to be carried out without the use of dangerous Karl Fischer reagents (for water determination) and microwave mineralization of samples (for elemental analysis). The enrichment factor ranged from 290 to 330, and the RSD was less than 15%.",
keywords = "Biodiesel fuel, Catalysts, Colorimetry, Deep eutectic solvent, Metals, Microextraction, Water, XRF analysis",
author = "Andrey Shishov and Maria Melesova and Andrey Bulatov",
year = "2023",
month = oct,
day = "9",
doi = "10.1016/j.aca.2023.341658",
language = "English",
volume = "1277",
journal = "Analytica Chimica Acta",
issn = "0003-2670",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Three-component deep eutectic solvent-based microextraction approach for biodiesel quality control: Determination of water and metals

AU - Shishov, Andrey

AU - Melesova, Maria

AU - Bulatov, Andrey

PY - 2023/10/9

Y1 - 2023/10/9

N2 - Biodiesel is an important alternative fuel produced by blending biofuels with petroleum diesel. Biofuel production is usually carried out by catalytic interesterification of animal fats or vegetable oils, followed by the removal of by-products and catalysts through washing with water. Residual amounts of water and catalysts can accelerate fuel biodegradation and contribute to the corrosion of metal surfaces. Considering the need to control the quality of biodiesel fuel, a simple and environmentally friendly analytical approach was first developed for the determination of water and metals (sodium, potassium, magnesium, calcium as catalysts, and iron, copper, tin, zinc, lead as feedstock elements) using a deep eutectic solvent. The technique involved microextraction of analytes from biodiesel into a new three-component deep eutectic solvent (choline chloride, lactic acid, and cobalt chloride) using a laboratory vortex, followed by impregnating the filter paper with the obtained extract to determine the analytes. The colorimetric determination of water is based on a change in the color of the deep eutectic solvent, which goes from blue to pink due to the formation of cobalt aqua complexes. The detection of water on the filter paper was carried out using a conventional scanner. The content of metals on the filter paper was determined by X-ray fluorescence spectrometry. Under optimal conditions, the detection limit was 100 mg kg−1 for water and 0.03–3 mg kg−1 for metals. The technique enabled multicomponent analysis to be carried out without the use of dangerous Karl Fischer reagents (for water determination) and microwave mineralization of samples (for elemental analysis). The enrichment factor ranged from 290 to 330, and the RSD was less than 15%.

AB - Biodiesel is an important alternative fuel produced by blending biofuels with petroleum diesel. Biofuel production is usually carried out by catalytic interesterification of animal fats or vegetable oils, followed by the removal of by-products and catalysts through washing with water. Residual amounts of water and catalysts can accelerate fuel biodegradation and contribute to the corrosion of metal surfaces. Considering the need to control the quality of biodiesel fuel, a simple and environmentally friendly analytical approach was first developed for the determination of water and metals (sodium, potassium, magnesium, calcium as catalysts, and iron, copper, tin, zinc, lead as feedstock elements) using a deep eutectic solvent. The technique involved microextraction of analytes from biodiesel into a new three-component deep eutectic solvent (choline chloride, lactic acid, and cobalt chloride) using a laboratory vortex, followed by impregnating the filter paper with the obtained extract to determine the analytes. The colorimetric determination of water is based on a change in the color of the deep eutectic solvent, which goes from blue to pink due to the formation of cobalt aqua complexes. The detection of water on the filter paper was carried out using a conventional scanner. The content of metals on the filter paper was determined by X-ray fluorescence spectrometry. Under optimal conditions, the detection limit was 100 mg kg−1 for water and 0.03–3 mg kg−1 for metals. The technique enabled multicomponent analysis to be carried out without the use of dangerous Karl Fischer reagents (for water determination) and microwave mineralization of samples (for elemental analysis). The enrichment factor ranged from 290 to 330, and the RSD was less than 15%.

KW - Biodiesel fuel

KW - Catalysts

KW - Colorimetry

KW - Deep eutectic solvent

KW - Metals

KW - Microextraction

KW - Water

KW - XRF analysis

UR - https://www.mendeley.com/catalogue/f0c41aa3-6a26-34e6-bff1-a0ed414a3680/

U2 - 10.1016/j.aca.2023.341658

DO - 10.1016/j.aca.2023.341658

M3 - Article

VL - 1277

JO - Analytica Chimica Acta

JF - Analytica Chimica Acta

SN - 0003-2670

M1 - 341658

ER -

ID: 108360282