The effect of substrate and arc voltage on the structure and functional behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing

Standard

The effect of substrate and arc voltage on the structure and functional behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing. / Ponikarova, I.; Palani, I. A.; Liulchak, P.; Resnina, N.; Singh, S.; Belyaev, S.; Mani Prabu, S. S.; Jayachandran, S.; Kalganov, V.; Sahu, Anshu; Bikbaev, R.; Karaseva, U.

в: Journal of Manufacturing Processes, Том 70, 01.10.2021, стр. 132-139.

Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование

Author

Ponikarova, I. ; Palani, I. A. ; Liulchak, P. ; Resnina, N. ; Singh, S. ; Belyaev, S. ; Mani Prabu, S. S. ; Jayachandran, S. ; Kalganov, V. ; Sahu, Anshu ; Bikbaev, R. ; Karaseva, U. / The effect of substrate and arc voltage on the structure and functional behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing. в: Journal of Manufacturing Processes. 2021 ; Том 70. стр. 132-139.

BibTeX

@article{86467bd12676408bb80a8418f28ff6d6,

title = "The effect of substrate and arc voltage on the structure and functional behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing",

abstract = "This paper aimed to study the influence of the substrate and the arc voltage on the structure and functional properties of the NiTi shape memory alloy produced by wire arc additive manufacturing (WAAM). The gas metal arc based WAAM process was used for the deposition of 3-layered NiTi walls on a titanium or steel substrate at different arc voltages using a Ni50.9Ti49.1 wire. It was found that in the sample deposited on the Ti substrate, the Ti2Ni phase appeared and the Ti concentration in the NiTi phase increased to 50.5 at.%. An increase in the arc voltage influenced the volume fraction of Ti2Ni precipitates in the 1st layer but hardly affected the chemical composition of the NiTi phase in all layers as a result, the martensitic transformation temperatures do not depend on the arc voltage. Therefore, the deposition of the Ni-rich NiTi wire on a Ti substrate allowed for the production of the Ti-rich NiTi walls undergoing the martensitic transformation and demonstrated the shape memory behaviour at high temperatures. An increase in the arc voltage hardly affected the shape memory behaviour but decreased the strain up to failure due to an increase in the volume fraction of the brittle Ti2Ni phase, which in turn facilitated the formation of cracks during deformation. In the sample deposited on the steel substrate, the NiTiFe solid solution and Ti-C, Ni3Ti4, and Ni3Ti2 precipitates formed in the 1st layer. An increase in the arc voltage led to an increase in the Fe concentration in the NiTiFe solid solution from 17 at.% to 42 at.% in the 1st layer. From layer to layer, the Fe concentration decreased; however, it remained larger than 1.5 at.% and completely suppressed the martensitic transformation and the shape memory effects in the NiTi sample deposited on the steel substrate.",

keywords = "Additive manufacturing, Martensitic transformation, Shape memory alloy, Shape memory effect, Wire arc additive manufacturing, COMPONENTS, FEED",

author = "I. Ponikarova and Palani, {I. A.} and P. Liulchak and N. Resnina and S. Singh and S. Belyaev and {Mani Prabu}, {S. S.} and S. Jayachandran and V. Kalganov and Anshu Sahu and R. Bikbaev and U. Karaseva",

note = "Publisher Copyright: {\textcopyright} 2021 The Society of Manufacturing Engineers",

year = "2021",

month = oct,

day = "1",

doi = "10.1016/j.jmapro.2021.08.026",

language = "English",

volume = "70",

pages = "132--139",

journal = "Journal of Manufacturing Processes",

issn = "1526-6125",

publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - The effect of substrate and arc voltage on the structure and functional behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing

AU - Ponikarova, I.

AU - Palani, I. A.

AU - Liulchak, P.

AU - Resnina, N.

AU - Singh, S.

AU - Belyaev, S.

AU - Mani Prabu, S. S.

AU - Jayachandran, S.

AU - Kalganov, V.

AU - Sahu, Anshu

AU - Bikbaev, R.

AU - Karaseva, U.

PY - 2021/10/1

Y1 - 2021/10/1

N2 - This paper aimed to study the influence of the substrate and the arc voltage on the structure and functional properties of the NiTi shape memory alloy produced by wire arc additive manufacturing (WAAM). The gas metal arc based WAAM process was used for the deposition of 3-layered NiTi walls on a titanium or steel substrate at different arc voltages using a Ni50.9Ti49.1 wire. It was found that in the sample deposited on the Ti substrate, the Ti2Ni phase appeared and the Ti concentration in the NiTi phase increased to 50.5 at.%. An increase in the arc voltage influenced the volume fraction of Ti2Ni precipitates in the 1st layer but hardly affected the chemical composition of the NiTi phase in all layers as a result, the martensitic transformation temperatures do not depend on the arc voltage. Therefore, the deposition of the Ni-rich NiTi wire on a Ti substrate allowed for the production of the Ti-rich NiTi walls undergoing the martensitic transformation and demonstrated the shape memory behaviour at high temperatures. An increase in the arc voltage hardly affected the shape memory behaviour but decreased the strain up to failure due to an increase in the volume fraction of the brittle Ti2Ni phase, which in turn facilitated the formation of cracks during deformation. In the sample deposited on the steel substrate, the NiTiFe solid solution and Ti-C, Ni3Ti4, and Ni3Ti2 precipitates formed in the 1st layer. An increase in the arc voltage led to an increase in the Fe concentration in the NiTiFe solid solution from 17 at.% to 42 at.% in the 1st layer. From layer to layer, the Fe concentration decreased; however, it remained larger than 1.5 at.% and completely suppressed the martensitic transformation and the shape memory effects in the NiTi sample deposited on the steel substrate.

AB - This paper aimed to study the influence of the substrate and the arc voltage on the structure and functional properties of the NiTi shape memory alloy produced by wire arc additive manufacturing (WAAM). The gas metal arc based WAAM process was used for the deposition of 3-layered NiTi walls on a titanium or steel substrate at different arc voltages using a Ni50.9Ti49.1 wire. It was found that in the sample deposited on the Ti substrate, the Ti2Ni phase appeared and the Ti concentration in the NiTi phase increased to 50.5 at.%. An increase in the arc voltage influenced the volume fraction of Ti2Ni precipitates in the 1st layer but hardly affected the chemical composition of the NiTi phase in all layers as a result, the martensitic transformation temperatures do not depend on the arc voltage. Therefore, the deposition of the Ni-rich NiTi wire on a Ti substrate allowed for the production of the Ti-rich NiTi walls undergoing the martensitic transformation and demonstrated the shape memory behaviour at high temperatures. An increase in the arc voltage hardly affected the shape memory behaviour but decreased the strain up to failure due to an increase in the volume fraction of the brittle Ti2Ni phase, which in turn facilitated the formation of cracks during deformation. In the sample deposited on the steel substrate, the NiTiFe solid solution and Ti-C, Ni3Ti4, and Ni3Ti2 precipitates formed in the 1st layer. An increase in the arc voltage led to an increase in the Fe concentration in the NiTiFe solid solution from 17 at.% to 42 at.% in the 1st layer. From layer to layer, the Fe concentration decreased; however, it remained larger than 1.5 at.% and completely suppressed the martensitic transformation and the shape memory effects in the NiTi sample deposited on the steel substrate.

KW - Additive manufacturing

KW - Martensitic transformation

KW - Shape memory alloy

KW - Shape memory effect

KW - Wire arc additive manufacturing

KW - COMPONENTS

KW - FEED

UR - http://www.scopus.com/inward/record.url?scp=85113927109&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/0d5680f2-904f-3e32-9fee-baf522802f6e/

U2 - 10.1016/j.jmapro.2021.08.026

DO - 10.1016/j.jmapro.2021.08.026

M3 - Article

AN - SCOPUS:85113927109

VL - 70

SP - 132

EP - 139

JO - Journal of Manufacturing Processes

JF - Journal of Manufacturing Processes

SN - 1526-6125

ER -

ID: 86201228