The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of Composite from 5056 and 1580 Aluminum Alloys Produced with Wire Arc Additive Manufacturing

Standard

The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of Composite from 5056 and 1580 Aluminum Alloys Produced with Wire Arc Additive Manufacturing. / Mavlyutov, Aydar ; Evstifeev, Alexey ; Volosevich, Darya ; Гущина, Марина Олеговна; Voropaev, Artem ; Zotov, Oleg ; Klimova-Korsmik, Olga .

в: Metals, Том 13, № 7, 1281, 17.07.2023.

Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование

BibTeX

@article{7efc8c2f46624929b7c816feea447ef3,

title = "The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of Composite from 5056 and 1580 Aluminum Alloys Produced with Wire Arc Additive Manufacturing",

abstract = "In this study, a composite with alternate layers of 5056 and 1580 alloys was manufactured with wire arc additive manufacturing technology. It is shown that increased strength characteristics of composite material can be obtained with deformation treatment using a high-pressure torsion (HPT) technique. The microstructure and mechanical properties of the HPT-processed material in different structural states were investigated. The HPT-processed material exhibits a high value of ultimate tensile strength (~770 MPa) but low ductility. Short-term annealing at 250 °C and additional deformation with HPT to 0.25 of revolution at room temperature resulted in a slight decrease in the material{\textquoteright}s strength to ~700 MPa but provided ductility of ∼9%. Physical mechanisms to improve plasticity in correlation with microstructure evolution are discussed.",

keywords = "Wire arc additive manufacturing, microstructure, Mechanical characteristics, aluminum–magnesium alloys, aluminum–scandium alloys, ultrafine-grained structure, mechanical characteristics, wire arc additive manufacturing",

author = "Aydar Mavlyutov and Alexey Evstifeev and Darya Volosevich and Гущина, {Марина Олеговна} and Artem Voropaev and Oleg Zotov and Olga Klimova-Korsmik",

note = "Mavlyutov, A.; Evstifeev, A.; Volosevich, D.; Gushchina, M.; Voropaev, A.; Zotov, O.; Klimova-Korsmik, O. The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of Composite from 5056 and 1580 Aluminum Alloys Produced with Wire Arc Additive Manufacturing. Metals 2023, 13, 1281. https://doi.org/10.3390/met13071281",

year = "2023",

month = jul,

day = "17",

doi = "10.3390/met13071281",

language = "English",

volume = "13",

journal = "Metals",

issn = "2075-4701",

publisher = "MDPI AG",

number = "7",

}

RIS

TY - JOUR

T1 - The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of Composite from 5056 and 1580 Aluminum Alloys Produced with Wire Arc Additive Manufacturing

AU - Mavlyutov, Aydar

AU - Evstifeev, Alexey

AU - Volosevich, Darya

AU - Гущина, Марина Олеговна

AU - Voropaev, Artem

AU - Zotov, Oleg

AU - Klimova-Korsmik, Olga

N1 - Mavlyutov, A.; Evstifeev, A.; Volosevich, D.; Gushchina, M.; Voropaev, A.; Zotov, O.; Klimova-Korsmik, O. The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of Composite from 5056 and 1580 Aluminum Alloys Produced with Wire Arc Additive Manufacturing. Metals 2023, 13, 1281. https://doi.org/10.3390/met13071281

PY - 2023/7/17

Y1 - 2023/7/17

N2 - In this study, a composite with alternate layers of 5056 and 1580 alloys was manufactured with wire arc additive manufacturing technology. It is shown that increased strength characteristics of composite material can be obtained with deformation treatment using a high-pressure torsion (HPT) technique. The microstructure and mechanical properties of the HPT-processed material in different structural states were investigated. The HPT-processed material exhibits a high value of ultimate tensile strength (~770 MPa) but low ductility. Short-term annealing at 250 °C and additional deformation with HPT to 0.25 of revolution at room temperature resulted in a slight decrease in the material’s strength to ~700 MPa but provided ductility of ∼9%. Physical mechanisms to improve plasticity in correlation with microstructure evolution are discussed.

AB - In this study, a composite with alternate layers of 5056 and 1580 alloys was manufactured with wire arc additive manufacturing technology. It is shown that increased strength characteristics of composite material can be obtained with deformation treatment using a high-pressure torsion (HPT) technique. The microstructure and mechanical properties of the HPT-processed material in different structural states were investigated. The HPT-processed material exhibits a high value of ultimate tensile strength (~770 MPa) but low ductility. Short-term annealing at 250 °C and additional deformation with HPT to 0.25 of revolution at room temperature resulted in a slight decrease in the material’s strength to ~700 MPa but provided ductility of ∼9%. Physical mechanisms to improve plasticity in correlation with microstructure evolution are discussed.

KW - Wire arc additive manufacturing

KW - microstructure

KW - Mechanical characteristics

KW - aluminum–magnesium alloys

KW - aluminum–scandium alloys

KW - ultrafine-grained structure

KW - mechanical characteristics

KW - wire arc additive manufacturing

UR - https://www.mendeley.com/catalogue/1ae6a1a6-f088-3892-a6cc-682ed5cb395a/

U2 - 10.3390/met13071281

DO - 10.3390/met13071281

M3 - Article

VL - 13

JO - Metals

JF - Metals

SN - 2075-4701

IS - 7

M1 - 1281

ER -

ID: 107271818