Standard

Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. / Belyaev, S.; Sergey, M.; Frolova, N.; Pilyugin, V.; Resnina, N.; Slesarenko, V.; Zeldovich, V.

Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. 2013. стр. 518-524.

Результаты исследований: Публикации в книгах, отчётах, сборниках, трудах конференций › статья в сборнике материалов конференции

Harvard

Belyaev, S, Sergey, M, Frolova, N, Pilyugin, V, Resnina, N, Slesarenko, V & Zeldovich, V 2013, Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. в Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. стр. 518-524. https://doi.org/10.4028/www.scientific.net/MSF.738-739.518

APA

Belyaev, S., Sergey, M., Frolova, N., Pilyugin, V., Resnina, N., Slesarenko, V., & Zeldovich, V. (2013). Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. в Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing (стр. 518-524) https://doi.org/10.4028/www.scientific.net/MSF.738-739.518

Vancouver

Belyaev S, Sergey M, Frolova N, Pilyugin V, Resnina N, Slesarenko V и пр. Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. в Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. 2013. стр. 518-524 https://doi.org/10.4028/www.scientific.net/MSF.738-739.518

Author

Belyaev, S. ; Sergey, M. ; Frolova, N. ; Pilyugin, V. ; Resnina, N. ; Slesarenko, V. ; Zeldovich, V. / Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing. 2013. стр. 518-524

BibTeX

@inproceedings{8377aa37b525475687912ac2a3c3ad09,
title = "Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing",
abstract = "Abstract. Processes, occurring on annealing of TiNi alloy, processed by high pressure torsion (HPT), were the focus of this research. Some peaks of heat release were found on heating the deformed samples up to 550 °C. If the initial structure of the alloy was amorphous (after 3.5 turns of HPT), then structural relaxation, crystallization and grain growth occurred on heating. When alloys had a crystalline structure (after rotation by 15 and 90 degrees), recovery, recrystallization and further grain growth took place on heating. It was observed that the TiNi alloy, subjected to 3.5 turns of HPT and subsequent heating up to 550 °C, underwent unusual kinetics of martensitic transformations. Austenite B2 phase transformed to martensite B19' phase following two transformation sequences B2→R→B19' and B2→ B19'.",
keywords = "Martensitic transformations, shape memory effect, amorphous-crystalline materials",
author = "S. Belyaev and M. Sergey and N. Frolova and V. Pilyugin and N. Resnina and V. Slesarenko and V. Zeldovich",
year = "2013",
doi = "10.4028/www.scientific.net/MSF.738-739.518",
language = "English",
isbn = "9783037856109",
pages = "518--524",
booktitle = "Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing",

}

RIS

TY - GEN

T1 - Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing

AU - Belyaev, S.

AU - Sergey, M.

AU - Frolova, N.

AU - Pilyugin, V.

AU - Resnina, N.

AU - Slesarenko, V.

AU - Zeldovich, V.

PY - 2013

Y1 - 2013

N2 - Abstract. Processes, occurring on annealing of TiNi alloy, processed by high pressure torsion (HPT), were the focus of this research. Some peaks of heat release were found on heating the deformed samples up to 550 °C. If the initial structure of the alloy was amorphous (after 3.5 turns of HPT), then structural relaxation, crystallization and grain growth occurred on heating. When alloys had a crystalline structure (after rotation by 15 and 90 degrees), recovery, recrystallization and further grain growth took place on heating. It was observed that the TiNi alloy, subjected to 3.5 turns of HPT and subsequent heating up to 550 °C, underwent unusual kinetics of martensitic transformations. Austenite B2 phase transformed to martensite B19' phase following two transformation sequences B2→R→B19' and B2→ B19'.

AB - Abstract. Processes, occurring on annealing of TiNi alloy, processed by high pressure torsion (HPT), were the focus of this research. Some peaks of heat release were found on heating the deformed samples up to 550 °C. If the initial structure of the alloy was amorphous (after 3.5 turns of HPT), then structural relaxation, crystallization and grain growth occurred on heating. When alloys had a crystalline structure (after rotation by 15 and 90 degrees), recovery, recrystallization and further grain growth took place on heating. It was observed that the TiNi alloy, subjected to 3.5 turns of HPT and subsequent heating up to 550 °C, underwent unusual kinetics of martensitic transformations. Austenite B2 phase transformed to martensite B19' phase following two transformation sequences B2→R→B19' and B2→ B19'.

KW - Martensitic transformations

KW - shape memory effect

KW - amorphous-crystalline materials

U2 - 10.4028/www.scientific.net/MSF.738-739.518

DO - 10.4028/www.scientific.net/MSF.738-739.518

M3 - Conference contribution

SN - 9783037856109

SP - 518

EP - 524

BT - Structure and properties of TiNi alloy subjected to severe plastic deformation and subsequent annealing

ER -

ID: 7374491