Standard

Novel membranes based on hydroxyethyl cellulose/sodium alginate for pervaporation dehydration of isopropanol. / Dmitrenko, Mariia; Zolotarev, Andrey; Liamin, Vladislav; Kuzminova, Anna; Mazur, Anton; Semenov, Konstantin; Ermakov, Sergey; Penkova, Anastasia.

в: Polymers, Том 13, № 5, 674, 01.03.2021.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

APA

Vancouver

Author

BibTeX

@article{37086f8de33a4b38aa0b8a2b680d5ed0,
title = "Novel membranes based on hydroxyethyl cellulose/sodium alginate for pervaporation dehydration of isopropanol",
abstract = "Membrane methods, especially pervaporation, are quickly growing up. In line with that, effective membrane materials based on biopolymers are required for the industrially significant mixtures separation. To essentially improve membrane transport characteristics, the application of the surface or/and bulk modifications can be carried out. In the present study, novel dense and supported membranes based on hydroxyethyl cellulose (HEC)/sodium alginate (SA) were devel-oped for pervaporation dehydration of isopropanol using several approaches: (1) the selection of the optimal ratio of polymers, (2) the introduction of fullerenol in blend polymer matrix, (3) the selection of the optimal cross-linking agent for the membranes, (4) the application of layer-by-layer deposition of polyelectrolytes on supported membrane surface (poly(sodium 4-styrenesulfonate) (PSS)/poly(allylamine hydrochloride) (PAH) and PSS/SA). Structural and physicochemical characteristics of the membranes were analyzed by different methods. A cross-linked supported membrane based on HEC/SA/fullerenol (5%) composite possessed the following transport characteristics in pervaporation dehydration of isopropanol (12–50 wt.% water): 0.42–1.72 kg/(m2h) permeation flux, and 77.8–99.99 wt.% water content in the permeate. The surface modification of this membrane with 5 bilayers of PSS/PAH and PSS/SA resulted in the increase of permeation flux up to 0.47–3.0 and 0.46–1.9 kg/(m2h), respectively, with lower selectivity.",
keywords = "Fullerenol, Hydroxyethyl cellulose, Layer-by-layer assembly, Pervaporation dehydration, Sodium alginate, hydroxyethyl cellulose, sodium alginate, layer-by-layer assembly, fullerenol, pervaporation dehydration",
author = "Mariia Dmitrenko and Andrey Zolotarev and Vladislav Liamin and Anna Kuzminova and Anton Mazur and Konstantin Semenov and Sergey Ermakov and Anastasia Penkova",
note = "Publisher Copyright: {\textcopyright} 2021 by the authors. Licensee MDPI, Basel, Switzerland. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.",
year = "2021",
month = mar,
day = "1",
doi = "10.3390/polym13050674",
language = "English",
volume = "13",
journal = "Polymers",
issn = "2073-4360",
publisher = "MDPI AG",
number = "5",

}

RIS

TY - JOUR

T1 - Novel membranes based on hydroxyethyl cellulose/sodium alginate for pervaporation dehydration of isopropanol

AU - Dmitrenko, Mariia

AU - Zolotarev, Andrey

AU - Liamin, Vladislav

AU - Kuzminova, Anna

AU - Mazur, Anton

AU - Semenov, Konstantin

AU - Ermakov, Sergey

AU - Penkova, Anastasia

N1 - Publisher Copyright: © 2021 by the authors. Licensee MDPI, Basel, Switzerland. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.

PY - 2021/3/1

Y1 - 2021/3/1

N2 - Membrane methods, especially pervaporation, are quickly growing up. In line with that, effective membrane materials based on biopolymers are required for the industrially significant mixtures separation. To essentially improve membrane transport characteristics, the application of the surface or/and bulk modifications can be carried out. In the present study, novel dense and supported membranes based on hydroxyethyl cellulose (HEC)/sodium alginate (SA) were devel-oped for pervaporation dehydration of isopropanol using several approaches: (1) the selection of the optimal ratio of polymers, (2) the introduction of fullerenol in blend polymer matrix, (3) the selection of the optimal cross-linking agent for the membranes, (4) the application of layer-by-layer deposition of polyelectrolytes on supported membrane surface (poly(sodium 4-styrenesulfonate) (PSS)/poly(allylamine hydrochloride) (PAH) and PSS/SA). Structural and physicochemical characteristics of the membranes were analyzed by different methods. A cross-linked supported membrane based on HEC/SA/fullerenol (5%) composite possessed the following transport characteristics in pervaporation dehydration of isopropanol (12–50 wt.% water): 0.42–1.72 kg/(m2h) permeation flux, and 77.8–99.99 wt.% water content in the permeate. The surface modification of this membrane with 5 bilayers of PSS/PAH and PSS/SA resulted in the increase of permeation flux up to 0.47–3.0 and 0.46–1.9 kg/(m2h), respectively, with lower selectivity.

AB - Membrane methods, especially pervaporation, are quickly growing up. In line with that, effective membrane materials based on biopolymers are required for the industrially significant mixtures separation. To essentially improve membrane transport characteristics, the application of the surface or/and bulk modifications can be carried out. In the present study, novel dense and supported membranes based on hydroxyethyl cellulose (HEC)/sodium alginate (SA) were devel-oped for pervaporation dehydration of isopropanol using several approaches: (1) the selection of the optimal ratio of polymers, (2) the introduction of fullerenol in blend polymer matrix, (3) the selection of the optimal cross-linking agent for the membranes, (4) the application of layer-by-layer deposition of polyelectrolytes on supported membrane surface (poly(sodium 4-styrenesulfonate) (PSS)/poly(allylamine hydrochloride) (PAH) and PSS/SA). Structural and physicochemical characteristics of the membranes were analyzed by different methods. A cross-linked supported membrane based on HEC/SA/fullerenol (5%) composite possessed the following transport characteristics in pervaporation dehydration of isopropanol (12–50 wt.% water): 0.42–1.72 kg/(m2h) permeation flux, and 77.8–99.99 wt.% water content in the permeate. The surface modification of this membrane with 5 bilayers of PSS/PAH and PSS/SA resulted in the increase of permeation flux up to 0.47–3.0 and 0.46–1.9 kg/(m2h), respectively, with lower selectivity.

KW - Fullerenol

KW - Hydroxyethyl cellulose

KW - Layer-by-layer assembly

KW - Pervaporation dehydration

KW - Sodium alginate

KW - hydroxyethyl cellulose

KW - sodium alginate

KW - layer-by-layer assembly

KW - fullerenol

KW - pervaporation dehydration

UR - http://www.scopus.com/inward/record.url?scp=85102843874&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/54c5cc99-9ca6-33d7-991d-38bf309af26f/

U2 - 10.3390/polym13050674

DO - 10.3390/polym13050674

M3 - Article

AN - SCOPUS:85102843874

VL - 13

JO - Polymers

JF - Polymers

SN - 2073-4360

IS - 5

M1 - 674

ER -

ID: 75073468