Functional Properties of the Multilayer NiTi Alloy Produced by Wire Arc Additive Manufacturing

Standard

Functional Properties of the Multilayer NiTi Alloy Produced by Wire Arc Additive Manufacturing. / Resnina, N.; Palani, I. A.; Belyaev, S.; Singh, Shalini; Kumar, Ajit; Bikbaev, R.; Sahu, Anshu.

в: Shape Memory and Superelasticity, Том 8, № 1, 03.2022, стр. 5-15.

Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование

Author

Resnina, N. ; Palani, I. A. ; Belyaev, S. ; Singh, Shalini ; Kumar, Ajit ; Bikbaev, R. ; Sahu, Anshu. / Functional Properties of the Multilayer NiTi Alloy Produced by Wire Arc Additive Manufacturing. в: Shape Memory and Superelasticity. 2022 ; Том 8, № 1. стр. 5-15.

BibTeX

@article{ea55b4b31cb847c38b98a9361ff0e174,

title = "Functional Properties of the Multilayer NiTi Alloy Produced by Wire Arc Additive Manufacturing",

abstract = "The paper is aimed to study the functional properties in the layered NiTi sample produced by wire arc additive manufacturing (WAAM). The experimental studies were carried out using two types of samples: including the Ti–rich and Ni-rich layers or including Ni-rich layers only. The obtained results showed that the existence of the Ti–rich NiTi layer affected the two-way shape memory effect, which was two times higher than the sample including the Ni-rich NiTi layers only. This was due to the additional internal stress formed during preliminary deformation on the border between the Ti–rich and Ni-rich NiTi layers. It was found that the existence of the Ti–rich NiTi layer suppressed the initiation of superelastic response because the stress-induced martensite remained stable on unloading. It was observed that excluding the Ti–rich NiTi layer from the deformation allowed to reveal the superelasticity effect. It was also noticed that the value of the maximum recoverable strain did not exceed 4%, which was 2–2.5 times less than in the NiTi samples produced by conventional technologies. It was assumed that a small recoverable stain was caused by the texture and a small strain up to failure.",

keywords = "Shape memory alloys, Shape memory effect, Superelasticity, Wire arc additive manufacturing, TRANSFORMATION, MEMORY, SUBSTRATE, MARTENSITE STABILIZATION, STRESS, MECHANICAL-PROPERTIES, DEFORMATION, REORIENTATION",

author = "N. Resnina and Palani, {I. A.} and S. Belyaev and Shalini Singh and Ajit Kumar and R. Bikbaev and Anshu Sahu",

note = "Publisher Copyright: {\textcopyright} 2022, ASM International.",

year = "2022",

month = mar,

doi = "10.1007/s40830-022-00359-0",

language = "English",

volume = "8",

pages = "5--15",

journal = "Shape Memory and Superelasticity",

issn = "2199-384X",

publisher = "Springer Nature",

number = "1",

}

RIS

TY - JOUR

T1 - Functional Properties of the Multilayer NiTi Alloy Produced by Wire Arc Additive Manufacturing

AU - Resnina, N.

AU - Palani, I. A.

AU - Belyaev, S.

AU - Singh, Shalini

AU - Kumar, Ajit

AU - Bikbaev, R.

AU - Sahu, Anshu

PY - 2022/3

Y1 - 2022/3

N2 - The paper is aimed to study the functional properties in the layered NiTi sample produced by wire arc additive manufacturing (WAAM). The experimental studies were carried out using two types of samples: including the Ti–rich and Ni-rich layers or including Ni-rich layers only. The obtained results showed that the existence of the Ti–rich NiTi layer affected the two-way shape memory effect, which was two times higher than the sample including the Ni-rich NiTi layers only. This was due to the additional internal stress formed during preliminary deformation on the border between the Ti–rich and Ni-rich NiTi layers. It was found that the existence of the Ti–rich NiTi layer suppressed the initiation of superelastic response because the stress-induced martensite remained stable on unloading. It was observed that excluding the Ti–rich NiTi layer from the deformation allowed to reveal the superelasticity effect. It was also noticed that the value of the maximum recoverable strain did not exceed 4%, which was 2–2.5 times less than in the NiTi samples produced by conventional technologies. It was assumed that a small recoverable stain was caused by the texture and a small strain up to failure.

AB - The paper is aimed to study the functional properties in the layered NiTi sample produced by wire arc additive manufacturing (WAAM). The experimental studies were carried out using two types of samples: including the Ti–rich and Ni-rich layers or including Ni-rich layers only. The obtained results showed that the existence of the Ti–rich NiTi layer affected the two-way shape memory effect, which was two times higher than the sample including the Ni-rich NiTi layers only. This was due to the additional internal stress formed during preliminary deformation on the border between the Ti–rich and Ni-rich NiTi layers. It was found that the existence of the Ti–rich NiTi layer suppressed the initiation of superelastic response because the stress-induced martensite remained stable on unloading. It was observed that excluding the Ti–rich NiTi layer from the deformation allowed to reveal the superelasticity effect. It was also noticed that the value of the maximum recoverable strain did not exceed 4%, which was 2–2.5 times less than in the NiTi samples produced by conventional technologies. It was assumed that a small recoverable stain was caused by the texture and a small strain up to failure.

KW - Shape memory alloys

KW - Shape memory effect

KW - Superelasticity

KW - Wire arc additive manufacturing

KW - TRANSFORMATION

KW - MEMORY

KW - SUBSTRATE

KW - MARTENSITE STABILIZATION

KW - STRESS

KW - MECHANICAL-PROPERTIES

KW - DEFORMATION

KW - REORIENTATION

UR - http://www.scopus.com/inward/record.url?scp=85124358055&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/91306150-7181-3814-9cbf-2f326b1d8c71/

U2 - 10.1007/s40830-022-00359-0

DO - 10.1007/s40830-022-00359-0

M3 - Article

AN - SCOPUS:85124358055

VL - 8

SP - 5

EP - 15

JO - Shape Memory and Superelasticity

JF - Shape Memory and Superelasticity

SN - 2199-384X

IS - 1

ER -

ID: 93438868