Standard
Behavior of the grade 5 titanium alloy in different structural states in conditions of high-speed erosion. / Atroshenko, S. A.; Evstifeev, A. D.; Kazarinov, N. A.; Petrov, Yu. V.; Valiev, R. Z.
Procedia Structural Integrity: XXVII International Conference «Mathematical and Computer Simulation in Mechanics of Solids and Structures. Fundamentals of static and dynamic fracture»,MCM 2017,25-27 September 2017, Saint-Petersburg, Russia. ред. / Y Petrov; Silberschmidt. Том 6 Elsevier, 2017. стр. 190-195.
Результаты исследований: Публикации в книгах, отчётах, сборниках, трудах конференций › статья в сборнике материалов конференции › Рецензирование
Harvard
Atroshenko, SA, Evstifeev, AD, Kazarinov, NA, Petrov, YV & Valiev, RZ 2017,
Behavior of the grade 5 titanium alloy in different structural states in conditions of high-speed erosion. в Y Petrov & Silberschmidt (ред.),
Procedia Structural Integrity: XXVII International Conference «Mathematical and Computer Simulation in Mechanics of Solids and Structures. Fundamentals of static and dynamic fracture»,MCM 2017,25-27 September 2017, Saint-Petersburg, Russia. Том. 6, Elsevier, стр. 190-195, 27th International Conference on Mathematical and Computer Simulations in Mechanics of Solids and Structures - Fundamentals of Static and Dynamic Fracture (MCM), Saint Petersburg, Российская Федерация,
25/09/17.
https://doi.org/10.1016/j.prostr.2017.11.029
APA
Atroshenko, S. A., Evstifeev, A. D., Kazarinov, N. A., Petrov, Y. V., & Valiev, R. Z. (2017).
Behavior of the grade 5 titanium alloy in different structural states in conditions of high-speed erosion. в Y. Petrov, & Silberschmidt (Ред.),
Procedia Structural Integrity: XXVII International Conference «Mathematical and Computer Simulation in Mechanics of Solids and Structures. Fundamentals of static and dynamic fracture»,MCM 2017,25-27 September 2017, Saint-Petersburg, Russia (Том 6, стр. 190-195). Elsevier.
https://doi.org/10.1016/j.prostr.2017.11.029
Vancouver
Atroshenko SA, Evstifeev AD, Kazarinov NA, Petrov YV, Valiev RZ.
Behavior of the grade 5 titanium alloy in different structural states in conditions of high-speed erosion. в Petrov Y, Silberschmidt, Редакторы, Procedia Structural Integrity: XXVII International Conference «Mathematical and Computer Simulation in Mechanics of Solids and Structures. Fundamentals of static and dynamic fracture»,MCM 2017,25-27 September 2017, Saint-Petersburg, Russia. Том 6. Elsevier. 2017. стр. 190-195
https://doi.org/10.1016/j.prostr.2017.11.029
Author
Atroshenko, S. A. ; Evstifeev, A. D. ; Kazarinov, N. A. ; Petrov, Yu. V. ; Valiev, R. Z. /
Behavior of the grade 5 titanium alloy in different structural states in conditions of high-speed erosion. Procedia Structural Integrity: XXVII International Conference «Mathematical and Computer Simulation in Mechanics of Solids and Structures. Fundamentals of static and dynamic fracture»,MCM 2017,25-27 September 2017, Saint-Petersburg, Russia. Редактор / Y Petrov ; Silberschmidt. Том 6 Elsevier, 2017. стр. 190-195
BibTeX
@inproceedings{97386bb85c66473a98b661a87824d0b1,
title = "Behavior of the grade 5 titanium alloy in different structural states in conditions of high-speed erosion",
abstract = "Behavior of a Grade 5 titanium alloy after high pressure torsion (HPT) and equal channel angular pressing (ECAP) under conditions of high-speed erosion was studied. Samples of the alloy in the ultrafine-grained state after the HPT and ECAP treatment were tested in an abrasive flow with various velocities using a technique similar to those presented in article Petrov et al. (2017). Two abrasive powders were used: with 109 and 230 μm average particle size. The tests were carried out at room temperature. Fracture surface parameters were studied for all tested specimens and fracture type (ratio of viscous and brittle fracture) was evaluated in each case. Additionally, surface roughness mass loss dependencies on particle flow velocity was investigated for both HPT and ECAP samples.",
keywords = "Grade 5 titanium, HPT, ECAP, high-speed erosion",
author = "Atroshenko, {S. A.} and Evstifeev, {A. D.} and Kazarinov, {N. A.} and Petrov, {Yu. V.} and Valiev, {R. Z.}",
year = "2017",
doi = "10.1016/j.prostr.2017.11.029",
language = "English",
volume = "6",
pages = "190--195",
editor = "Y Petrov and Silberschmidt",
booktitle = "Procedia Structural Integrity",
publisher = "Elsevier",
address = "Netherlands",
note = "27th International Conference on Mathematical and Computer Simulations in Mechanics of Solids and Structures - Fundamentals of Static and Dynamic Fracture (MCM) ; Conference date: 25-09-2017 Through 27-09-2017",
}
RIS
TY - GEN
T1 - Behavior of the grade 5 titanium alloy in different structural states in conditions of high-speed erosion
AU - Atroshenko, S. A.
AU - Evstifeev, A. D.
AU - Kazarinov, N. A.
AU - Petrov, Yu. V.
AU - Valiev, R. Z.
PY - 2017
Y1 - 2017
N2 - Behavior of a Grade 5 titanium alloy after high pressure torsion (HPT) and equal channel angular pressing (ECAP) under conditions of high-speed erosion was studied. Samples of the alloy in the ultrafine-grained state after the HPT and ECAP treatment were tested in an abrasive flow with various velocities using a technique similar to those presented in article Petrov et al. (2017). Two abrasive powders were used: with 109 and 230 μm average particle size. The tests were carried out at room temperature. Fracture surface parameters were studied for all tested specimens and fracture type (ratio of viscous and brittle fracture) was evaluated in each case. Additionally, surface roughness mass loss dependencies on particle flow velocity was investigated for both HPT and ECAP samples.
AB - Behavior of a Grade 5 titanium alloy after high pressure torsion (HPT) and equal channel angular pressing (ECAP) under conditions of high-speed erosion was studied. Samples of the alloy in the ultrafine-grained state after the HPT and ECAP treatment were tested in an abrasive flow with various velocities using a technique similar to those presented in article Petrov et al. (2017). Two abrasive powders were used: with 109 and 230 μm average particle size. The tests were carried out at room temperature. Fracture surface parameters were studied for all tested specimens and fracture type (ratio of viscous and brittle fracture) was evaluated in each case. Additionally, surface roughness mass loss dependencies on particle flow velocity was investigated for both HPT and ECAP samples.
KW - Grade 5 titanium
KW - HPT
KW - ECAP
KW - high-speed erosion
UR - https://www.sciencedirect.com/science/article/pii/S2452321617303724
U2 - 10.1016/j.prostr.2017.11.029
DO - 10.1016/j.prostr.2017.11.029
M3 - Conference contribution
VL - 6
SP - 190
EP - 195
BT - Procedia Structural Integrity
A2 - Petrov, Y
A2 - Silberschmidt, null
PB - Elsevier
T2 - 27th International Conference on Mathematical and Computer Simulations in Mechanics of Solids and Structures - Fundamentals of Static and Dynamic Fracture (MCM)
Y2 - 25 September 2017 through 27 September 2017
ER -
