Standard

Submicrocrystalline austenitic stainless steel processed by cold or warm high pressure torsion. / Tikhonova, Marina; Enikeev, Nariman; Valiev, Ruslan Z.; Belyakov, Andrey; Kaibyshev, Rustam.

Superplasticity in Advanced Materials, ICSAM 2015. Vol. 838-839 Trans Tech Publications Ltd, 2016. p. 398-403 (Materials Science Forum; Vol. 838-839).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review

Harvard

Tikhonova, M, Enikeev, N, Valiev, RZ, Belyakov, A & Kaibyshev, R 2016, Submicrocrystalline austenitic stainless steel processed by cold or warm high pressure torsion. in Superplasticity in Advanced Materials, ICSAM 2015. vol. 838-839, Materials Science Forum, vol. 838-839, Trans Tech Publications Ltd, pp. 398-403, 12th International Conference on Superplasticity in Advanced Materials, ICSAM 2015, Tokyo, Japan, 6/09/15. https://doi.org/10.4028/www.scientific.net/MSF.838-839.398

APA

Tikhonova, M., Enikeev, N., Valiev, R. Z., Belyakov, A., & Kaibyshev, R. (2016). Submicrocrystalline austenitic stainless steel processed by cold or warm high pressure torsion. In Superplasticity in Advanced Materials, ICSAM 2015 (Vol. 838-839, pp. 398-403). (Materials Science Forum; Vol. 838-839). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.838-839.398

Vancouver

Tikhonova M, Enikeev N, Valiev RZ, Belyakov A, Kaibyshev R. Submicrocrystalline austenitic stainless steel processed by cold or warm high pressure torsion. In Superplasticity in Advanced Materials, ICSAM 2015. Vol. 838-839. Trans Tech Publications Ltd. 2016. p. 398-403. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.838-839.398

Author

Tikhonova, Marina ; Enikeev, Nariman ; Valiev, Ruslan Z. ; Belyakov, Andrey ; Kaibyshev, Rustam. / Submicrocrystalline austenitic stainless steel processed by cold or warm high pressure torsion. Superplasticity in Advanced Materials, ICSAM 2015. Vol. 838-839 Trans Tech Publications Ltd, 2016. pp. 398-403 (Materials Science Forum).

BibTeX

@inproceedings{f45b47c0a7ef45c29570001728396907,
title = "Submicrocrystalline austenitic stainless steel processed by cold or warm high pressure torsion",
abstract = "The formation of submicrocrystalline structure during severe plastic deformation and its effect on mechanical properties of an S304H austenitic stainless steel with chemical composition of Fe – 0.1C – 0.12N – 0.1Si – 0.95Mn – 18.4Cr – 7.85Ni – 3.2Cu – 0.5Nb – 0.01P – 0.006S (all in mass%) were studied. The severe plastic deformation was carried out by high pressure torsion (HPT) at two different temperatures, i.e., room temperature or 400°C. HPT at room temperature or 400°C led to the formation of a fully austenitic submicrocrystalline structure. The grain size and strength of the steels with ultrafine-grained structures produced by cold or warm HPT were almost the same. The ultimate tensile strengths were 1950 MPa and 1828 MPa after HPT at room temperature and 400°C, respectively.",
keywords = "Austenitic stainless steel, High pressure torsion, Mechanical properties, Ultrafine-grained structure",
author = "Marina Tikhonova and Nariman Enikeev and Valiev, {Ruslan Z.} and Andrey Belyakov and Rustam Kaibyshev",
year = "2016",
doi = "10.4028/www.scientific.net/MSF.838-839.398",
language = "English",
isbn = "9783038356721",
volume = "838-839",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "398--403",
booktitle = "Superplasticity in Advanced Materials, ICSAM 2015",
address = "Germany",
note = "12th International Conference on Superplasticity in Advanced Materials, ICSAM 2015 ; Conference date: 06-09-2015 Through 10-09-2015",

}

RIS

TY - GEN

T1 - Submicrocrystalline austenitic stainless steel processed by cold or warm high pressure torsion

AU - Tikhonova, Marina

AU - Enikeev, Nariman

AU - Valiev, Ruslan Z.

AU - Belyakov, Andrey

AU - Kaibyshev, Rustam

PY - 2016

Y1 - 2016

N2 - The formation of submicrocrystalline structure during severe plastic deformation and its effect on mechanical properties of an S304H austenitic stainless steel with chemical composition of Fe – 0.1C – 0.12N – 0.1Si – 0.95Mn – 18.4Cr – 7.85Ni – 3.2Cu – 0.5Nb – 0.01P – 0.006S (all in mass%) were studied. The severe plastic deformation was carried out by high pressure torsion (HPT) at two different temperatures, i.e., room temperature or 400°C. HPT at room temperature or 400°C led to the formation of a fully austenitic submicrocrystalline structure. The grain size and strength of the steels with ultrafine-grained structures produced by cold or warm HPT were almost the same. The ultimate tensile strengths were 1950 MPa and 1828 MPa after HPT at room temperature and 400°C, respectively.

AB - The formation of submicrocrystalline structure during severe plastic deformation and its effect on mechanical properties of an S304H austenitic stainless steel with chemical composition of Fe – 0.1C – 0.12N – 0.1Si – 0.95Mn – 18.4Cr – 7.85Ni – 3.2Cu – 0.5Nb – 0.01P – 0.006S (all in mass%) were studied. The severe plastic deformation was carried out by high pressure torsion (HPT) at two different temperatures, i.e., room temperature or 400°C. HPT at room temperature or 400°C led to the formation of a fully austenitic submicrocrystalline structure. The grain size and strength of the steels with ultrafine-grained structures produced by cold or warm HPT were almost the same. The ultimate tensile strengths were 1950 MPa and 1828 MPa after HPT at room temperature and 400°C, respectively.

KW - Austenitic stainless steel

KW - High pressure torsion

KW - Mechanical properties

KW - Ultrafine-grained structure

UR - http://www.scopus.com/inward/record.url?scp=84958034643&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.838-839.398

DO - 10.4028/www.scientific.net/MSF.838-839.398

M3 - Conference contribution

AN - SCOPUS:84958034643

SN - 9783038356721

VL - 838-839

T3 - Materials Science Forum

SP - 398

EP - 403

BT - Superplasticity in Advanced Materials, ICSAM 2015

PB - Trans Tech Publications Ltd

T2 - 12th International Conference on Superplasticity in Advanced Materials, ICSAM 2015

Y2 - 6 September 2015 through 10 September 2015

ER -

ID: 16947746