Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Post-buckling deformation and fracture of a stretched plate with a crack. / Morozov, Nikita F.; Semenov, Boris N.; Tovstik, Petr E.
COMPGYN 2019 7th ECCOMAS : Thematic Conf. on Computational Methods in Structural Dynamics and Earthquake Engineering.. ed. / Manolis Papadrakakis; Michalis Fragiadakis. Athens. Greece : National Technical University of Athens (NTUA), 2019. p. 3603-3610 (COMPDYN Proceedings; Vol. 2).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
}
TY - GEN
T1 - Post-buckling deformation and fracture of a stretched plate with a crack
AU - Morozov, Nikita F.
AU - Semenov, Boris N.
AU - Tovstik, Petr E.
N1 - Conference code: 7th
PY - 2019/1/1
Y1 - 2019/1/1
N2 - The tension of the thin plate with a rectilinear crack is considered. It is known that in the neighborhood of the crack appear compressive stresses, which at a certain level of tension could lead to local buckling of the plate. Of interest is the concentration of maximum tensile stresses in plates after buckling.The purpose of the study is to clarify the issue of whether buckling promotes crack growth or leads to the stabilization of deformations. For the analysis of the stress state of the plate in the initial post-critical stage the approximate analytical solution is suggested. The post-buckling stretching the plate with central crack is analyzed by the finite element method using ANSYS code . The effect of the buckling under tension of a plate with a central crack on the level of the stress state is estimated. An analysis of the stress state in the vicinity of the tip of the central crack under uniaxial tension shows that with possible local stability loss near the crack an increase in tensile stresses in the vicinity of the crack tip is observed, and, as a result, load leading to destruction should be reduced.
AB - The tension of the thin plate with a rectilinear crack is considered. It is known that in the neighborhood of the crack appear compressive stresses, which at a certain level of tension could lead to local buckling of the plate. Of interest is the concentration of maximum tensile stresses in plates after buckling.The purpose of the study is to clarify the issue of whether buckling promotes crack growth or leads to the stabilization of deformations. For the analysis of the stress state of the plate in the initial post-critical stage the approximate analytical solution is suggested. The post-buckling stretching the plate with central crack is analyzed by the finite element method using ANSYS code . The effect of the buckling under tension of a plate with a central crack on the level of the stress state is estimated. An analysis of the stress state in the vicinity of the tip of the central crack under uniaxial tension shows that with possible local stability loss near the crack an increase in tensile stresses in the vicinity of the crack tip is observed, and, as a result, load leading to destruction should be reduced.
KW - Crack
KW - Finite element method
KW - Fracture
KW - Nonlinear buckling analysis
KW - Plate
KW - Stability
KW - Tension
UR - http://www.scopus.com/inward/record.url?scp=85079043169&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:85079043169
T3 - COMPDYN Proceedings
SP - 3603
EP - 3610
BT - COMPGYN 2019 7th ECCOMAS
A2 - Papadrakakis, Manolis
A2 - Fragiadakis, Michalis
PB - National Technical University of Athens (NTUA)
CY - Athens. Greece
T2 - 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2019
Y2 - 24 June 2019 through 26 June 2019
ER -
ID: 49647762