Standard

Poly(Lactic Acid) and Nanocrystalline Cellulose Methacrylated Particles for Preparation of Cryogelated and 3D-Printed Scaffolds for Tissue Engineering. / Leonovich , Mariia ; Korzhikov-Vlakh, Viktor ; Lavrentieva , Antonina ; Pepelanova, Iliyana; Korzhikova-Vlakh , Evgenia ; Tennikova, Tatiana .

In: Polymers, Vol. 15, No. 3, 651, 27.01.2023.

Research output: Contribution to journalArticlepeer-review

Harvard

APA

Vancouver

Author

BibTeX

@article{a2df28a8cb0647fa974c31c1a8dd0bff,
title = "Poly(Lactic Acid) and Nanocrystalline Cellulose Methacrylated Particles for Preparation of Cryogelated and 3D-Printed Scaffolds for Tissue Engineering",
abstract = "Different parts of bones possess different properties, such as the capacity for remodeling cell content, porosity, and protein composition. For various traumatic or surgical tissue defects, the application of tissue-engineered constructs seems to be a promising strategy. Despite significant research efforts, such constructs are still rarely available in the clinic. One of the reasons is the lack of resorbable materials, whose properties can be adjusted according to the intended tissue or tissue contacts. Here, we present our first results on the development of a toolbox, by which the scaffolds with easily tunable mechanical and biological properties could be prepared. Biodegradable poly(lactic acid) and nanocrystalline cellulose methacrylated particles were obtained, characterized, and used for preparation of three-dimensional scaffolds via cryogelation and 3D printing approaches. The composition of particles-based ink for 3D printing was optimized in order to allow formation of stable materials. Both the modified-particle cytotoxicity and the matrix-supported cell adhesion were evaluated and visualized in order to confirm the perspectives of materials application.",
keywords = "поли(молочная кислота), нанокристаллическая целлюлоза, метакрилированиие, частицы, 3D печать, скаффолды, тканевая инженерия, poly(lactic acid), nanocrystalline cellulose, methacrylation, particles, 3D printing, scaffolds, tissue engineering",
author = "Mariia Leonovich and Viktor Korzhikov-Vlakh and Antonina Lavrentieva and Iliyana Pepelanova and Evgenia Korzhikova-Vlakh and Tatiana Tennikova",
note = "Leonovich, M.; Korzhikov-Vlakh, V.; Lavrentieva, A.; Pepelanova, I.; Korzhikova-Vlakh, E.; Tennikova, T. Poly(Lactic Acid) and Nanocrystalline Cellulose Methacrylated Particles for Preparation of Cryogelated and 3D-Printed Scaffolds for Tissue Engineering. Polymers 2023, 15, 651. https://doi.org/10.3390/polym15030651",
year = "2023",
month = jan,
day = "27",
doi = "10.3390/polym15030651",
language = "English",
volume = "15",
journal = "Polymers",
issn = "2073-4360",
publisher = "MDPI AG",
number = "3",

}

RIS

TY - JOUR

T1 - Poly(Lactic Acid) and Nanocrystalline Cellulose Methacrylated Particles for Preparation of Cryogelated and 3D-Printed Scaffolds for Tissue Engineering

AU - Leonovich , Mariia

AU - Korzhikov-Vlakh, Viktor

AU - Lavrentieva , Antonina

AU - Pepelanova, Iliyana

AU - Korzhikova-Vlakh , Evgenia

AU - Tennikova, Tatiana

N1 - Leonovich, M.; Korzhikov-Vlakh, V.; Lavrentieva, A.; Pepelanova, I.; Korzhikova-Vlakh, E.; Tennikova, T. Poly(Lactic Acid) and Nanocrystalline Cellulose Methacrylated Particles for Preparation of Cryogelated and 3D-Printed Scaffolds for Tissue Engineering. Polymers 2023, 15, 651. https://doi.org/10.3390/polym15030651

PY - 2023/1/27

Y1 - 2023/1/27

N2 - Different parts of bones possess different properties, such as the capacity for remodeling cell content, porosity, and protein composition. For various traumatic or surgical tissue defects, the application of tissue-engineered constructs seems to be a promising strategy. Despite significant research efforts, such constructs are still rarely available in the clinic. One of the reasons is the lack of resorbable materials, whose properties can be adjusted according to the intended tissue or tissue contacts. Here, we present our first results on the development of a toolbox, by which the scaffolds with easily tunable mechanical and biological properties could be prepared. Biodegradable poly(lactic acid) and nanocrystalline cellulose methacrylated particles were obtained, characterized, and used for preparation of three-dimensional scaffolds via cryogelation and 3D printing approaches. The composition of particles-based ink for 3D printing was optimized in order to allow formation of stable materials. Both the modified-particle cytotoxicity and the matrix-supported cell adhesion were evaluated and visualized in order to confirm the perspectives of materials application.

AB - Different parts of bones possess different properties, such as the capacity for remodeling cell content, porosity, and protein composition. For various traumatic or surgical tissue defects, the application of tissue-engineered constructs seems to be a promising strategy. Despite significant research efforts, such constructs are still rarely available in the clinic. One of the reasons is the lack of resorbable materials, whose properties can be adjusted according to the intended tissue or tissue contacts. Here, we present our first results on the development of a toolbox, by which the scaffolds with easily tunable mechanical and biological properties could be prepared. Biodegradable poly(lactic acid) and nanocrystalline cellulose methacrylated particles were obtained, characterized, and used for preparation of three-dimensional scaffolds via cryogelation and 3D printing approaches. The composition of particles-based ink for 3D printing was optimized in order to allow formation of stable materials. Both the modified-particle cytotoxicity and the matrix-supported cell adhesion were evaluated and visualized in order to confirm the perspectives of materials application.

KW - поли(молочная кислота)

KW - нанокристаллическая целлюлоза

KW - метакрилированиие

KW - частицы

KW - 3D печать

KW - скаффолды

KW - тканевая инженерия

KW - poly(lactic acid)

KW - nanocrystalline cellulose

KW - methacrylation

KW - particles

KW - 3D printing

KW - scaffolds

KW - tissue engineering

UR - https://www.mdpi.com/2073-4360/15/3/651

UR - https://www.mendeley.com/catalogue/17397031-a0a5-37ee-8dac-b146be48420a/

U2 - 10.3390/polym15030651

DO - 10.3390/polym15030651

M3 - Article

VL - 15

JO - Polymers

JF - Polymers

SN - 2073-4360

IS - 3

M1 - 651

ER -

ID: 102457225