Modeling of Metal Flow during Processing by Multi-ECAP-Conform

Standard

Modeling of Metal Flow during Processing by Multi-ECAP-Conform. / Fakhretdinova, E.I.; Raab, G.I.; Valiev, R.Z.

In: Advanced Engineering Materials, No. 12, 2015, p. 1723-1727.

Research output: Contribution to journal › Article

Author

Fakhretdinova, E.I. ; Raab, G.I. ; Valiev, R.Z. / Modeling of Metal Flow during Processing by Multi-ECAP-Conform. In: Advanced Engineering Materials. 2015 ; No. 12. pp. 1723-1727.

BibTeX

@article{b271a436080345109c47e8384ab03012,

title = "Modeling of Metal Flow during Processing by Multi-ECAP-Conform",

abstract = "{\textcopyright} 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.This article presents the results of a computer modeling study of a new technique of severe plastic deformation called Multi-ECAP-Conform, ensuring a high level of strain value ei ≥ 3 per one processing pass of a billet from an Al alloy. The main feature of this technique is multi-stage successive shear straining of a long-length billet under the conditions of equal-channel angular pressing (ECAP) via the Conform mode. The main area of investigation is the study of the effect of the geometry of channels and channels intersection angles on the homogeneity of the strained state, all other conditions being equal. A rational combination of the channels geometry has been established that provides for a homogeneous strained state of billets and allowable force conditions of processing.",

author = "E.I. Fakhretdinova and G.I. Raab and R.Z. Valiev",

year = "2015",

doi = "10.1002/adem.201500125",

language = "English",

pages = "1723--1727",

journal = "Advanced Engineering Materials",

issn = "1438-1656",

publisher = "Wiley-Blackwell",

number = "12",

}

RIS

TY - JOUR

T1 - Modeling of Metal Flow during Processing by Multi-ECAP-Conform

AU - Fakhretdinova, E.I.

AU - Raab, G.I.

AU - Valiev, R.Z.

PY - 2015

Y1 - 2015

N2 - © 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.This article presents the results of a computer modeling study of a new technique of severe plastic deformation called Multi-ECAP-Conform, ensuring a high level of strain value ei ≥ 3 per one processing pass of a billet from an Al alloy. The main feature of this technique is multi-stage successive shear straining of a long-length billet under the conditions of equal-channel angular pressing (ECAP) via the Conform mode. The main area of investigation is the study of the effect of the geometry of channels and channels intersection angles on the homogeneity of the strained state, all other conditions being equal. A rational combination of the channels geometry has been established that provides for a homogeneous strained state of billets and allowable force conditions of processing.

AB - © 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.This article presents the results of a computer modeling study of a new technique of severe plastic deformation called Multi-ECAP-Conform, ensuring a high level of strain value ei ≥ 3 per one processing pass of a billet from an Al alloy. The main feature of this technique is multi-stage successive shear straining of a long-length billet under the conditions of equal-channel angular pressing (ECAP) via the Conform mode. The main area of investigation is the study of the effect of the geometry of channels and channels intersection angles on the homogeneity of the strained state, all other conditions being equal. A rational combination of the channels geometry has been established that provides for a homogeneous strained state of billets and allowable force conditions of processing.

U2 - 10.1002/adem.201500125

DO - 10.1002/adem.201500125

M3 - Article

SP - 1723

EP - 1727

JO - Advanced Engineering Materials

JF - Advanced Engineering Materials

SN - 1438-1656

IS - 12

ER -

ID: 4000856