Standard

Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. / Karavaeva, M.V.; Kiseleva, S.K.; Abramova, M.M.; Ganeev, A.V.; Valiev, R.Z.

Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. 2014.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Harvard

Karavaeva, MV, Kiseleva, SK, Abramova, MM, Ganeev, AV & Valiev, RZ 2014, Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. in Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. https://doi.org/10.1088/1757-899X/63/1/012056

APA

Karavaeva, M. V., Kiseleva, S. K., Abramova, M. M., Ganeev, A. V., & Valiev, R. Z. (2014). Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. In Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation https://doi.org/10.1088/1757-899X/63/1/012056

Vancouver

Karavaeva MV, Kiseleva SK, Abramova MM, Ganeev AV, Valiev RZ. Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. In Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. 2014 https://doi.org/10.1088/1757-899X/63/1/012056

Author

Karavaeva, M.V. ; Kiseleva, S.K. ; Abramova, M.M. ; Ganeev, A.V. ; Valiev, R.Z. / Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation. 2014.

BibTeX

@inproceedings{e49385d588524bef870b8a1165b9e411,
title = "Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation",
abstract = "The paper deals with two-stage processing of medium-carbon steel 45 (0.45 % C; 0.27 % Si; 0.65 % Mn) via quenching and high pressure torsion. Such processing combination allowed producing a nanocomposite microstructure with a ferrite matrix and high-dispersed carbides. The ultimate tensile strength of the nanostructured steel is over 2500 MPa. The processing effect on the structure, mechanical properties and failure mechanisms of steel 45 samples is studied. The peculiarities of static fractures in the samples after HPT are demonstrated in comparison with those after quenching. {\textcopyright} Published under licence by IOP Publishing Ltd.",
author = "M.V. Karavaeva and S.K. Kiseleva and M.M. Abramova and A.V. Ganeev and R.Z. Valiev",
year = "2014",
doi = "10.1088/1757-899X/63/1/012056",
language = "English",
booktitle = "Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation",

}

RIS

TY - GEN

T1 - Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation

AU - Karavaeva, M.V.

AU - Kiseleva, S.K.

AU - Abramova, M.M.

AU - Ganeev, A.V.

AU - Valiev, R.Z.

PY - 2014

Y1 - 2014

N2 - The paper deals with two-stage processing of medium-carbon steel 45 (0.45 % C; 0.27 % Si; 0.65 % Mn) via quenching and high pressure torsion. Such processing combination allowed producing a nanocomposite microstructure with a ferrite matrix and high-dispersed carbides. The ultimate tensile strength of the nanostructured steel is over 2500 MPa. The processing effect on the structure, mechanical properties and failure mechanisms of steel 45 samples is studied. The peculiarities of static fractures in the samples after HPT are demonstrated in comparison with those after quenching. © Published under licence by IOP Publishing Ltd.

AB - The paper deals with two-stage processing of medium-carbon steel 45 (0.45 % C; 0.27 % Si; 0.65 % Mn) via quenching and high pressure torsion. Such processing combination allowed producing a nanocomposite microstructure with a ferrite matrix and high-dispersed carbides. The ultimate tensile strength of the nanostructured steel is over 2500 MPa. The processing effect on the structure, mechanical properties and failure mechanisms of steel 45 samples is studied. The peculiarities of static fractures in the samples after HPT are demonstrated in comparison with those after quenching. © Published under licence by IOP Publishing Ltd.

U2 - 10.1088/1757-899X/63/1/012056

DO - 10.1088/1757-899X/63/1/012056

M3 - Conference contribution

BT - Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation

ER -

ID: 7037719