TY - JOUR

T1 - Influence of the Preparation Technique on the Magnetic Characteristics of ε-Fe2O3-Based Composites

AU - Testov, Dmitriy O.

AU - Gareev, Kamil G.

AU - Khmelnitskiy, Ivan K.

AU - Kosterov, Andrei

AU - Surovitskii, Leonid

AU - Luchinin, Victor V.

N1 - Testov, D.O.; Gareev, K.G.; Khmelnitskiy, I.K.; Kosterov, A.; Surovitskii, L.; Luchinin, V.V. Influence of the Preparation Technique on the Magnetic Characteristics of ε-Fe2O3-Based Composites. Magnetochemistry 2023, 9, 10. https://doi.org/10.3390/magnetochemistry9010010

PY - 2023

Y1 - 2023

N2 - ε-Fe2O3 is an iron(III) oxide polymorph attracting an increasing interest due to its unique magnetic properties combining extremely high coercivity and relatively large saturation magnetization. We review existing methods for the ε-Fe2O3 synthesis focusing on synthesis speed, repeatability, manufacturability and purity of the final product. Samples of ε-Fe2O3 have been synthesized using the two methods that appear the most promising: silica gel impregnation and microemulsion. In both cases, ε-Fe2O3 and α-Fe2O3 are present in the final product as attested by X-ray diffraction patterns and magnetic properties (maximum coercive force at 300 K~1 Tesla). Two different precursors, iron(III) nitrate and iron(II) sulfate, have been used in the silica gel impregnation method. Somewhat surprisingly, iron sulfate proved superior yielding ε-Fe2O3 content of 69% in the total iron oxide product, compared to 25% for iron nitrate under the same synthesis conditions. These results pave the way for modifying the existing ε-Fe2O3 synthesis methods aiming to increase the content of the epsilon phase in the final product and, consequently, improve its physicochemical properties.

AB - ε-Fe2O3 is an iron(III) oxide polymorph attracting an increasing interest due to its unique magnetic properties combining extremely high coercivity and relatively large saturation magnetization. We review existing methods for the ε-Fe2O3 synthesis focusing on synthesis speed, repeatability, manufacturability and purity of the final product. Samples of ε-Fe2O3 have been synthesized using the two methods that appear the most promising: silica gel impregnation and microemulsion. In both cases, ε-Fe2O3 and α-Fe2O3 are present in the final product as attested by X-ray diffraction patterns and magnetic properties (maximum coercive force at 300 K~1 Tesla). Two different precursors, iron(III) nitrate and iron(II) sulfate, have been used in the silica gel impregnation method. Somewhat surprisingly, iron sulfate proved superior yielding ε-Fe2O3 content of 69% in the total iron oxide product, compared to 25% for iron nitrate under the same synthesis conditions. These results pave the way for modifying the existing ε-Fe2O3 synthesis methods aiming to increase the content of the epsilon phase in the final product and, consequently, improve its physicochemical properties.

KW - iron(III) oxide

KW - polymorphism

KW - synthesis

KW - magnetic materials

KW - high coercive force

UR - https://www.mendeley.com/catalogue/c1b52560-711c-3a4c-9c60-3853b4e81638/

U2 - 10.3390/magnetochemistry9010010

DO - 10.3390/magnetochemistry9010010

M3 - Article

VL - 9

JO - Magnetochemistry

JF - Magnetochemistry

SN - 2312-7481

IS - 1

M1 - 10

ER -