Standard

In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing. / Panov, Maxim S.; Grishankina , Anastasiia E. ; Stupin, Daniil D. ; Lihachev , Alexey I. ; Mironov, Vladimir N. ; Strashkov , Daniil M. ; Khairullina , Evgeniia M. ; Tumkin , Ilya I. ; Ryazantsev , Mikhail N. .

In: Materials, Vol. 13, No. 23, 5385, 12.2020.

Research output: Contribution to journal › Article › peer-review

Harvard

Panov, MS, Grishankina , AE, Stupin, DD, Lihachev , AI, Mironov, VN, Strashkov , DM, Khairullina , EM, Tumkin , II & Ryazantsev , MN 2020, 'In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing', Materials, vol. 13, no. 23, 5385. https://doi.org/10.3390/ma13235385

APA

Panov, M. S., Grishankina , A. E., Stupin, D. D., Lihachev , A. I., Mironov, V. N., Strashkov , D. M., Khairullina , E. M., Tumkin , I. I., & Ryazantsev , M. N. (2020). In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing. Materials, 13(23), [5385]. https://doi.org/10.3390/ma13235385

Vancouver

Panov MS, Grishankina AE, Stupin DD, Lihachev AI, Mironov VN, Strashkov DM et al. In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing. Materials. 2020 Dec;13(23). 5385. https://doi.org/10.3390/ma13235385

Author

Panov, Maxim S. ; Grishankina , Anastasiia E. ; Stupin, Daniil D. ; Lihachev , Alexey I. ; Mironov, Vladimir N. ; Strashkov , Daniil M. ; Khairullina , Evgeniia M. ; Tumkin , Ilya I. ; Ryazantsev , Mikhail N. . / In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing. In: Materials. 2020 ; Vol. 13, No. 23.

BibTeX

@article{a1a9293690374b9bb355c173ee53b563,
title = "In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing",
abstract = "In this paper, we propose a fast and simple approach for the fabrication of the electrocatalytically active ruthenium-containing microstructures using a laser-induced metal deposition technique. The results of scanning electron microscopy and electrical impedance spectroscopy (EIS) demonstrate that the fabricated ruthenium-based microelectrode had a highly developed surface composed of 10 mu m pores and 10 nm zigzag cracks. The fabricated material exhibited excellent electrochemical properties toward non-enzymatic dopamine sensing, including high sensitivity (858.5 and 509.1 mu A mM(-1) cm(-2)), a low detection limit (0.13 and 0.15 mu M), as well as good selectivity and stability.",
keywords = "laser-induced metal deposition, ruthenium, dopamine, non-enzymatic sensors, Dopamine, Laser-induced metal deposition, Non-enzymatic sensors, Ruthenium",
author = "Panov, {Maxim S.} and Grishankina, {Anastasiia E.} and Stupin, {Daniil D.} and Lihachev, {Alexey I.} and Mironov, {Vladimir N.} and Strashkov, {Daniil M.} and Khairullina, {Evgeniia M.} and Tumkin, {Ilya I.} and Ryazantsev, {Mikhail N.}",
note = "Funding Information: Funding: The work was funded by the Russian Science Foundation (RSF), grant No. 20-13-00303. Publisher Copyright: {\textcopyright} 2020 by the authors. Licensee MDPI, Basel, Switzerland.",
year = "2020",
month = dec,
doi = "10.3390/ma13235385",
language = "Английский",
volume = "13",
journal = "Materials",
issn = "1996-1944",
publisher = "MDPI AG",
number = "23",

}

RIS

TY - JOUR

T1 - In Situ Laser-Induced Fabrication of a Ruthenium-Based Microelectrode for Non-Enzymatic Dopamine Sensing

AU - Panov, Maxim S.

AU - Grishankina , Anastasiia E.

AU - Stupin, Daniil D.

AU - Lihachev , Alexey I.

AU - Mironov, Vladimir N.

AU - Strashkov , Daniil M.

AU - Khairullina , Evgeniia M.

AU - Tumkin , Ilya I.

AU - Ryazantsev , Mikhail N.

N1 - Funding Information: Funding: The work was funded by the Russian Science Foundation (RSF), grant No. 20-13-00303. Publisher Copyright: © 2020 by the authors. Licensee MDPI, Basel, Switzerland.

PY - 2020/12

Y1 - 2020/12

N2 - In this paper, we propose a fast and simple approach for the fabrication of the electrocatalytically active ruthenium-containing microstructures using a laser-induced metal deposition technique. The results of scanning electron microscopy and electrical impedance spectroscopy (EIS) demonstrate that the fabricated ruthenium-based microelectrode had a highly developed surface composed of 10 mu m pores and 10 nm zigzag cracks. The fabricated material exhibited excellent electrochemical properties toward non-enzymatic dopamine sensing, including high sensitivity (858.5 and 509.1 mu A mM(-1) cm(-2)), a low detection limit (0.13 and 0.15 mu M), as well as good selectivity and stability.

AB - In this paper, we propose a fast and simple approach for the fabrication of the electrocatalytically active ruthenium-containing microstructures using a laser-induced metal deposition technique. The results of scanning electron microscopy and electrical impedance spectroscopy (EIS) demonstrate that the fabricated ruthenium-based microelectrode had a highly developed surface composed of 10 mu m pores and 10 nm zigzag cracks. The fabricated material exhibited excellent electrochemical properties toward non-enzymatic dopamine sensing, including high sensitivity (858.5 and 509.1 mu A mM(-1) cm(-2)), a low detection limit (0.13 and 0.15 mu M), as well as good selectivity and stability.

KW - laser-induced metal deposition

KW - ruthenium

KW - dopamine

KW - non-enzymatic sensors

KW - Dopamine

KW - Laser-induced metal deposition

KW - Non-enzymatic sensors

KW - Ruthenium

UR - https://www.mdpi.com/1996-1944/13/23/5385м

UR - http://www.scopus.com/inward/record.url?scp=85096678972&partnerID=8YFLogxK

U2 - 10.3390/ma13235385

DO - 10.3390/ma13235385

M3 - статья

VL - 13

JO - Materials

JF - Materials

SN - 1996-1944

IS - 23

M1 - 5385

ER -

ID: 71207187