Research output: Contribution to journal › Article › peer-review
3D SIMULATION STUDY AND OPTIMIZATION OF MAGNETIC SYSTEM OF DECRIS ION SOURCE WITH THE PUMPING FREQUENCY 28 GHz. / Amoskov, V.; Gapionok, E.; Kukhtin, V.; Labusov, A.; Lamzin, E.; Makarov, A.; Rodin, I.; Safonov, A.; Shatil, N.; Stepanov, D.; Zapretilina, E.; Bogomolov, S.; Efremov, A.; Sytchevsky, S.
In: CERN-Proceedings, Vol. 2021-September, 01.01.2021, p. 300-302.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - 3D SIMULATION STUDY AND OPTIMIZATION OF MAGNETIC SYSTEM OF DECRIS ION SOURCE WITH THE PUMPING FREQUENCY 28 GHz
AU - Amoskov, V.
AU - Gapionok, E.
AU - Kukhtin, V.
AU - Labusov, A.
AU - Lamzin, E.
AU - Makarov, A.
AU - Rodin, I.
AU - Safonov, A.
AU - Shatil, N.
AU - Stepanov, D.
AU - Zapretilina, E.
AU - Bogomolov, S.
AU - Efremov, A.
AU - Sytchevsky, S.
PY - 2021/1/1
Y1 - 2021/1/1
N2 - A superconducting magnet system for a 28 GHz ECR ion source (DECRIS) was studied in order to select its parameters and optimize performance. Parametric magnetic models were performed for two design configurations, conventional ("sextupole-in-solenoid") and reversed ("solenoid-in-sextupole"). For both configurations, the magnetic effect of the booster and the steel poles on the magnet performance was investigated from the point of view of critical parameters of the system - currents, fields, and forces. Results of the parametric computations were used to optimize the geometry and sizes of the magnet as well as the magnetic shield, the booster, and the poles. A comparison of the obtained parameters was used to select the candidate magnet configuration for further design and manufacture.
AB - A superconducting magnet system for a 28 GHz ECR ion source (DECRIS) was studied in order to select its parameters and optimize performance. Parametric magnetic models were performed for two design configurations, conventional ("sextupole-in-solenoid") and reversed ("solenoid-in-sextupole"). For both configurations, the magnetic effect of the booster and the steel poles on the magnet performance was investigated from the point of view of critical parameters of the system - currents, fields, and forces. Results of the parametric computations were used to optimize the geometry and sizes of the magnet as well as the magnetic shield, the booster, and the poles. A comparison of the obtained parameters was used to select the candidate magnet configuration for further design and manufacture.
UR - http://www.scopus.com/inward/record.url?scp=85130354261&partnerID=8YFLogxK
U2 - 10.18429/JACoW-RuPAC2021-TUPSB35
DO - 10.18429/JACoW-RuPAC2021-TUPSB35
M3 - Article
AN - SCOPUS:85130354261
VL - 2021-September
SP - 300
EP - 302
JO - CERN-Proceedings
JF - CERN-Proceedings
SN - 2078-8835
ER -
ID: 127593876