The strength and stability of nanoplates with holes and inclusions

Результат исследований: Материалы конференцийматериалырецензирование


The stability problems of thin plates with different defects such as holes, inclusions and cracks under tension are investigated. Loss of planar form of deformation occurs due to the formation of compressive stress zones near defects. By the study of deformation and stability of plates of nanometer thickness should be taken into account the effect of surface stresses acting on the faces of the plate. With the decrease of thickness the surface stresses they could significantly change the bending stiffness of the plate and correspondingly the critical load at which the planar shape of deformation is lost. In this work we study the following problems of stability of thin plates under tension: the plate with circular hole, the infinite plate with circular inclusion, the ring-shaped plate, which is expanded of external forces, the infinite plate with the system of parallel cracks. The analytical results are compared with results of finite element modeling.

Язык оригиналаанглийский
Число страниц2
СостояниеОпубликовано - 1 янв 2017
Событие14th International Conference on Fracture, ICF 2017 - Rhodes, Греция
Продолжительность: 18 июн 201720 июн 2017


конференция14th International Conference on Fracture, ICF 2017

Предметные области Scopus

  • Городское и структурное проектирование
  • Строительство

Fingerprint Подробные сведения о темах исследования «The strength and stability of nanoplates with holes and inclusions». Вместе они формируют уникальный семантический отпечаток (fingerprint).