To date, it has been reliably shown by direct methods that a sessile droplet on a solid surface causes deformation of the substrate. For solids with rather low elasticity moduli, in particular, elastomers, this phenomenon becomes observable, and the deformation work reaches values sufficiently large to take it into account in the theory when necessary. Within the framework of the current theory of capillarity and the generalized Young equation, it is most convenient to introduce the deformation work (realized along and inside the three-phase contact line) into the line tension. The resultant effective line tension is several orders of magnitude higher than the usual one (for undeformable solids); therefore, it manifests itself even in macroscopic (although small) droplets. While the usual line tension is just a small correction to the classical Young equation, when elastomers are used as substrates, the effective line tension may become the main term and govern surface phenomena. In this communication, the results of work [Budziak, C.J., Varcha-Butler, E.I., and Neumann, A.W., J. Appl. Polym. Sci., 1991, vol. 42, p. 1959], which is devoted to studying the temperature dependence of liquid contact angles at elastomers, are discussed from the aforementioned points of view. The following facts have been explained: the higher the surface tension of a liquid the larger the contact angle at the same substrate; most probably, the contact angle increases with temperature; the temperature dependence of a contact angle cannot be strong because of the mutual compensation of the temperature dependences of the surface tension of a wetting liquid and the elasticity modulus of an elastomeric substrate.
Предметные области Scopus
- Поверхности и интерфейсы
- Физическая и теоретическая химия
- Коллоидная химия и химия поверхности