Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability

M. V. Karavaeva, S. K. Kiseleva, A. V. Ganeev, E. O. Protasova, M. M. Ganiev, L. A. Simonova, R. Z. Valiev

Результат исследований: Научные публикации в периодических изданияхстатьянаучнаярецензирование

12 Цитирования (Scopus)

Выдержка

The paper presents the results of a study on the microstructure and mechanical properties of a medium-carbon steel (0.45 % C) processed by severe plastic deformation (SPD) via high-pressure torsion (HPT). Martensite quenching was first applied to the material, and then HPT processing was conducted at a temperature of 350 °C. As a result, a nanocomposite type microstructure is formed: an ultrafine-grained (UFG) ferrite matrix with fine cementite particles located predominantly at the boundaries of ferrite grains. The processed steel is characterized by a high-strength state, with an ultimate tensile strength over 2500 MPa. Special attention is given to analysis of the thermal stability of the microstructure and properties of the steel after HPT processing in comparison with quenching. It is shown that the thermal stability of the UFG structure produced by HPT is visibly higher than that of quenching-induced martensite. The origin of the enhanced strength and thermal stability of the UFG steel is discussed.

Язык оригиналаанглийский
Страницы (с-по)6730-6738
Число страниц9
ЖурналJournal of Materials Science
Том50
Номер выпуска20
DOI
СостояниеОпубликовано - 27 окт 2015

Предметные области Scopus

  • Материаловедение (все)
  • Сопротивление материалов
  • Общее машиностроение

Цитировать

Karavaeva, M. V. ; Kiseleva, S. K. ; Ganeev, A. V. ; Protasova, E. O. ; Ganiev, M. M. ; Simonova, L. A. ; Valiev, R. Z. / Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability. В: Journal of Materials Science. 2015 ; Том 50, № 20. стр. 6730-6738.
@article{8daf6672d8f548d9a98ccbd8d837e233,
title = "Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability",
abstract = "The paper presents the results of a study on the microstructure and mechanical properties of a medium-carbon steel (0.45 {\%} C) processed by severe plastic deformation (SPD) via high-pressure torsion (HPT). Martensite quenching was first applied to the material, and then HPT processing was conducted at a temperature of 350 °C. As a result, a nanocomposite type microstructure is formed: an ultrafine-grained (UFG) ferrite matrix with fine cementite particles located predominantly at the boundaries of ferrite grains. The processed steel is characterized by a high-strength state, with an ultimate tensile strength over 2500 MPa. Special attention is given to analysis of the thermal stability of the microstructure and properties of the steel after HPT processing in comparison with quenching. It is shown that the thermal stability of the UFG structure produced by HPT is visibly higher than that of quenching-induced martensite. The origin of the enhanced strength and thermal stability of the UFG steel is discussed.",
author = "Karavaeva, {M. V.} and Kiseleva, {S. K.} and Ganeev, {A. V.} and Protasova, {E. O.} and Ganiev, {M. M.} and Simonova, {L. A.} and Valiev, {R. Z.}",
year = "2015",
month = "10",
day = "27",
doi = "10.1007/s10853-015-9227-2",
language = "English",
volume = "50",
pages = "6730--6738",
journal = "Journal of Materials Science",
issn = "0022-2461",
publisher = "Springer",
number = "20",

}

Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability. / Karavaeva, M. V.; Kiseleva, S. K.; Ganeev, A. V.; Protasova, E. O.; Ganiev, M. M.; Simonova, L. A.; Valiev, R. Z.

В: Journal of Materials Science, Том 50, № 20, 27.10.2015, стр. 6730-6738.

Результат исследований: Научные публикации в периодических изданияхстатьянаучнаярецензирование

TY - JOUR

T1 - Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability

AU - Karavaeva, M. V.

AU - Kiseleva, S. K.

AU - Ganeev, A. V.

AU - Protasova, E. O.

AU - Ganiev, M. M.

AU - Simonova, L. A.

AU - Valiev, R. Z.

PY - 2015/10/27

Y1 - 2015/10/27

N2 - The paper presents the results of a study on the microstructure and mechanical properties of a medium-carbon steel (0.45 % C) processed by severe plastic deformation (SPD) via high-pressure torsion (HPT). Martensite quenching was first applied to the material, and then HPT processing was conducted at a temperature of 350 °C. As a result, a nanocomposite type microstructure is formed: an ultrafine-grained (UFG) ferrite matrix with fine cementite particles located predominantly at the boundaries of ferrite grains. The processed steel is characterized by a high-strength state, with an ultimate tensile strength over 2500 MPa. Special attention is given to analysis of the thermal stability of the microstructure and properties of the steel after HPT processing in comparison with quenching. It is shown that the thermal stability of the UFG structure produced by HPT is visibly higher than that of quenching-induced martensite. The origin of the enhanced strength and thermal stability of the UFG steel is discussed.

AB - The paper presents the results of a study on the microstructure and mechanical properties of a medium-carbon steel (0.45 % C) processed by severe plastic deformation (SPD) via high-pressure torsion (HPT). Martensite quenching was first applied to the material, and then HPT processing was conducted at a temperature of 350 °C. As a result, a nanocomposite type microstructure is formed: an ultrafine-grained (UFG) ferrite matrix with fine cementite particles located predominantly at the boundaries of ferrite grains. The processed steel is characterized by a high-strength state, with an ultimate tensile strength over 2500 MPa. Special attention is given to analysis of the thermal stability of the microstructure and properties of the steel after HPT processing in comparison with quenching. It is shown that the thermal stability of the UFG structure produced by HPT is visibly higher than that of quenching-induced martensite. The origin of the enhanced strength and thermal stability of the UFG steel is discussed.

UR - http://www.scopus.com/inward/record.url?scp=84938990732&partnerID=8YFLogxK

U2 - 10.1007/s10853-015-9227-2

DO - 10.1007/s10853-015-9227-2

M3 - Article

VL - 50

SP - 6730

EP - 6738

JO - Journal of Materials Science

JF - Journal of Materials Science

SN - 0022-2461

IS - 20

ER -