Nanostructures and microhardness in Al and Al-Mg alloys subjected to SPD

H. J. Roven, M. Liu, M. Murashkin, R. Z. Valiev, A. R. Kilmametov, T. Ungár, L. Balogh

Результат исследований: Научные публикации в периодических изданияхстатья в журнале по материалам конференции

10 Цитирования (Scopus)

Выдержка

Nanostructures and microhardness of a commercial purity Al, three binary Al-Mg alloys and a commercial AA5182 alloy subjected to high pressure torsion (HPT) at room temperature were comparatively investigated using high-resolution transmission electron microscopy, X-ray diffraction (XRD) and high-resolution XRD line profile analysis. The hardness values of HPT samples are twice to three times larger than that of the undeformed counterparts. Grain sizes measured by XRD are in the range 10-200 nm with typical average values ranging from 46 to 120 nm. The hardness values and the dislocation densities increased, whereas, the average grain size decreased significantly with increasing Mg contents. Typical dislocation densities are in the range 1.7 × 1014 m-2- 2.3 x 1015 m-2. However, local densities in grain boundary and triple junction areas might be as high as 1017 m-2. The strengthening mechanisms contributing to high hardness may primarily be attributed to the cooperative interactions of high dislocation densities, grain boundaries and planar interfaces.

Язык оригиналаанглийский
Страницы (с-по)179-185
Число страниц7
ЖурналMaterials Science Forum
Том604-605
DOI
СостояниеОпубликовано - 17 апр 2009
СобытиеInternational Conference Recent Developments in the Processing and Applications of Structural Metals and Alloys - Ancona, Италия
Продолжительность: 22 июн 200825 июн 2008

Отпечаток

Microhardness
microhardness
Nanostructures
Hardness
X ray diffraction
Torsional stress
hardness
Grain boundaries
torsion
grain boundaries
grain size
diffraction
High resolution transmission electron microscopy
Dislocations (crystals)
x rays
high resolution
purity
transmission electron microscopy
room temperature
profiles

Предметные области Scopus

  • Материаловедение (все)
  • Физика конденсатов
  • Сопротивление материалов
  • Общее машиностроение

Цитировать

Roven, H. J., Liu, M., Murashkin, M., Valiev, R. Z., Kilmametov, A. R., Ungár, T., & Balogh, L. (2009). Nanostructures and microhardness in Al and Al-Mg alloys subjected to SPD. Materials Science Forum, 604-605, 179-185. https://doi.org/10.4028/3-908453-09-7
Roven, H. J. ; Liu, M. ; Murashkin, M. ; Valiev, R. Z. ; Kilmametov, A. R. ; Ungár, T. ; Balogh, L. / Nanostructures and microhardness in Al and Al-Mg alloys subjected to SPD. В: Materials Science Forum. 2009 ; Том 604-605. стр. 179-185.
@article{6f05ad5ee6d049bb91cddab45d1cb4a0,
title = "Nanostructures and microhardness in Al and Al-Mg alloys subjected to SPD",
abstract = "Nanostructures and microhardness of a commercial purity Al, three binary Al-Mg alloys and a commercial AA5182 alloy subjected to high pressure torsion (HPT) at room temperature were comparatively investigated using high-resolution transmission electron microscopy, X-ray diffraction (XRD) and high-resolution XRD line profile analysis. The hardness values of HPT samples are twice to three times larger than that of the undeformed counterparts. Grain sizes measured by XRD are in the range 10-200 nm with typical average values ranging from 46 to 120 nm. The hardness values and the dislocation densities increased, whereas, the average grain size decreased significantly with increasing Mg contents. Typical dislocation densities are in the range 1.7 × 1014 m-2- 2.3 x 1015 m-2. However, local densities in grain boundary and triple junction areas might be as high as 1017 m-2. The strengthening mechanisms contributing to high hardness may primarily be attributed to the cooperative interactions of high dislocation densities, grain boundaries and planar interfaces.",
keywords = "Aluminium alloys, Dislocation density, Hardness, High pressure torsion, Nanostructures, Severe plastic deformation",
author = "Roven, {H. J.} and M. Liu and M. Murashkin and Valiev, {R. Z.} and Kilmametov, {A. R.} and T. Ung{\'a}r and L. Balogh",
year = "2009",
month = "4",
day = "17",
doi = "10.4028/3-908453-09-7",
language = "English",
volume = "604-605",
pages = "179--185",
journal = "Materials Science Forum",
issn = "0255-5476",
publisher = "Trans Tech Publications Ltd",

}

Roven, HJ, Liu, M, Murashkin, M, Valiev, RZ, Kilmametov, AR, Ungár, T & Balogh, L 2009, 'Nanostructures and microhardness in Al and Al-Mg alloys subjected to SPD', Materials Science Forum, том. 604-605, стр. 179-185. https://doi.org/10.4028/3-908453-09-7

Nanostructures and microhardness in Al and Al-Mg alloys subjected to SPD. / Roven, H. J.; Liu, M.; Murashkin, M.; Valiev, R. Z.; Kilmametov, A. R.; Ungár, T.; Balogh, L.

В: Materials Science Forum, Том 604-605, 17.04.2009, стр. 179-185.

Результат исследований: Научные публикации в периодических изданияхстатья в журнале по материалам конференции

TY - JOUR

T1 - Nanostructures and microhardness in Al and Al-Mg alloys subjected to SPD

AU - Roven, H. J.

AU - Liu, M.

AU - Murashkin, M.

AU - Valiev, R. Z.

AU - Kilmametov, A. R.

AU - Ungár, T.

AU - Balogh, L.

PY - 2009/4/17

Y1 - 2009/4/17

N2 - Nanostructures and microhardness of a commercial purity Al, three binary Al-Mg alloys and a commercial AA5182 alloy subjected to high pressure torsion (HPT) at room temperature were comparatively investigated using high-resolution transmission electron microscopy, X-ray diffraction (XRD) and high-resolution XRD line profile analysis. The hardness values of HPT samples are twice to three times larger than that of the undeformed counterparts. Grain sizes measured by XRD are in the range 10-200 nm with typical average values ranging from 46 to 120 nm. The hardness values and the dislocation densities increased, whereas, the average grain size decreased significantly with increasing Mg contents. Typical dislocation densities are in the range 1.7 × 1014 m-2- 2.3 x 1015 m-2. However, local densities in grain boundary and triple junction areas might be as high as 1017 m-2. The strengthening mechanisms contributing to high hardness may primarily be attributed to the cooperative interactions of high dislocation densities, grain boundaries and planar interfaces.

AB - Nanostructures and microhardness of a commercial purity Al, three binary Al-Mg alloys and a commercial AA5182 alloy subjected to high pressure torsion (HPT) at room temperature were comparatively investigated using high-resolution transmission electron microscopy, X-ray diffraction (XRD) and high-resolution XRD line profile analysis. The hardness values of HPT samples are twice to three times larger than that of the undeformed counterparts. Grain sizes measured by XRD are in the range 10-200 nm with typical average values ranging from 46 to 120 nm. The hardness values and the dislocation densities increased, whereas, the average grain size decreased significantly with increasing Mg contents. Typical dislocation densities are in the range 1.7 × 1014 m-2- 2.3 x 1015 m-2. However, local densities in grain boundary and triple junction areas might be as high as 1017 m-2. The strengthening mechanisms contributing to high hardness may primarily be attributed to the cooperative interactions of high dislocation densities, grain boundaries and planar interfaces.

KW - Aluminium alloys

KW - Dislocation density

KW - Hardness

KW - High pressure torsion

KW - Nanostructures

KW - Severe plastic deformation

UR - http://www.scopus.com/inward/record.url?scp=60849135532&partnerID=8YFLogxK

U2 - 10.4028/3-908453-09-7

DO - 10.4028/3-908453-09-7

M3 - Conference article

AN - SCOPUS:60849135532

VL - 604-605

SP - 179

EP - 185

JO - Materials Science Forum

JF - Materials Science Forum

SN - 0255-5476

ER -

Roven HJ, Liu M, Murashkin M, Valiev RZ, Kilmametov AR, Ungár T и соавт. Nanostructures and microhardness in Al and Al-Mg alloys subjected to SPD. Materials Science Forum. 2009 Апр. 17;604-605:179-185. https://doi.org/10.4028/3-908453-09-7