Microstructure, Texture and Mechanical Properties of Titanium Grade 2 Processed by ECAP (Route C)

M. Wroński, K. Wierzbanowski, D. Wojtas, E. Szyfner, R. Z. Valiev, J. Kawałko, K. Berent, K. Sztwiertnia

Результат исследований: Научные публикации в периодических изданияхстатья

5 Цитирования (Scopus)

Аннотация

In the present work the properties of titanium grade 2 after ECAP processing with original route and regimes (route C, channel angle (Formula presented.) = 120°, deformation temperature 300 °C, number of passes up to 8) were examined. Texture development and microstructure parameters after ECAP processing and after recrystallization were determined using electron back scatter diffraction and analysed. A significant increase of the mechanical strength accompanied by some increase of ductility was observed in the deformed samples. The kernel average misorientation and average grain orientation spread were strongly increased after deformation, which confirms the material refinement and fragmentation. The proportion of low angle boundaries increased after four ECAP passes, but after four consecutive passes high angle grain boundaries became predominant. No deformation twins were observed after four and eight ECAP passes. The material recrystallized after deformation retained a fine grain microstructure. The textures of deformed and recrystallized samples were determined. It was found that texture after 8 passes is more homogeneous that that after 4 passes, which partly explains higher ductility of this first sample.

Язык оригиналаанглийский
Страницы (с-по)802-814
Число страниц13
ЖурналMetals and Materials International
Том24
Номер выпуска4
DOI
СостояниеОпубликовано - июл 2018

Предметные области Scopus

  • Физика конденсатов
  • Сопротивление материалов
  • Металлы и сплавы
  • Химия материалов

Fingerprint Подробные сведения о темах исследования «Microstructure, Texture and Mechanical Properties of Titanium Grade 2 Processed by ECAP (Route C)». Вместе они формируют уникальный семантический отпечаток (fingerprint).

Цитировать