Influence of the holding temperature on the kinetics of the isothermal B2 → B19′ transformation in TiNi-based shape memory alloy

E. Demidova, S. Belyaev, N. Resnina, A. Shelyakov

Research output

Abstract

The aim of the present paper was to study the kinetics of the isothermal B2 → B19′ transformation in the quaternary Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy in a wide temperature range to find the common features of this phenomenon in NiTi-based alloys. It was found that the isothermal B2 → B19′ martensitic transformation occurred during holding at a constant temperature both within and outside of the temperature range of the forward transformation. The holding temperature of T* influenced the maximum value of the martensite phase (ΦM) that appeared under isothermal condition and the rate of the martensite volume fraction variation. The maximum ΦM value of 80% was found when holding was at T* = Ms (the start temperature of the forward martensitic transformation on cooling), and it was two times larger than in quenched Ni51Ti49 alloy. An increase in holding temperature larger than Ms decreased the maximum ΦM value and the slope of the ΦM(t) curve. A decrease in the holding temperature less than Ms decreased the ΦM value and hardly influenced the dΦM/dt value. It was found that the variation in volume fraction of the martensite phase that appeared under isothermal holding at different temperatures in the Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy was close to the binary Ni51Ti49 alloy, and hence, it was concluded that the features of the kinetics of the isothermal B2 → B19′ transformation were common for this type of transformation in non-stoichiometric NiTi-based alloys.

Original languageEnglish
JournalJournal of Thermal Analysis and Calorimetry
DOIs
Publication statusPublished - 1 Jan 2019

Fingerprint

shape memory alloys
Shape memory effect
Kinetics
kinetics
martensite
Martensite
Temperature
temperature
Martensitic transformations
martensitic transformation
Volume fraction
quaternary alloys
Binary alloys
binary alloys
slopes
Cooling
cooling
curves

Scopus subject areas

  • Condensed Matter Physics
  • Metals and Alloys

Cite this

@article{5df44a5cc8f54eb5805278cb096a8fad,
title = "Influence of the holding temperature on the kinetics of the isothermal B2 → B19′ transformation in TiNi-based shape memory alloy",
abstract = "The aim of the present paper was to study the kinetics of the isothermal B2 → B19′ transformation in the quaternary Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy in a wide temperature range to find the common features of this phenomenon in NiTi-based alloys. It was found that the isothermal B2 → B19′ martensitic transformation occurred during holding at a constant temperature both within and outside of the temperature range of the forward transformation. The holding temperature of T* influenced the maximum value of the martensite phase (ΦM) that appeared under isothermal condition and the rate of the martensite volume fraction variation. The maximum ΦM value of 80{\%} was found when holding was at T* = Ms (the start temperature of the forward martensitic transformation on cooling), and it was two times larger than in quenched Ni51Ti49 alloy. An increase in holding temperature larger than Ms decreased the maximum ΦM value and the slope of the ΦM(t) curve. A decrease in the holding temperature less than Ms decreased the ΦM value and hardly influenced the dΦM/dt value. It was found that the variation in volume fraction of the martensite phase that appeared under isothermal holding at different temperatures in the Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy was close to the binary Ni51Ti49 alloy, and hence, it was concluded that the features of the kinetics of the isothermal B2 → B19′ transformation were common for this type of transformation in non-stoichiometric NiTi-based alloys.",
keywords = "Isothermal holding, Martensitic transformation, Shape memory alloys, TiNi-based alloys",
author = "E. Demidova and S. Belyaev and N. Resnina and A. Shelyakov",
year = "2019",
month = "1",
day = "1",
doi = "10.1007/s10973-019-08717-4",
language = "English",
journal = "Journal of Thermal Analysis and Calorimetry",
issn = "1388-6150",
publisher = "Springer",

}

TY - JOUR

T1 - Influence of the holding temperature on the kinetics of the isothermal B2 → B19′ transformation in TiNi-based shape memory alloy

AU - Demidova, E.

AU - Belyaev, S.

AU - Resnina, N.

AU - Shelyakov, A.

PY - 2019/1/1

Y1 - 2019/1/1

N2 - The aim of the present paper was to study the kinetics of the isothermal B2 → B19′ transformation in the quaternary Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy in a wide temperature range to find the common features of this phenomenon in NiTi-based alloys. It was found that the isothermal B2 → B19′ martensitic transformation occurred during holding at a constant temperature both within and outside of the temperature range of the forward transformation. The holding temperature of T* influenced the maximum value of the martensite phase (ΦM) that appeared under isothermal condition and the rate of the martensite volume fraction variation. The maximum ΦM value of 80% was found when holding was at T* = Ms (the start temperature of the forward martensitic transformation on cooling), and it was two times larger than in quenched Ni51Ti49 alloy. An increase in holding temperature larger than Ms decreased the maximum ΦM value and the slope of the ΦM(t) curve. A decrease in the holding temperature less than Ms decreased the ΦM value and hardly influenced the dΦM/dt value. It was found that the variation in volume fraction of the martensite phase that appeared under isothermal holding at different temperatures in the Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy was close to the binary Ni51Ti49 alloy, and hence, it was concluded that the features of the kinetics of the isothermal B2 → B19′ transformation were common for this type of transformation in non-stoichiometric NiTi-based alloys.

AB - The aim of the present paper was to study the kinetics of the isothermal B2 → B19′ transformation in the quaternary Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy in a wide temperature range to find the common features of this phenomenon in NiTi-based alloys. It was found that the isothermal B2 → B19′ martensitic transformation occurred during holding at a constant temperature both within and outside of the temperature range of the forward transformation. The holding temperature of T* influenced the maximum value of the martensite phase (ΦM) that appeared under isothermal condition and the rate of the martensite volume fraction variation. The maximum ΦM value of 80% was found when holding was at T* = Ms (the start temperature of the forward martensitic transformation on cooling), and it was two times larger than in quenched Ni51Ti49 alloy. An increase in holding temperature larger than Ms decreased the maximum ΦM value and the slope of the ΦM(t) curve. A decrease in the holding temperature less than Ms decreased the ΦM value and hardly influenced the dΦM/dt value. It was found that the variation in volume fraction of the martensite phase that appeared under isothermal holding at different temperatures in the Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy was close to the binary Ni51Ti49 alloy, and hence, it was concluded that the features of the kinetics of the isothermal B2 → B19′ transformation were common for this type of transformation in non-stoichiometric NiTi-based alloys.

KW - Isothermal holding

KW - Martensitic transformation

KW - Shape memory alloys

KW - TiNi-based alloys

UR - http://www.scopus.com/inward/record.url?scp=85071490369&partnerID=8YFLogxK

U2 - 10.1007/s10973-019-08717-4

DO - 10.1007/s10973-019-08717-4

M3 - Article

AN - SCOPUS:85071490369

JO - Journal of Thermal Analysis and Calorimetry

JF - Journal of Thermal Analysis and Calorimetry

SN - 1388-6150

ER -