Dynamic Strength Characteristics of Materials

Influence of the Specimen Size on Strain Rate

Research output: Contribution to journalArticleResearchpeer-review

Abstract

Test results are presented for an additive material prepared of acrylonitrile-butadiene-styrene on a 3D printer. Dynamic tension experiments have been carried out using a tower-type drop hammer with an accelerator. Data obtained from different specimens demonstrate that high-strain-rate tensile experiments are feasible if the working part of the specimen is decreased. A theoretical analysis of test data using the incubation time criterion has been performed, and it has been found that analytical results are in good agreement with experimental data.

Original languageEnglish
Pages (from-to)523-526
Number of pages4
JournalTechnical Physics
Volume64
Issue number4
DOIs
StatePublished - 1 Apr 2019

Keywords

  • TENSILE
  • BEHAVIOR
  • ABS

Scopus subject areas

  • Physics and Astronomy (miscellaneous)

Cite this

@article{a257c6abbe704f548981c94b5de86d21,
title = "Dynamic Strength Characteristics of Materials: Influence of the Specimen Size on Strain Rate",
abstract = "Test results are presented for an additive material prepared of acrylonitrile-butadiene-styrene on a 3D printer. Dynamic tension experiments have been carried out using a tower-type drop hammer with an accelerator. Data obtained from different specimens demonstrate that high-strain-rate tensile experiments are feasible if the working part of the specimen is decreased. A theoretical analysis of test data using the incubation time criterion has been performed, and it has been found that analytical results are in good agreement with experimental data.",
keywords = "TENSILE, BEHAVIOR, ABS",
author = "Evstifeev, {A. D.} and Volkov, {G. A.} and Chevrychkina, {A. A.} and Petrov, {Yu V.}",
year = "2019",
month = "4",
day = "1",
doi = "10.1134/S1063784219040091",
language = "English",
volume = "64",
pages = "523--526",
journal = "Technical Physics",
issn = "1063-7842",
publisher = "Pleiades Publishing",
number = "4",

}

Dynamic Strength Characteristics of Materials : Influence of the Specimen Size on Strain Rate. / Evstifeev, A. D.; Volkov, G. A.; Chevrychkina, A. A.; Petrov, Yu V.

In: Technical Physics, Vol. 64, No. 4, 01.04.2019, p. 523-526.

Research output: Contribution to journalArticleResearchpeer-review

TY - JOUR

T1 - Dynamic Strength Characteristics of Materials

T2 - Influence of the Specimen Size on Strain Rate

AU - Evstifeev, A. D.

AU - Volkov, G. A.

AU - Chevrychkina, A. A.

AU - Petrov, Yu V.

PY - 2019/4/1

Y1 - 2019/4/1

N2 - Test results are presented for an additive material prepared of acrylonitrile-butadiene-styrene on a 3D printer. Dynamic tension experiments have been carried out using a tower-type drop hammer with an accelerator. Data obtained from different specimens demonstrate that high-strain-rate tensile experiments are feasible if the working part of the specimen is decreased. A theoretical analysis of test data using the incubation time criterion has been performed, and it has been found that analytical results are in good agreement with experimental data.

AB - Test results are presented for an additive material prepared of acrylonitrile-butadiene-styrene on a 3D printer. Dynamic tension experiments have been carried out using a tower-type drop hammer with an accelerator. Data obtained from different specimens demonstrate that high-strain-rate tensile experiments are feasible if the working part of the specimen is decreased. A theoretical analysis of test data using the incubation time criterion has been performed, and it has been found that analytical results are in good agreement with experimental data.

KW - TENSILE

KW - BEHAVIOR

KW - ABS

UR - http://www.scopus.com/inward/record.url?scp=85066051880&partnerID=8YFLogxK

U2 - 10.1134/S1063784219040091

DO - 10.1134/S1063784219040091

M3 - Article

VL - 64

SP - 523

EP - 526

JO - Technical Physics

JF - Technical Physics

SN - 1063-7842

IS - 4

ER -