Bimetallic shape memory alloy composites produced by explosion welding: Structure and martensitic transformation

S. Belyaev, V. Rubanik, N. Resnina, V. Jr. Rubanik, E. Demidova, I. Lomakin

Research output: Contribution to journalArticleResearchpeer-review

5 Citations (Scopus)

Abstract

© 2016 Elsevier B.V. All rights reserved. The aim of the present work was a study of the influence of explosion welding on the grain structure, chemical composition, phase composition and phase transitions in bimetallic shape memory composites containing the TiNi shape memory alloy as an active layer and one of four alloys having different abilities to react with TiNi alloys as passive layer. Stainless steel was chosen as a non-reacted material, TiNi alloy was used as the alloy with close chemical composition, and Ti6Al4 V alloy and copper beryllium (C17200) alloy were chosen as materials which might react with TiNi alloy to form new phases. The results of the study showed that variations in the grain structure and properties of the layers in the bimetal composite depended on the ability of the alloys used for the production of these composites to react with TiNi alloys. If the alloys did not react with TiNi alloy, as in the case of stainless steel, the explosion welding resulted in significant plastic deform
Original languageEnglish
Pages (from-to)323-331
Number of pages10
JournalJournal of Materials Processing Technology
Volume234
DOIs
StatePublished - 2016

Scopus subject areas

  • Materials Science(all)

Cite this

@article{7b9dd1916a9042278c330aad4dafec22,
title = "Bimetallic shape memory alloy composites produced by explosion welding: Structure and martensitic transformation",
abstract = "{\circledC} 2016 Elsevier B.V. All rights reserved. The aim of the present work was a study of the influence of explosion welding on the grain structure, chemical composition, phase composition and phase transitions in bimetallic shape memory composites containing the TiNi shape memory alloy as an active layer and one of four alloys having different abilities to react with TiNi alloys as passive layer. Stainless steel was chosen as a non-reacted material, TiNi alloy was used as the alloy with close chemical composition, and Ti6Al4 V alloy and copper beryllium (C17200) alloy were chosen as materials which might react with TiNi alloy to form new phases. The results of the study showed that variations in the grain structure and properties of the layers in the bimetal composite depended on the ability of the alloys used for the production of these composites to react with TiNi alloys. If the alloys did not react with TiNi alloy, as in the case of stainless steel, the explosion welding resulted in significant plastic deform",
author = "S. Belyaev and V. Rubanik and N. Resnina and Rubanik, {V. Jr.} and E. Demidova and I. Lomakin",
year = "2016",
doi = "10.1016/j.jmatprotec.2016.04.004",
language = "English",
volume = "234",
pages = "323--331",
journal = "Journal of Materials Processing Technology",
issn = "0924-0136",
publisher = "Elsevier",

}

Bimetallic shape memory alloy composites produced by explosion welding: Structure and martensitic transformation. / Belyaev, S.; Rubanik, V.; Resnina, N.; Rubanik, V. Jr.; Demidova, E.; Lomakin, I.

In: Journal of Materials Processing Technology, Vol. 234, 2016, p. 323-331.

Research output: Contribution to journalArticleResearchpeer-review

TY - JOUR

T1 - Bimetallic shape memory alloy composites produced by explosion welding: Structure and martensitic transformation

AU - Belyaev, S.

AU - Rubanik, V.

AU - Resnina, N.

AU - Rubanik, V. Jr.

AU - Demidova, E.

AU - Lomakin, I.

PY - 2016

Y1 - 2016

N2 - © 2016 Elsevier B.V. All rights reserved. The aim of the present work was a study of the influence of explosion welding on the grain structure, chemical composition, phase composition and phase transitions in bimetallic shape memory composites containing the TiNi shape memory alloy as an active layer and one of four alloys having different abilities to react with TiNi alloys as passive layer. Stainless steel was chosen as a non-reacted material, TiNi alloy was used as the alloy with close chemical composition, and Ti6Al4 V alloy and copper beryllium (C17200) alloy were chosen as materials which might react with TiNi alloy to form new phases. The results of the study showed that variations in the grain structure and properties of the layers in the bimetal composite depended on the ability of the alloys used for the production of these composites to react with TiNi alloys. If the alloys did not react with TiNi alloy, as in the case of stainless steel, the explosion welding resulted in significant plastic deform

AB - © 2016 Elsevier B.V. All rights reserved. The aim of the present work was a study of the influence of explosion welding on the grain structure, chemical composition, phase composition and phase transitions in bimetallic shape memory composites containing the TiNi shape memory alloy as an active layer and one of four alloys having different abilities to react with TiNi alloys as passive layer. Stainless steel was chosen as a non-reacted material, TiNi alloy was used as the alloy with close chemical composition, and Ti6Al4 V alloy and copper beryllium (C17200) alloy were chosen as materials which might react with TiNi alloy to form new phases. The results of the study showed that variations in the grain structure and properties of the layers in the bimetal composite depended on the ability of the alloys used for the production of these composites to react with TiNi alloys. If the alloys did not react with TiNi alloy, as in the case of stainless steel, the explosion welding resulted in significant plastic deform

U2 - 10.1016/j.jmatprotec.2016.04.004

DO - 10.1016/j.jmatprotec.2016.04.004

M3 - Article

VL - 234

SP - 323

EP - 331

JO - Journal of Materials Processing Technology

JF - Journal of Materials Processing Technology

SN - 0924-0136

ER -