Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

8 Citations (Scopus)

Abstract

Residual strain accumulation during thermal cycling of the Ti50Ni50 alloy under a constant stress of 200 MPa through the temperature range of complete and incomplete forward martensitic transformation was studied. The temperature range of the forward martensitic transformation during thermal cycling was chosen as 25, 50, 75, or 100% of the M (s)-M (f) interval measured in the first cycle. It was shown that intensive accumulation of residual strain took place in the last stage of the forward transformation. It was observed that resistivity increased more rapidly with an increase of the fraction of the temperature range of forward martensitic transformation.
Original languageEnglish
Title of host publicationAccumulation of Residual Strain in TiNi Alloy During Thermal Cycling
Pages2339-2342
DOIs
StatePublished - 2014

Cite this

Belyaev, S., Resnina, N., & Sibirev, A. (2014). Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. In Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling (pp. 2339-2342) https://doi.org/10.1007/s11665-014-0982-z
Belyaev, S. ; Resnina, N. ; Sibirev, A. / Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. 2014. pp. 2339-2342
@inproceedings{c7ed28d696f84ff3925d255dccc90e4b,
title = "Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling",
abstract = "Residual strain accumulation during thermal cycling of the Ti50Ni50 alloy under a constant stress of 200 MPa through the temperature range of complete and incomplete forward martensitic transformation was studied. The temperature range of the forward martensitic transformation during thermal cycling was chosen as 25, 50, 75, or 100{\%} of the M (s)-M (f) interval measured in the first cycle. It was shown that intensive accumulation of residual strain took place in the last stage of the forward transformation. It was observed that resistivity increased more rapidly with an increase of the fraction of the temperature range of forward martensitic transformation.",
author = "S. Belyaev and N. Resnina and A. Sibirev",
year = "2014",
doi = "10.1007/s11665-014-0982-z",
language = "English",
pages = "2339--2342",
booktitle = "Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling",

}

Belyaev, S, Resnina, N & Sibirev, A 2014, Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. in Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. pp. 2339-2342. https://doi.org/10.1007/s11665-014-0982-z

Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. / Belyaev, S.; Resnina, N.; Sibirev, A.

Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. 2014. p. 2339-2342.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

TY - GEN

T1 - Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling

AU - Belyaev, S.

AU - Resnina, N.

AU - Sibirev, A.

PY - 2014

Y1 - 2014

N2 - Residual strain accumulation during thermal cycling of the Ti50Ni50 alloy under a constant stress of 200 MPa through the temperature range of complete and incomplete forward martensitic transformation was studied. The temperature range of the forward martensitic transformation during thermal cycling was chosen as 25, 50, 75, or 100% of the M (s)-M (f) interval measured in the first cycle. It was shown that intensive accumulation of residual strain took place in the last stage of the forward transformation. It was observed that resistivity increased more rapidly with an increase of the fraction of the temperature range of forward martensitic transformation.

AB - Residual strain accumulation during thermal cycling of the Ti50Ni50 alloy under a constant stress of 200 MPa through the temperature range of complete and incomplete forward martensitic transformation was studied. The temperature range of the forward martensitic transformation during thermal cycling was chosen as 25, 50, 75, or 100% of the M (s)-M (f) interval measured in the first cycle. It was shown that intensive accumulation of residual strain took place in the last stage of the forward transformation. It was observed that resistivity increased more rapidly with an increase of the fraction of the temperature range of forward martensitic transformation.

U2 - 10.1007/s11665-014-0982-z

DO - 10.1007/s11665-014-0982-z

M3 - Conference contribution

SP - 2339

EP - 2342

BT - Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling

ER -

Belyaev S, Resnina N, Sibirev A. Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. In Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling. 2014. p. 2339-2342 https://doi.org/10.1007/s11665-014-0982-z